rust
rust
so I used my sealed 30 cal can on my SKS and used cheap surplus ammo. It was fun. I fired around 300 shots. I put the can in the safe and left it for around 4 months. I get it out today and its totally rusty on the inside.
with out opening it up whats my options if any?
I have it in a bucket of oil now
with out opening it up whats my options if any?
I have it in a bucket of oil now
I have two hobbies. Shooting and reloading. The more I do of one the more I can do of the other.
- Bendersquint
- Industry Professional
- Posts: 11357
- Joined: Sat Jan 07, 2006 7:19 pm
- Location: North Carolina
- Contact:
Re: rust
You are doing the only remedy to dealing with rust in a sealed can.sub-sonic wrote:so I used my sealed 30 cal can on my SKS and used cheap surplus ammo. It was fun. I fired around 300 shots. I put the can in the safe and left it for around 4 months. I get it out today and its totally rusty on the inside.
with out opening it up whats my options if any?
I have it in a bucket of oil now
What can?
- Capt. Link.
- Silent But Deadly
- Posts: 2829
- Joined: Wed Oct 17, 2007 9:05 pm
- Location: USA.
Re: rust
If its carbon steel you do have options other than oil.
The only reason after 243 years the government now wants to disarm you is they intend to do something you would shoot them for!
http://www.silencertalk.com/forum/viewtopic.php?f=10&t=79895
http://www.silencertalk.com/forum/viewtopic.php?f=10&t=79895
Re: rust
I have some stuff in a gray bottle that comes from Harbor Freight (& probably elsewhere). It's called EvapoRust. You just dunk the rusty stuff in it for 30 min to overnight depending on how bad it is. I haven't tried it on anything pitted/really bad, but it makes quick work of surface rust. That & a bottle brush would probably do wonders for you.
http://www.youtube.com/watch?v=lsyAg77ljKE Here's a video of some in use. The guy didn't seem too impressed with it but it looks like it did a good job to me considering how little effort was involved.
Also wondered about using it in a US cleaner - that might be a good method to get the insides where a bottle brush won't reach.
http://www.youtube.com/watch?v=lsyAg77ljKE Here's a video of some in use. The guy didn't seem too impressed with it but it looks like it did a good job to me considering how little effort was involved.
Also wondered about using it in a US cleaner - that might be a good method to get the insides where a bottle brush won't reach.
Last edited by CMV on Tue Jan 01, 2013 4:15 pm, edited 1 time in total.
--------------------------------------
"Sorry but you cannot use search at this time. Please try again in a few minutes"
"This board is currently disabled"
These things make me
"Sorry but you cannot use search at this time. Please try again in a few minutes"
"This board is currently disabled"
These things make me
- Capt. Link.
- Silent But Deadly
- Posts: 2829
- Joined: Wed Oct 17, 2007 9:05 pm
- Location: USA.
Re: rust
No you can chemically change iron oxide (red rust) to ferric oxide (black rust) and that can be passivated into a neutral state.MV10 wrote:CLR? Or is that too harsh?Capt. Link. wrote:If its carbon steel you do have options other than oil.
The only reason after 243 years the government now wants to disarm you is they intend to do something you would shoot them for!
http://www.silencertalk.com/forum/viewtopic.php?f=10&t=79895
http://www.silencertalk.com/forum/viewtopic.php?f=10&t=79895
- Bendersquint
- Industry Professional
- Posts: 11357
- Joined: Sat Jan 07, 2006 7:19 pm
- Location: North Carolina
- Contact:
Re: rust
go on.......Capt. Link. wrote:No you can chemically change iron oxide (red rust) to ferric oxide (black rust) and that can be passivated into a neutral state.MV10 wrote:CLR? Or is that too harsh?Capt. Link. wrote:If its carbon steel you do have options other than oil.
- chrismartin
- Silencertalk Goon Squad
- Posts: 4226
- Joined: Sun Mar 12, 2006 7:18 pm
- Location: Tidewater, VA
- Bendersquint
- Industry Professional
- Posts: 11357
- Joined: Sat Jan 07, 2006 7:19 pm
- Location: North Carolina
- Contact:
Re: rust
You could always soak it in CocaCola, I have been told that it dissolves rust!vz58 wrote:There is a rust converter type solution you use on old cars to turn the rust into a hard black coating.... It might be the same stuff you are mentioning.
