Search found 346 matches

by nice shot
Thu Oct 11, 2012 1:11 pm
Forum: Rifle Discussion
Topic: sighting problem - need help
Replies: 15
Views: 1499

sighting problem - need help

So I got to shoot my 300BLK for the first time today and besides the dick that happened to be sharing a range it was a good day. I tried to get the gun close to zero at 25 yds. At 25 yds I was 8" R and 3.5" H. So I adjusted the elevation exactly where I wanted it. . . and no matter what I ...
by nice shot
Wed Oct 10, 2012 9:27 pm
Forum: Silencer Talk
Topic: how clean does my .22 can need to be
Replies: 37
Views: 2868

Re: how clean does my .22 can need to be

I am vaguely sure that I read of someone using a sonic cleaner on baffles... Any thoughts on this? Depends on the material the baffles are fabricated from. Aluminum is a no no, as the cavitation can damage the anodizing and destroy the structure. Titanium is supposedly along the same lines(without ...
by nice shot
Tue Oct 09, 2012 7:48 pm
Forum: Silencer Talk
Topic: how clean does my .22 can need to be
Replies: 37
Views: 2868

Re: how clean does my .22 can need to be

Just went and purchased some of the CCI Quiet that I read about. The box claims they are rated for 710FPS. . . my pellet gun doesnt even shoot that slow. Im gonna give em a spin tomorrow at the range. Also, only paid $2.99 a box of 50. All i need out of them now is a hollow point and we've got the ...
by nice shot
Tue Oct 09, 2012 1:53 pm
Forum: Silencer Talk
Topic: how clean does my .22 can need to be
Replies: 37
Views: 2868

Re: how clean does my .22 can need to be

Just went and purchased some of the CCI Quiet that I read about. The box claims they are rated for 710FPS. . . my pellet gun doesnt even shoot that slow. Im gonna give em a spin tomorrow at the range. Also, only paid $2.99 a box of 50. All i need out of them now is a hollow point and we've got the w...
by nice shot
Wed Oct 03, 2012 11:53 pm
Forum: Hunting
Topic: WHERE shoot at a deer with subsonic loads
Replies: 10
Views: 6315

Re: WHERE shoot at a deer with subsonic loads

I'm more curious about the whole "chihuahua Mexico - New Zealand." I the location. Both countries outlaw suppressor . . . . So which country are you committing a felony in?
by nice shot
Fri Sep 28, 2012 8:39 pm
Forum: Silencersmithing Forum
Topic: My can is still loud with 6 k's.
Replies: 31
Views: 6022

Re: My can is still loud with 6 k's.

Is there anyway you can post up pics of your baffles, and a drawing of your can? Just simply saying "i modeled it after this post" doesnt help since this guy doesnt seem to have the same problem.

Just a shot in the dark, is it a thread together can?
by nice shot
Fri Sep 28, 2012 8:36 pm
Forum: Silencer Talk
Topic: OK to us a Gem-tech M-4 on a 22-243?
Replies: 9
Views: 1208

Re: OK to us a Gem-tech M-4 on a 22-243?

Just a guess, but Im going to guess no.
by nice shot
Tue Sep 25, 2012 9:44 pm
Forum: Silencer Talk
Topic: how clean does my .22 can need to be
Replies: 37
Views: 2868

Re: how clean does my .22 can need to be

Considering how maleable it is. . . . I'd say no. I'd like to see someone create a can out of Titanium (I know its already been done. . . .just wait for it) with a monocore for a .30 Its already been done before and commercially available..........Liberty Freedom. Figures. . . I guess I should have...
by nice shot
Tue Sep 25, 2012 9:42 pm
Forum: Silencer Talk
Topic: At the range today
Replies: 3
Views: 681

Re: At the range today

So I finally went to the range to sight in my Sig Mosquito with John's Guns SP22 can and Insight laser/tactical light. I've shot a bunch of rounds through it but just not at range with set distance and controlled conditions. Total, I've got about 750 rounds through the Mosquito and about 250 of tho...
by nice shot
Tue Sep 25, 2012 7:21 am
Forum: Silencer Talk
Topic: how clean does my .22 can need to be
Replies: 37
Views: 2868

Re: how clean does my .22 can need to be

Considering how maleable it is. . . . I'd say no.

I'd like to see someone create a can out of Titanium (I know its already been done. . . .just wait for it) with a monocore for a .30
by nice shot
Mon Sep 24, 2012 9:20 pm
Forum: Silencer Talk
Topic: tac solutions cascade question
Replies: 14
Views: 1271

Re: tac solutions cascade question

He'll for $165, I say do whatever you feel like doing. . . .

