Isis 2 is "cheap", until you factor in all the adapters. You couldn't give me a GT can(well, maybe). Save another 130, and get an Octane 45.

I used blue on my Walther Colt clone. I would have preferred red, but you have to loosen it to pull the rear pin for cleaning. My Spectre 2 hasn't gotten "stuck", so it hasn't been an issue.

First thing to do is contact the manufacturer of your suppressor, and ask them what the minimum barrel length would be, then decide from there.

I'm happy with my M&P 22 full size. Reliable through a high round count, and the action noise isn't too loud. If I keep the slide from moving with my thumb, it sounds just a hair quieter than normal.

I was told no to .270, so I'm going to say .284 is out as well.

bakerjw wrote: I am considered overweight at 195 and yet can cycle 1000 miles a day without a problem.

Damn, that's a LOT of pedaling.

landlubbers



Great pics, and write up.

Do you recall SiCo specifically stating the Hybrid is GTG up to .338L? A few other attendees or at least the posts are reporting .458SOCOM/45-70Gv't. By the way, thanks for taking the time to attend and to report back. Your reviews are instrumental to a lot of our decision making. SilCo e-blast sai...

AAC's new 9mm can is a round, eccentric design.

Porting probably isn't necessary, unless you are using off the shelf ammo. I have a Ruger 77/357 that I had cut to 10.5", and use a Silencerco Octane on it. With my hand loads, I can keep both .38SPL, and .357 Mag subsonic. Accuracy out to 100yds is phenomenal, and it hits like a sledgehammer. ...

Add an adjustable gas block as well, and you'll be amazed. My side charger is a dream to shoot.

SRS is trying to lock people into their can. 3/4x24 is a "bastard" thread for 7.62 suppressors, and muzzle devices. AAC is using the industry wide thread pattern. Re-thread, and enjoy your rifle.

Neat idea.

FNH is coming out with a semiautomatic SAW, so there ya go.

I've got one in .243 coming in Friday, and will post a mini review, with range report for you.

I added a 20# spring to my G19(Gen 4), and it is 100% reliable over 250 rounds with my Octane 9. There is a noticeable difference between it, and the OE spring. No malfunctions using anything from 115gr WWB, to 147gr HPs.

Mike isn't with them anymore, I don't know where he went though.

http://www.silencershop.com/silencers/5-56mm-rifle/surefire-socom-556-mini-monster.html http://www.silencershop.com/silencers/5-56mm-rifle/knight-s-armament-5-56-qdc-suppressor.html? http://www.silencershop.com/silencers/5-56mm-rifle/silencerco-specwar-k-556.html Don't know much about this one: http...

0101silent wrote:

whiterussian1974 wrote: And the slits in the barrel are EDMed to vent gas into coaxial chambers and sequester off boreline until the later chambers begin to normalize.

If you don't mind where do you send the barrel out to get EDM'd and what does it cost?

http://www.magnaport.com/index.html

True, but it leaves room for restrictions on non citizens. On the federal level at least.

Article I Section 2 of the Constitution says... The House of Representatives shall be composed of members chosen every second year by the people of the several states, and the electors in each state shall have the qualifications requisite for electors of the most numerous branch of the state legisl...

I had the factory adapter on my FVSR, but have recently removed it, and have been running it directly. I didn't like the stepped look, and haven't had any issues after a couple of bricks.

If you've already got one in your trust, and a couple in your personal individual name, you just fill out a Form 4 from you, John Q. Smith, to you, John Q. Smith, Trustee- use the Form 4 for the can that the trust already has approved as a template in the Transferee section. You're overthinking thi...

I had to use Chrome for mine.

Looks like Silencer Shop has them in stock.

www.curtistactical.com

He is a board member.