As far as preventing more there are some very costly solutions IF you can 100% remove the rust prior to the processing.
What can is this?
- Capt. Link.
- Silent But Deadly
- Posts: 2829
- Joined: Wed Oct 17, 2007 9:05 pm
- Location: USA.
Re: rust
Sorry for long delay cutting threads tonight.
You are right chrismartin give that man a +1
But after wards the metal must be sealed or rust will continue.
All oil must be removed dawn dish soap is best.You must scour the metal of rust scale.If you plug the holes with dowel pins and use a lathe or rock tumbler sand or another abrasive could be used.
A mild acid or iodine will etch the metal and bring out fresh mild rust.Boiling water will change the red rust to Black ferric oxide. Ammonia will halt the rusting.
You must have a even coat of fine rust as that will protect the metal.Boiling times between acid treatments is 5 to 10 minutes.followed by a hour long boil in fresh water then the ammonia and flush with clear water add a little oil and your done.Or clean the hell out of it remove all the oil and drop it in a pot of caustic bluing salts.PM me I have bluing pots
You are right chrismartin give that man a +1
But after wards the metal must be sealed or rust will continue.
All oil must be removed dawn dish soap is best.You must scour the metal of rust scale.If you plug the holes with dowel pins and use a lathe or rock tumbler sand or another abrasive could be used.
A mild acid or iodine will etch the metal and bring out fresh mild rust.Boiling water will change the red rust to Black ferric oxide. Ammonia will halt the rusting.
You must have a even coat of fine rust as that will protect the metal.Boiling times between acid treatments is 5 to 10 minutes.followed by a hour long boil in fresh water then the ammonia and flush with clear water add a little oil and your done.Or clean the hell out of it remove all the oil and drop it in a pot of caustic bluing salts.PM me I have bluing pots
The only reason after 243 years the government now wants to disarm you is they intend to do something you would shoot them for!
http://www.silencertalk.com/forum/viewtopic.php?f=10&t=79895
http://www.silencertalk.com/forum/viewtopic.php?f=10&t=79895
Re: rust
The stuff they use in body shops is called Rust Mort, stops rust and turns it black.vz58 wrote:There is a rust converter type solution you use on old cars to turn the rust into a hard black coating.... It might be the same stuff you are mentioning.
Re: rust
I sometimes do the same thing on parts for my '55 Buick with citric acid powder. I bought a big old bag of it on ebay (something like 15 pounds of the stuff) for about $20, and a few teaspoons of it mixed with a gallon of water will clean up old bolts and other small parts in a few hours. However, that black layer has to be scrubbed clean afterwards, which is why I didn't suggest it.
On the other hand, rusted parts that I've cleaned with CLR (which is considerably more expensive, relatively speaking) will come clean with a simple rinse-off.
Citric acid is the reason Coke and certain other food products will remove rust.
On the other hand, rusted parts that I've cleaned with CLR (which is considerably more expensive, relatively speaking) will come clean with a simple rinse-off.
Citric acid is the reason Coke and certain other food products will remove rust.
Modern American political discourse: http://www.youtube.com/watch?v=tpAOwJvTOio
Re: rust
Compliments on your good taste in having a '55 Buick. A gem of the CENTURY.MV10 wrote:I sometimes do the same thing on parts for my '55 Buick with citric acid powder. I bought a big old bag of it on ebay (something like 15 pounds of the stuff) for about $20, and a few teaspoons of it mixed with a gallon of water will clean up old bolts and other small parts in a few hours. However, that black layer has to be scrubbed clean afterwards, which is why I didn't suggest it.
On the other hand, rusted parts that I've cleaned with CLR (which is considerably more expensive, relatively speaking) will come clean with a simple rinse-off.
Citric acid is the reason Coke and certain other food products will remove rust.
Around 3K if I remember.
The two front 'Dolly Partons' were on our 1956 Sedan de Ville. Made applying Blue Coral
fun for a young man.
