thanks for the answers.

but you are saying that if my dad were to pass away, there would be a way to transfer any of his NFA items to me? I was under the impression that if they couldn't sign a form 4 there was no way to transfer it, and it would have to be destroyed

haha if you SBR'd that, the look would remind me of a Desert eagle 50 with a stock

now you need to take off the lcd viewer on the camera, lengthen the wire up a little, and attach the screen to a night vision flip down head harness thingy (whatever it is called) and then you can shoot around corners both directions easily without sticking your head out! :D This says it has RCA ca...

so if you put your items in a trust and you pass away, can somebody else on the trust take possession without any paperwork?

now you need to take off the lcd viewer on the camera, lengthen the wire up a little, and attach the screen to a night vision flip down head harness thingy (whatever it is called) and then you can shoot around corners both directions easily without sticking your head out!

the question is how many ports can you drill, and how close, without compromising the structural integrity of the barrel?

I like that. Does it feel fairly durable? Any trickiness getting it on? yeah it is really durable! I leave the can on when I lean my rifle in the corner, and it has been dropped a few times but it is really sturdy.. every part with threads has a nice flat surface that butts up when tightened to kee...

interrupted threads do lose some surface, and I don't know what kind of pressures cans bigger than 22lr are approaching.. you could also do thirds or 1/4's instead of half interrupted threads, then the threaded surface grabbing is more equally spread around. so you don't think that design would work...

though I must say, all of his insults are worded quite eloquently and I admire him for that.

Robert posted these and they are too good to pass up.............Comedy Gold. Seriously, take a look at a true insult poet in action, yeah, it'd be easier for him to call people "asshole, dickhead, fuckface"............but no, that was below Devil Doc. He machined insults out of Inconel.....

the one comment I would have on your design is you said that you would like to put an o-ring on the end by the tube cap threads.. I know a .22lr is a lot dirtier than a .223 would be, but with my .22 can I first had an o-ring on the far end and the problem with that is that your o-ring will have to ...

Okay Mongo. I am sorry that you've been going through these trials and struggles. But I also have to admit that I've thoroughly enjoyed your posts. As they say, "When life gives you lemons make lemonade." Just remember, never underestimate the entertainment value of a dollar bill and a pi...

edit: sorry if this doesn't apply to your mounting system, but it worked great for me :) I don't know what kind of mounting system you have but it is easy enough to make an interrupted thread quick detach if its a single point mount.. just a rough idea, not to scale by any means http://i289.photobuc...

good reading! I hope you get out of there soon though!

..all the stories kinda remind me of my freshman dorm building last year haha

from what I have seen, lone wolf barrels have a steeper feed ramp because it is a reinforced chamber right? is it just something to do with that? or could it be that the slide isn't quite coming all the way back, so the barrel isn't tilting far enough down? maybe just a spring adjustment.. please ke...

people should make a list of all those Brady Bunch people then set up a sign on there front lawn that THIS home will not defend them self using arms then see result :wink: that is a very good idea! I bet they would change their views pretty quick after their house gets broken into a few times :twis...

hemi wrote:

just had to stir it up again didn't ya? this is the thread that never ends

I admire your work! great idea

.25 is sufficient, given your threads are bore-concentric. I always do 110% of nominal caliber, rounded up to the nearest multiple of 5. I agree, mine was about 7inches and .25 worked fine. Just make sure your threads are bore concentric and it helps if the can is designed to butt up against the gu...

the one I made was very similar to the first one you have pictured, It works great if you have access to the machinery to make it, the dimensions look good also. Someone else already mentioned that the second one has too big of an expansion chamber for a .22, I second that

Ride motorcycles, rebuild/repair motorcycles, mechanics and shop work, machining, diving, fix electronics- mainly xboxs, mod gaming systems, and making sheath knives (not quite as fancy as those nice Damascus ones but I have sold some for over $100) J Krammes, amazing work :D I hope someday I may be...

I guess the good news is if these weren't on loan to S.Korea and due to come into the CMP. If the Koreans own them, all they have to do is wait until the next administration I would think and try again. Would have been a sadder day if 800k classics ended up in the shredder. our administration will ...

http://www.theepicenter.com sells the civi versions--they come in a clear bag instead of a tan one, but are otherwise pretty close to the real deal. They've got three brands, but I think the Sopakco are the closest to an issued MRE. $72/case + shipping, with heaters. It appears that those clear one...

case B tastes better than case A, but generally I actually like MREs.. you can basically tell by the name if it will be good, the vegetarian burger I don't much care for. I think they have an inspection date for five years, but I have heard they are good for ~20 or more. I ate some last year that ha...