EBAY

Careful removing the FH on a M&P 15-22. You will need to clamp on to the barrel or you will destroy the upper or ejector. They sure do put those things on pretty tight. I took mine off yesterday. Hope I didn't screw anything up in the process.....I just held the entire gun between my legs and u...

Ive got one I did a lot of custom suppressor work on
Check out this video on YouTube:

http://www.youtube.com/watch?v=UKpfdf3b ... ata_player

you will have a tough time finding drawings. Most people form 1 builders come p with a basic design and build from them without dimensioned drawings. There is also the issue of patent infringement. I agree Before the stainless sparrow came out I wanted one so bad I design my own lol And now I can't...

Thanks very much for the input..... I agree I should start using a ball endmill and do a solid pass through the skirt and bore I'll try it

7075 aluminum http://i114.photobucket.com/albums/n242/zevdogs/9FC4F765-4B17-481E-9F9E-EE94842FB683-20302-000000E892416413.jpg http://i114.photobucket.com/albums/n242/zevdogs/C17A7474-566D-468A-B401-0EF0F317ECB9-20302-000000E89A82417D.jpg http://i114.photobucket.com/albums/n242/zevdogs/9D28B965-7A9A-...

Is the point of shift different with the suppressor ???

Mine is not a pistol but it is suppressed and used as a bunny gun
YouTube link
http://www.youtube.com/watch?v=UKpfdf3b ... ata_player

I don't think I would like the M&P as a suppressed pistol because their are so many other great options

Kepp the barel away from the rest of the gun untill it's welded and your fine... I've heard it needs to be pinned

I wanted the same option but this is what I did

http://www.youtube.com/watch?v=UKpfdf3b ... ata_player

Historian wrote:Brownells used to sell taps & dies for this pitch.

eBay is whear I bought mine

What is a good reasonable lathe, looking at this grizzly model, Im not a very wealthy person, just a marine living on a budget, with some hobby time, LoL So any info will be accounted for in my journey.. The threading of the tube and ends cut into end caps and threading is what I have left,... the ...

My M&P






YOUTUBE
http://www.youtube.com/watch?v=UKpfdf3b ... ata_player

zevdogs I have always held your work in high esteem its super clean, next I'm going to hear the Easter bunny not coming. :shock: Thanks.... Lol for the record dial in the barrel and single point is the best way but taps and Dias are a tool..... just like shaving with an open blade is very easy if y...

It's easy just turn the diameter to .500 and make sure it's concentric to the bore and use a die to thred it http://bit.ly/UDUZK5 I doo them all the time .. A little 15 minute job goes for around 100.00 Excuse my ignorance but if you have a lathe to turn down the barrel why would you not use the la...

It's easy just turn the diameter to .500 and make sure it's concentric to the bore and use a die to thred it
http://bit.ly/UDUZK5
I doo them all the time .. A little 15 minute job goes for around 100.00

Lol reminds of this Utah bill exempting you from federal regulation on suppressors and guns made in the state..... No challenge ore supreme court ruling after 2 years ??

http://le.utah.gov/~2010/bills/sbillint/sb0011.pdf

Just buy it ..... NOT lol
http://www.rh-custom.se/product.php?id_product=32

Your barrel would be huge like 1.5 dia and no one has a barrel like that so just pin and weld a suppressor on the end http://i114.photobucket.com/albums/n242/zevdogs/377ca232.jpg http://i114.photobucket.com/albums/n242/zevdogs/d600acda.jpg http://www.youtube.com/watch?v=UKpfdf3bcRU&feature=youtu...

I've always used moly for suppressors but would like your opinion on Cerakote

Lol better not mess with my ammo them.... I think my threaded end caps make the suppressor to heavy.... Baffles are are great weight but the 304 tube and caps are all the weight
I'll bore out the front end cap

Bendersquint wrote:

zevdogs wrote:Got my 9 pound recoil coil spring today and now my pistol cycles great.... Bought it from gunsprings.com.... 7.99 each

With a 9lb recoil spring you can probably get it cycling with 1/2 the recommended powder charge!

Oooo maybe even quieter ???

Got my 9 pound recoil coil spring today and now my pistol cycles great.... Bought it from gunsprings.com.... 7.99 each

How does it cycle with no gas tube ?? I appreciate the feedback on this. I guess the price was what attracted me, as you can get one for about $675.00 I'm in Michigan, a No-SBR state, so I have to build it as one piece from the chamber, and I'm really not sure how to do that on a standard AR The cy...

The Colt 9mm AR-15 don't have a gas tube and it works great suppressed