Back to the more mundane, rust. I have successfully, as posted here sometime ago,
use white vinegar in a plastic pan over night. Then washed with baking soda and water.
I then take quadruple zero steel wool ( XXXX ) to shine the metal. Finish with a wipe of
30W motor oil.
Still having developing chemicals such as a gallon of glacial acetic acid I occasionally mix
10cc's into a quart of water ... N.B. order, please, acid poured slowly into the water, else
reverse order produces a dangerous splash.
Re: rust
this is my 30cal freeze plug silencer
I have it in oil but I will wash it out and try CLR then try to find a way to prevent it rusting again
I have it in oil but I will wash it out and try CLR then try to find a way to prevent it rusting again
I have two hobbies. Shooting and reloading. The more I do of one the more I can do of the other.
Re: rust
I'd try the Evapo-Rust first just because it is less aggressive & harmless to the base metal. And CLR sucks - even for basic household use like getting the white chalky buildup (calcium) off a faucet or showerhead or getting a rust stain off porcelain it just doesn't do a good job.
Whatever you use, as prevention maybe blow it out real good with compressed air after the final rinse & use a fogging oil like what you'd use for putting an engine in storage? Or just dunk in oil & let the excess drip out
Whatever you use, as prevention maybe blow it out real good with compressed air after the final rinse & use a fogging oil like what you'd use for putting an engine in storage? Or just dunk in oil & let the excess drip out
--------------------------------------
"Sorry but you cannot use search at this time. Please try again in a few minutes"
"This board is currently disabled"
These things make me
"Sorry but you cannot use search at this time. Please try again in a few minutes"
"This board is currently disabled"
These things make me
Re: rust
OXY-CLEAN!!! I'll spare you the commercial parody but, imagine Billy Mazing in your minds...
Seriously, there's no reason why you shouldn't take as good a care of your suppressors as you do your guns. After every shoot, I do the bottle brush routine with break-free, blow out the can, and shoot a little Rem-oil or WD-40 in there. Then they're put back in the box with a silica gel packet. The bottle brush doesn't get everywhere in there but, I figure it can't hurt and, probably helps somewhat.
It may only be a "feel good" measure on my part but, it's cheap insurance and, I've never had rust... Anywhere.
Seriously, there's no reason why you shouldn't take as good a care of your suppressors as you do your guns. After every shoot, I do the bottle brush routine with break-free, blow out the can, and shoot a little Rem-oil or WD-40 in there. Then they're put back in the box with a silica gel packet. The bottle brush doesn't get everywhere in there but, I figure it can't hurt and, probably helps somewhat.
It may only be a "feel good" measure on my part but, it's cheap insurance and, I've never had rust... Anywhere.
________________________________________________________
TACTICAL ARMZ
07-FFL, 02-SOT
www.tacticalarmz.com
TACTICAL ARMZ
07-FFL, 02-SOT
www.tacticalarmz.com
Re: rust
mollinst wrote:OXY-CLEAN!!! I'll spare you the commercial parody but, imagine Billy Mazing in your minds...
Seriously, there's no reason why you shouldn't take as good a care of your suppressors as you do your guns. After every shoot, I do the bottle brush routine with break-free, blow out the can, and shoot a little Rem-oil or WD-40 in there. Then they're put back in the box with a silica gel packet. The bottle brush doesn't get everywhere in there but, I figure it can't hurt and, probably helps somewhat.
It may only be a "feel good" measure on my part but, it's cheap insurance and, I've never had rust... Anywhere.
I clean mine one time a year even if they dont need it
I have two hobbies. Shooting and reloading. The more I do of one the more I can do of the other.
Re: rust
Yeah - every 1000 rnds whether it needs it or not!
________________________________________________________
TACTICAL ARMZ
07-FFL, 02-SOT
www.tacticalarmz.com
TACTICAL ARMZ
07-FFL, 02-SOT
www.tacticalarmz.com
Re: rust
Dang nab it, is this not what Harry Reid says about his personal hygiene?sub-sonic wrote:mollinst wrote:OXY-CLEAN!!! I'll spare you the commercial parody but, imagine Billy Mazing in your minds...