My only regret with mine is not getting a stainless, but when I bought it I didn't think I would be shooting as much as I am now. Maybe you am do a stainless upgrade for the baffles?
by nice shot
Mon Sep 24, 2012 7:54 pm
Forum: Silencer Talk
Topic: how clean does my .22 can need to be
Replies: 37
Views: 2868

Re: how clean does my .22 can need to be

The water won't do anything about the compressed/hardened buildup, just the soot on the surface. H20 WILL rust aluminum, so be sure it is thoroughly dried before storing it. Forget it, if it wont "clean" it, then I wont waste my time. I'll wait the two weeks until I can buy the soda blast...
by nice shot
Mon Sep 24, 2012 3:31 pm
Forum: Silencer Talk
Topic: how clean does my .22 can need to be
Replies: 37
Views: 2868

Re: how clean does my .22 can need to be

If you are going to do anything I would use anti-sieze.[/quote] Im assuming you mean anti seize on the baffels? Also, I had an idea. Would it be ok to put the baffels in some hot water (boiling or just below boiling) in order to heat up all the s--t on them and then brush them clean? I wont have a s...
by nice shot
Mon Sep 24, 2012 8:20 am
Forum: Silencer Talk
Topic: how clean does my .22 can need to be
Replies: 37
Views: 2868

Re: how clean does my .22 can need to be

you actually got an answer from that mess.if so please tell me, half say never and half say yes. The answer I got was basiclaly clean it when performance is affected. Ironically, they were talking about centerfire cans too. . . which made it confusing at times. I think Im going to go with this idea...
by nice shot
Mon Sep 24, 2012 8:16 am
Forum: Silencer Talk
Topic: how clean does my .22 can need to be
Replies: 37
Views: 2868

Re: how clean does my .22 can need to be

I pulled my can off after 500 rds of Remington subsonic ammo and it was dirty, as expected. I read a few reviews and found out that using hopes and other gun cleaners is a no no. . . then read about the vinegar (trying that one next) then read about mineral spirits and vinegar. . . .then read about...
by nice shot
Sun Sep 23, 2012 7:37 pm
Forum: Silencer Talk
Topic: how clean does my .22 can need to be
Replies: 37
Views: 2868

Re: how clean does my .22 can need to be

Just found this. It was the answer to my question (half of it anyways). . . now I just need to figure out how clean is clean? http://www.uzitalk.com/forums/archive/index.php/t-4029.html For added fun - read the part about "clean your suppressor as often as you clean your mufflers on your car&qu...
by nice shot
Sun Sep 23, 2012 7:14 pm
Forum: Silencer Talk
Topic: how clean does my .22 can need to be
Replies: 37
Views: 2868

Re: how clean does my .22 can need to be

10-4

So how clean should it be? Shiny, black but no build up, ???
by nice shot
Sun Sep 23, 2012 6:35 pm
Forum: Silencer Talk
Topic: how clean does my .22 can need to be
Replies: 37
Views: 2868

how clean does my .22 can need to be

I pulled my can off after 500 rds of Remington subsonic ammo and it was dirty, as expected. I read a few reviews and found out that using hopes and other gun cleaners is a no no. . . then read about the vinegar (trying that one next) then read about mineral spirits and vinegar. . . .then read about ...
by nice shot
Sat Sep 08, 2012 9:07 am
Forum: Silencer Talk
Topic: Which Charging Handle For Suppressed Use
Replies: 9
Views: 5011

Re: Which Charging Handle For Suppressed Use

kaotic504 wrote:i would say stick with the BCM. i have a PRI Gas Buster, and i do not find that it actually helps much. i still get gas in my face on my 10.5" Noveske.
You just saved me a couple bucks. I was about to start this same topic.

Thanks buddy.
by nice shot
Sat Sep 08, 2012 9:05 am
Forum: Silencer Talk
Topic: Will be firing my silencer for the first time this week
Replies: 18
Views: 1667

Re: Will be firing my silencer for the first time this week

mcall008 wrote:i have been a longtime lurker here and will be firing my SWR Spectre (on a ruger 10/22) for the first time this week. Any tips/tricks I should know before I shoot? Thanks
Make sure the can is screwed on all the way. . . I'd hate to see a video of a first round baffle strike.
by nice shot
Mon Aug 27, 2012 7:49 pm
Forum: Silencer Talk
Topic: .22lr Mini suppressors
Replies: 19
Views: 4352

Re: .22lr Mini suppressors

I want to be able to carry my 21A suppressed, dog walks for coyotes and such, would it be possible to make a kydex holster for something like the Hunter town Micro (4.5 inch) or the Liberty Runt? Anyonw have any can carry solutions? Id work one up for you made out of kydex for an IWB or OWB set up....
by nice shot
Mon Aug 27, 2012 7:46 pm
Forum: Silencer Talk
Topic: The distance at which a "sonic crack" is created...
Replies: 18
Views: 5884

Re: The distance at which a "sonic crack" is created...

...after exiting the barrel of a firearm at supersonic speeds. I have read that a bullet traveling faster than the speed of sound does not produce a "sonic crack" immediately, but rather that it happens at some distance after exiting the barrel. This is especially noticeable with suppress...
by nice shot
Mon Aug 27, 2012 10:56 am
Forum: Classified Ads
Topic: WTS: 16" 300 BLK Upper
Replies: 2
Views: 444

Re: WTS: 16" 300 BLK Upper

free bump for a hell of a deal. . . just outside of my praice range though.
by nice shot
Mon Aug 27, 2012 10:41 am
Forum: Classified Ads
Topic: 300 BLK AR15 barrels
Replies: 3
Views: 648

Re: 300 BLK AR15 barrels

Hoop wrote:bump


PM'd you. Ready to do the deal today (8/27/12)
by nice shot
Sat Aug 25, 2012 2:40 am
Forum: Survival / Preparedness
Topic: Don't forget the barbed wire.
Replies: 10
Views: 4848

Re: Don't forget the barbed wire.

The small fish hooks with the barbs, on a 40-50 lb test at just above the ankle makes for a great trip wire. Shouldnt do much for determent but rig it to an alarm and theres no chance of them getting it off their pant leg in a huryy. . . thus sounding your alarm repeatedly.