State law #1
Uber law, no such thing.

(Screw them)

A spade type tool bit works if you do not push it hard. Ball endmills clamped in a tool holder can also work.
Ti is abrasive and generates heat. Don't push hard and take you time and you can carve it out.

Pressed and welded mounting end / muzzle end is threaded tube ID and end cap. http://i1329.photobucket.com/albums/w560/jkh62/titanium%20308%20can/NCM_0159_zpscnqy6sit.jpg http://i1329.photobucket.com/albums/w560/jkh62/titanium%20308%20can/NCM_0174_zpsizkck01c.jpg http://i1329.photobucket.com/albums/...

I used .070" wall tube and 24 pitch threads for the end cap.

( Rifle length 16' barrel / .30 caliber can Grade 9 tube )

Depends on your shooting skills. Me, my boy, and my neighbor all shoot pistols at those ranges and most times better than those rifle groups posted. :mrgreen: ( we do shoot daily though) Hell, with rifle they better damn we'll be touching if rested and on 3" -4" swingers un rested. if you...

doubloon wrote:

cal50 wrote:... a better launcher , even in .45.
...

Very nice.

A few surprised woodchucks would have a different reply,lol.

Amazing sound 230 hardball makes thumping a soft critter downrange.


viewtopic.php?f=11&t=129090

Handguns are great.....at handgun ranges and most people get it. For longer distance a rifle platform is a better launcher , even in .45. http://i1329.photobucket.com/albums/w560/jkh62/45%20Enfield/NCM_0090_zpsvl3cyws7.jpg http://i1329.photobucket.com/albums/w560/jkh62/45%20Enfield/NCM_0089_zpsvblgl...

+1 on the Osprey.

A shot of Kroil in that situation sometimes saves your ass.

...I miss getting free bar ends to play with.

( Nice looking baffle )

Any baffle pics yet ????

Good material and a nice price point.

Now if it performs well.......

Had my form 1 trust kicked back for not including the full name.

Joe Blow NFA Trust / incorrect.
Joe Blow NFA Trust Revocable Living Trust / correct.

I had to resubmit and pay the tax again.
The refund took 2 months.

Steel wool or very fine chips and a 9V battery make great fires........

As others have said I would wager that your problem lies with your steady rest. I just spun my titanium tube in my steady rest without any issues. I did indicate the tube end in within .001" run-out then adjusted my steady rest pads to make light contact with the tube and double checked the run...

Home stretch for my titanium build. Muzzle coupling will be pressed into the titanium tube then plug welded and circumference welded full diameter. Measuring the stack and adjusting the length of my blast baffle spacer and threaded end cap thickness. Some of my best ideas and layout work happen here...

I sent JJFU a message last week and told him if they really do meter 78db on an AR with super sonics I would buy 100 of them for his price of $4500 ea. I got no reply. He was tied up. His suppressor likely fell off the desk and is stuck between his time travel machine and the other machine that tur...

Jesse James has declined the offer from Liberty to do the head to head. So the world will never know. Looks like he is taking his ball and going home but never played..... I like technology and new products as much as the next geek but his climes REALLY were impossible and like nothing else in exis...

Jesse James has declined the offer from Liberty to do the head to head. So the world will never know. Looks like he is taking his ball and going home but never played..... I like technology and new products as much as the next geek but his claims REALLY were impossible and like nothing else in exis...

The Aero-Sonic suppressor looks like a vibrator for a horse. I look forward to seeing some real lab metered numbers of a side by side firing session with know performance commercial cans. As others have said his claimed numbers are lower than the action noise of the host weapon. Liberty Suppressors...

The Aero-Sonic suppressor looks like a vibrator for a horse.

I look forward to seeing some real lab metered numbers of a side by side firing session with know performance commercial cans.
As others have said his claimed numbers are lower than the action noise of the host weapon.

Thanks cal50! Definitely going to spring for the thicker tube. Curious what inserts/grade you used to turn your gr5 baffles? What's that weigh in? That's pretty much the way I'm planning to go. I've gotta look at your build, looks awesome! I used some CNMG-432 SiNi coated inserts for chewing down s...

I am wrapping up a .30 caliber build and I used .070 / grade 9 Ti tube and grade 5 for the baffles. The lure of the cheaper tin walled tubing is tempting but spring for the thicker tube. http://i1329.photobucket.com/albums/w560/jkh62/titanium%20308%20can/NCM_0149_zpsfyxh8fex.jpg http://i1329.photobu...

VERY nice!

Ported barrels & .22's are a perfect marriage.
I like the coax / reflex design that slips over the barrel to reduce the OAL using a standard length barrel.

I am thinking of registering another tube before any trust changes and trying to figure out what to build before filing.