Seriously, there's no reason why you shouldn't take as good a care of your suppressors as you do your guns. After every shoot, I do the bottle brush routine with break-free, blow out the can, and shoot a little Rem-oil or WD-40 in there. Then they're put back in the box with a silica gel packet. The bottle brush doesn't get everywhere in there but, I figure it can't hurt and, probably helps somewhat.
It may only be a "feel good" measure on my part but, it's cheap insurance and, I've never had rust... Anywhere.
I clean mine one time a year even if they dont need it
Speaking about Dingy Harry, heard yesterday that John Boehner who has been continually lambasted on the Senate
floor by Harry "for running the Congress like a dictator", ran across the Ichabod Crane of the Senate
in the White House lobby. Boehner was reported to have walked up to Harry and said "Go F--K yourself".
The shriveled snake was startled and taken aback. Again Boehner said "Go F--K yourself", and then walked away.
Can we hope that Boehner, who controls the Government's purse strings, shows the same testicular fortitude
for future dealings with the DemonRats? Including .....
Re: rust
No Historian, I don't think Harry uses a bottle brush.
________________________________________________________
TACTICAL ARMZ
07-FFL, 02-SOT
www.tacticalarmz.com
TACTICAL ARMZ
07-FFL, 02-SOT
www.tacticalarmz.com
Re: rust
sub-sonic wrote:so I used my sealed 30 cal can on my SKS and used cheap surplus ammo. It was fun. I fired around 300 shots. I put the can in the safe and left it for around 4 months. I get it out today and its totally rusty on the inside.
with out opening it up whats my options if any?
I have it in a bucket of oil now
Just wondering as to the condition of the rifle bore?
I always clean my bore the same day as it is fired, except one time, Few years back I forgot and cleaned my 10/22 5 days after I’d used it.
The barrel bore was PITTED I now use SS barrels when going suppressed.
I have read that ss barrels can rust but haven't experenced that yet.
Re: rust
actually I have only cleaned this one (30cal) twice before and the 5.56 one has been cleaned 2 times in 4 years or 1 time for every 10K (guestimated)mollinst wrote:Yeah - every 1000 rnds whether it needs it or not!
fastfire wrote:sub-sonic wrote:so I used my sealed 30 cal can on my SKS and used cheap surplus ammo. It was fun. I fired around 300 shots. I put the can in the safe and left it for around 4 months. I get it out today and its totally rusty on the inside.
with out opening it up whats my options if any?
I have it in a bucket of oil now
Just wondering as to the condition of the rifle bore?
I always clean my bore the same day as it is fired, except one time, Few years back I forgot and cleaned my 10/22 5 days after I’d used it.
The barrel bore was PITTED I now use SS barrels when going suppressed.
I have read that ss barrels can rust but haven't experenced that yet.
The rifle bore on the SKS is fine.The silencer was stored seperatlly. Yes I did clean the SKS
I am not big on cleaning. I have guns that have not been cleaned since last year. My AR has been used alot and I dont remember when it last got cleaned its got to be 6 months ago and I used it today and it still put in .25" at 100. Cleaning is over rated
I only clean my .22's when they start to malfunction. I would guess that half the guns I own need to be cleaned. Thats because I have not used the others since they were last cleaned
so back to my rust problem. I took it out of the oil and washed it in some degreaser and will take it to work tomorrow and run it in the parts cleaner a few times and see how it looks and then decide on whats the next step.
I have two hobbies. Shooting and reloading. The more I do of one the more I can do of the other.
- Capt. Link.
- Silent But Deadly
- Posts: 2829
- Joined: Wed Oct 17, 2007 9:05 pm
- Location: USA.
Re: rust
If you ship it east I can drop it in the salt bath.
The only reason after 243 years the government now wants to disarm you is they intend to do something you would shoot them for!
http://www.silencertalk.com/forum/viewtopic.php?f=10&t=79895
http://www.silencertalk.com/forum/viewtopic.php?f=10&t=79895
Re: rust
+1!mollinst wrote:No Historian, I don't think Harry uses a bottle brush.
Hey, many of us would gladly pay Rot-O-Rooter to loan him a 'brush' ...
clean out his tonsils at the same time.
Please, Bruce Tinsely, draw this up for us.