My buddy Doug Hall built this 10 years ago

Having fun at Red Hills 2012 Machine gun shoot

He has now finially put a finish on it....what a Frankenstein!!

https://www.youtube.com/watch?v=PyX2YHehVLE

I believe M2' barrels only have stellite lined chambers

definitly not entirely made from stellite

Has anyone here machined stellite?

I would look at some of the solvents that are safe for aluminum and disolve copper

boretech copper eliminator work well for me

Capt. Link. wrote:I will never recommend the use of any tap for a suppressor as a lathe should be used for accuracy.
Proper tap selection and this product has helped me:

You never use a tap but you use a tap

There are taps ground just for Stainless steels with proper angles and relieves Pick the right tap also, starting tap vs bottoming tap I inspect the tap, align with tail stock, and what I have not heard that is very important use a good cutting oil. I use an oil with molly lube. Many people also try...

How did you make the baffles? I can't tell if they were hydraulically pressed or CNC'd from a billet. Either way nice job. So the baffles welded together after you took that picture I take it? It's a non-serviceable sealed can? CNC milled from billet grade 5 17.01 per inch for bar stock Tube grade ...

wacki wrote:Name brand of bull barrel?

What kind of can is that? Looks like a titanium Octane 9 HD with vent holes.

Stoner 18" I cut off just behind the existing gas port

Suppresser, my partner and I designed and built

Holes you see are for rosett welding the baffles

I am moving. I was hopping to get my suppressor before I moved but it looks like I wont. Any way I contacted the ATF and they sent the forms back to my dealer. I am told I need to have new forms filled out with the new sheriffs signature and new pictures. I am still in the same state but on the oth...

Hey. What's the thread pattern for the silencer? And is there some kind of standard? I have been wanting to do something like that withe the Beowulf. Thanks. Since I started with a bull barrel, I cut to length, turned the barrel for my custom gas block I picked a thread dia. that would give me the ...

More load and DB testing next weekend

Thanks!!

50 Beowulf AR upper Stock recoil / buffer system 9.25" barrel Full titanium suppressor 500g Hornady XTP 982fps Cycles 100% http://216.92.217.113/saiga/images/IMG_1394.JPG http://216.92.217.113/saiga/images/9_inch_w_TI_50_beo_can.jpg http://216.92.217.113/saiga/images/Suppressor_assembly.jpg

I'm using a B&K 2209 and a 4136 1/4" mic calibrated by B&K in jan 2013 I just tested a 300 winmag, shooting prone, outdoors of coarse w/ 26" barrel with meter set on Peak lmp. Hold meter set 6" beside my right ear and am getting a 160db reading with no muzzle device attached T...

And another thread goes cold

Where is subsonic 50 beo lurking