I think it would be too long.

Don't know it they make different types but the one that came with my can fit just fine on an AR10. Did you mount the flash hider with no washer at all and the flash hider goes all the way back to the shoulder? If so, either you have a flash hider with the 0.750" deep socket or you got one of ...

Do you still make the 5/8"-24 18-tooth mounts with an approximately 0.750" deep socket? Armalite makes their barrels with a long course of threads. If you still make them, do you have them in stock?

Did Ops Inc ever even make any of the .50BMG suppressors for commercial sale?

1/2"-28, 7/16"-24, or 3/8"-24?

I just looked inside and saw a whole lotta baffles.

It looks like tall sightsbarely clear anyways. When you look at the first pic you can see that. The listed width is 1.3" so the suppressor obstructs the sights just as much as any round suppressor with a diameter of 1.3" would.

okent wrote:My hat's off to John for testing dB at the shooters ear.
Thanks John!

Why is his "at the ear" reading taken 90 deg to the side? If you are going to take an at the ear reading why not put a microphone beside your head?

James DeGroat wrote:The Nano suppressor is not back in stock and I will be taking orders again. Dealers looking to stock the Nano e-mail me for pricing.

Is that supposed to be not or now back in stock?

In all fairness, how much you spent on everything else is not AAC's problem and not the issue here. You want to buy something that isn't available right now, so do alot of people from alot of different manufacturers in every imaginable industry. If you knew the barrels were going to be a certain thr...

They used to sell more items from other manufacturers; Remington 870 and Mossberg M590A1 AOWs, SCRC and Gemtech suppressors, London Bridge Trading Co nylon gear, and other small parts.

It has one blast baffle and the endcap, that's it.

Will we get a heads up before they ship to us?

Do you have any of the 12" 300 Whisper suppressors built and ready to transfer right now? Am I correct in that they are only bored out enough for a .30 projectile and not for a .338 or 9mm?

I ordered three NANOs but I never actually said whether I wanted them 1/2"-28 or M13.5x1LH.

So you would end up with a home-made $600 mount?

Just let me trade the two of you some new dual-spring mount 762-SDs for those odball ratchet mount versions and you will have it much easier.

Extra brand new unmounted AAC Blackouts, 1/2"-28, 9/16"-24(Mini-14 GB, AC-556, FAL) and 5/8"-24, $97 shipped for the first and $92 each after that.

When do we need to let you know which thread pitch we need? I know you could do the Form 3s without knowing because the tube isn't tyed to the thread pitch of the base.

With the CZ 452 American 16" that is factory threaded 1/2"-20 you can get a spare 1/2"-20 base from SWR instead of one of the 1/2"-20 to 1/2"-28 adapters from someone else. The fewer parts, the better.

"B&T" and nobody gets offended.

Last I heard was they want you to send in your old spring to be replaced.

Is your barrel a 16" or 20"?

Have there been that many Ospreys shipped?

The colt/Umarex does not use the same adapter as a P22. They have the same thread pitch, but htat is all. A P22 adapter will thread on, but only part of the way and stick out from the outer barrel cover. The Gemtech Colt/Umarex adapter goes down flush.