I've had some triggers worked on by Bill... they're 'ok'. Better than stock anyway. Look for a CMC if you want a better option. A Jard trigger would probably work real well for what you're wanting to do, and they can be had for ~$130 to $140. You can go from 1lb to 4lb pull with them, depending on w...

66427vette wrote:Never going to happen.

This.

continuity wrote:Glad I live in Ohio...

I am too...

laxguy59 wrote: I can run mine with CCI subsonics, CCI standards, Remington subs, essentially whatever. It may be worth videoing since so many people have trouble with theirs.

Same here, no issues at all. With either the stock barrel, or the threaded HDD.

strobro32 wrote:I'm going to do this. Courtesy of the work from bkoski and ssnfa.

viewtopic.php?f=2&t=59405

How cool! What is that barrel, like 1"?

The 21A is a higher quality gun... it's steel, and just better built. The downfall of the 21A is it's sights, they are all but nonexistent. P22's are light, fun to shoot, fairly accurate (they do have decent sights), and carry 3 extra rounds. The P22's downfall is that they have been known to have t...

Another piggyback here... if moving to another state (that allows NFA, obviously), do you have to notify the local LEO in the area you are moving to, or just the NFA branch? At a Federal level no but there are some states that require permission slips from State level to have them. Check the state ...

Another piggyback here... if moving to another state (that allows NFA, obviously), do you have to notify the local LEO in the area you are moving to, or just the NFA branch?

There is the Griffin armament checkmate. I have one and it works great. of all the cans i've seen pics of , this one eludes for some reasone and i'm thinkin about gettin one. GIVE US PICS OR GIVE US DEATH!!!! Not that you asked, but you would be better served putting that money on a Spectre II. I b...

Does anyone out there know going rate for the three tippmann miniature machine guns NIB I have seen some prices but nothing that is stable enough for me to attempt to Sell them They are all transferable I've seen several in the past 4 mos or so... they were on the block at $20K - $22K. Don't have a...

Well, after being absent from 300BLKtalk for a month the Alpha rep FINALLY showed up with this to say: Sorry about the delay in my response. With the increased sales & call volume it's hard for us to respond to all forum requests timely. Bottom line, if you have a problem with with our barrels ...

Mmmm, billet!

The original QMF had a rounded end cap versus a flat one... hence the "corndog" comparison.

Don't fool yourself, penetration at short range isn't that much different from the tests I've seen. Low recoil slugs and buckshot will be penetrating the wall and whatever is behind it. Well, I said "reducing the NUMBER of walls", not the wall behind whatever you are shooting at. Besides,...

The way I see it, recoil tolerance doesn't have much to do with it, although it may be the motivation for some. Reduced recoil rounds are designed as a close-range / home-defense type round. You're not giving up that much in performance, but you ARE reducing the number of walls, etc, that it is goin...

I think he already did elaborate when he stated that the models you were referring to are different from the models the original poster asked about.

I have to say, after many years of being a fan of pumps, I now put my trust in an 1100. it's the definition of reliable fire power!

Good, glad it's an improvement... I have two that just came in, sitting here for my 1100's. But I knew when I bought them that fitting would be required. I thought from your first post that maybe you weren't happy with their performance.

Call, or don't call... it won't speed it up OR slow it down. I like to know that mine actually went pending so that I KNOW it's in the que, and after that I forget about it. I've heard several stories where people waited for months after check cashing, only to find out they weren't even in "the...

Care to elaborate?

Good, glad to hear it... hope you get it back soon.

I am. Just joined, thanks for the heads-up.

We have installed several of these in our plant, they use them for R&D... VERY cool technology! one of them is a laser metal printer.

That's me in the vid (yeah, I know, no eye pro...) Anyways, the full size 45 barrels fit/function in the mid/compacts just fine. Did you relieve the top outer edge of the hole in the end of the slide to make it work, or did it just drop in? I couldn't make the barrel go in to save my life when I tr...

got off the phone with em a second ago, the guy said they dont interchange, with the m and ps...oh well I'm NOT saying this will interchange or not, but in my experience you can't always trust the mfg's word on this... I'm pretty sure most of them will tell you it doesn't fit, even if it does. Mayb...

Like I said, maybe yours will be ok. Some guys have gotten their stuff back within a couple of months, but based on my limited experience and what I've read on this site about other's experiences, no way will I send them anything OR recommend them to anyone else. Do a search here on the site for pro...