K Baffle Vent Jig

Yes, it can be legal to make a silencer. For everything Form-1, from silencer designs that are easily made, to filing forms with the BATF, to 3D modeling. Remember, you must have an approved BATF Form-1 to make a silencer. All NFA laws apply.

Moderators: mpallett, bakerjw

Historian
Silent But Deadly
Posts: 3503
Joined: Mon Mar 29, 2010 10:37 pm

Re: K Baffle Vent Jig

Post by Historian »

I found Enfield's image saved in 2013. Please direct me on how to upload.
Pony express no longer runs by. :)
spu313
New Member
Posts: 6
Joined: Thu Jan 21, 2021 7:03 am

Re: K Baffle Vent Jig

Post by spu313 »

Historian wrote: Fri Feb 05, 2021 8:20 am I found Enfield's image saved in 2013. Please direct me on how to upload.
Generally I've seen it done through imgur, which afaik you do not need an account for.
a_canadian
Silent But Deadly
Posts: 1204
Joined: Fri Oct 11, 2013 3:09 pm

Re: K Baffle Vent Jig

Post by a_canadian »

https://imgbb.com has been very easy to use lately, no problems at all.
Historian
Silent But Deadly
Posts: 3503
Joined: Mon Mar 29, 2010 10:37 pm

Re: K Baffle Vent Jig

Post by Historian »

a_canadian wrote: Fri Feb 05, 2021 2:39 pm https://imgbb.com has been very easy to use lately, no problems at all.
A_K,tried but it was a failed 'goat rope'. I do have 2 images of
Enfield's 2013 postings plus a few others of his lathe
fixture. They are 'sitting at the doc' .

OCD when it came to saving suppressor images over the years
is our version of 'The Cloud'.

Please PM me email address and I shall send.

Hope our friend Enfield is well and successful.
User avatar
Capt. Link.
Silent But Deadly
Posts: 2829
Joined: Wed Oct 17, 2007 9:05 pm
Location: USA.

Re: K Baffle Vent Jig

Post by Capt. Link. »

Historian wrote: Fri Feb 05, 2021 3:56 pm
a_canadian wrote: Fri Feb 05, 2021 2:39 pm https://imgbb.com has been very easy to use lately, no problems at all.
A_K,tried but it was a failed 'goat rope'. I do have 2 images of
Enfield's 2013 postings plus a few others of his lathe
fixture. They are 'sitting at the doc' .

OCD when it came to saving suppressor images over the years
is our version of 'The Cloud'.

Please PM me email address and I shall send.

Hope our friend Enfield is well and successful.
Just wrote "Enfield" and hope to hear from him shortly. I don't remember the jig or see its need if you have his cone holding fixture and a sine bar. K baffles can be held for old school porting @ 45* or the dimple ports used today.
-CL
The only reason after 243 years the government now wants to disarm you is they intend to do something you would shoot them for!
http://www.silencertalk.com/forum/viewtopic.php?f=10&t=79895
mbogo300
Member
Posts: 44
Joined: Thu Aug 01, 2019 3:34 pm

Re: K Baffle Vent Jig

Post by mbogo300 »

12 stamps and looking for one to put in jail. . :mrgreen:
User avatar
Enfield577
Silent But Deadly
Posts: 805
Joined: Mon Mar 28, 2011 6:29 pm
Location: New Zealand

Re: K Baffle Vent Jig

Post by Enfield577 »

Here you go, still struggling to add photos as such but managed to add a link

https://imgur.com/a/Tl2UyuQ
Of all the things I've lost it's my mind I miss the most
Post Reply