Osprey 40, definitely. The Major should have them in stock. I have a YHM Cobra M1 (it's very loud dry and shooting wet is annoying) and am upgrading to an Osprey 40 for my HK USP40 Tactical. I hope to have my stamp back sometime in September.

This might not fit into your budget limit, but it will give you ideas. It's my 2 year $9k (including cases, ammo, etc.) LWRCI M6A3 build: http://forum.lwrci.com/newforum/viewtopic.php?f=6&t=2477 Latest pics and video (scroll down): http://forum.lwrci.com/newforum/viewtopic.php?f=6&t=2477&...

I have a YHM Cobra 40 (not an M2) for my HK USP40 Tactical, which is loud dry (ears ring) and OK wet (messy). My dealer has my Osprey 40 in his safe as of the other day and the paperwork was sent in June. I hope I can shoot it exclusively dry without ears ringing.

Nice work! My Osprey 40 just shipped from the Major to my local dealer today. Can't wait to put it on my USP40 Tactical! I'm not sure when my dealer sent my form 4 in.

The point of the Osprey is to not need coolant at all. This is why I'm getting an Osprey 40 to replace my old Cobra 40.

However, I suppose a gelled Osprey could be unscrewed a quarter turn while the host weapon is on its side and you could tighten it before use, thereby managing the gel pool.

I have an HK USP40 for which I found a factory 14.5X1 LH threaded O-ring barrel at Midway. I bought O-rings to go with it and had to get the barrel fitted by a gunsmith so the slide wouldn't shave the O-ring on one side. I can still use the standard barrel but just keep the threaded barrel on with a...

What I meant by "ambidextrous version of the BAD" is that the leftward extension of the device before it goes back to the right in order to pass through the trigger area looks like it is intended to be usable with the left trigger finger in a similar but opposite fashion from the right fin...

Troy has an ambidextrous version of the B.A.D. Check out the upper left hand corner inset marked "Ambidextrous Bolt Release" in the picure on the left: http://store.troyind.com/v/vspfiles/photos/categories/152.jpg Page link: http://store.troyind.com/category_s/152.htm Gentlemen, start your...

I hate to say it, but the lack of a TiRant 40 is driving me toward the Osprey 40. It has actually made the decision process much easier. I'm saving up for it now and am almost there. I want something holsterable anyway.

I did some experimentation last week with camera placement and distance, as having the camera at 10 yards makes the unsuppressed footage pointless, as the camera filters down the sound level: http://i827.photobucket.com/albums/zz194/pcprosystems/th_M6A3_and_SPR_M4_4_23_10.jpg I took the above video ...

If I didn't have 2 jobs and 3 kids, I'd have time to read everything on that forum. I wasn't aware of these confrontations as I don't pay attention to such things. I only pay attention to the quality of his products I own, the posts that are relevant to the gear I own when they are helpful and when ...

After reading this (and for quite some time before), my opinion is that he is not:

http://www.ar15.com/forums/topic.html?b ... 9&t=188808

CATIA is also used by Cessna, Boeing, Vought, Spirit, Gulfstream, etc.

It'll do everything (machine parts, sheetmetal, surfaces, kinematics, stress analysis, etc.), but there's a learning curve to it. This is what documentation and practice models are for.

I'm running CATIA V5 R19 and like it very much.

You're very welcome, gentlemen! I wanted to post a video that I've always wanted to see but no one has made. Bryon, The trunk monkey is one of my favorites! In the bed of my truck, I guess I'm the bed bastard? Thanks again for a really great transfer! If I can get the dollars together, I'm buying an...

My HK USP40 with YHM Cobra 40 and LWRCI M6A3 with AAC SPR/M4, unsuppressed and then suppressed for comparison:



The gear:


Enjoy!

I have recently done the RTV fix on my LWRC M6A3's Armadynamics ambidextrous charging handle (LaRue has them) and put the high temp red on first with a coat of the lower temp black stuff over the top on the area visible when the handle is all the way forward. There's still a little bit of gas escapi...

Thanks, guys! I got it out on Friday! Here's my range report: So, I put about 150 rounds downrange yesterday. I didn't take pictures, as I was pressed for time after work (got off at 1100 and to the range at 1300) but before having to pick kids up from school. The range was my buddy's land up agains...

Can in hand! It is awesome! The multicam pouch from AAC was a pleasant surprise: http://i827.photobucket.com/albums/zz194/pcprosystems/LWRC_M6A3_and_USP40.jpg http://i827.photobucket.com/albums/zz194/pcprosystems/LWRC_M6A3_with_AAC_SPR_M4_01.jpg http://i827.photobucket.com/albums/zz194/pcprosystems/...

Thanks, gentlemen!

Latest pictures of my build with the new 9"-13" Harris bipod on Integral LaRue QD mount and all of my PMAGs: http://i827.photobucket.com/albums/zz194/pcprosystems/01M6A3withPMAGsLeftSide.jpg http://i827.photobucket.com/albums/zz194/pcprosystems/02M6A3withPMAGsRightSide.jpg PMAG 20s work wi...

Is a 14.5 X 1 LH thread mount available for the TiRant 45? I'm curious what the performance loss is compared to the dedicated .40 version. I'll buy a .40 TiRant if available as soon as funds are saved up! I have a YHM Cobra 40 (not M2) for my USP40 that needs to be superceded.

NFA Item: AAC SPR/M4
Form Type: Form 4
Transferee Type: LLC
Forms Sent: 1/8/2010
Check cashed: ? (Used a Postal Money Order)
Pending Date: 2/3/2010
Approved Date: 3/8/2010
Forms Received: 3/15/2010
Can in hand: 3/18/2010
Examiner Name: Suzanne Santamaria

Major, you make my privates stand at attention.

Any possibility to get that Cobra M2 in .40 S&W if I win?

No. It's closed at the front. However, check out the bottom picture:
http://soldiersystems.net/2010/01/20/cr ... verything/

The Crye Precision Gun Clip. It would work.