Anyone here know of any good sources for Inconel 718 tubing?
Thanks,
Lava
Inconel Tube sources
Inconel Tube sources
"There are no stupid questions, only stupid people". -MAJ MALFUNCTION
- Bendersquint
- Industry Professional
- Posts: 11357
- Joined: Sat Jan 07, 2006 7:19 pm
- Location: North Carolina
- Contact:
Re: Inconel Tube sources
If you can find out please let me know, I have been looking for years.LavaRed wrote:Anyone here know of any good sources for Inconel 718 tubing?
Thanks,
Lava
-
- Silent But Deadly
- Posts: 707
- Joined: Thu Apr 15, 2010 7:20 pm
- Location: The South
Re: Inconel Tube sources
Good luck with that . . . its unobtanium.
Most everyone I know of uses 625.
Most everyone I know of uses 625.
Re: Inconel Tube sources
You keep using that word. I do not think it means what you think it means.
- Bendersquint
- Industry Professional
- Posts: 11357
- Joined: Sat Jan 07, 2006 7:19 pm
- Location: North Carolina
- Contact:
Re: Inconel Tube sources
They told me they ARE available but I would have to buy a minimum of 250lbs of the same spec tubing to even place an order.
I could have done 100 at that time but they wouldn't budge.
Maybe I will try again.
Re: Inconel Tube sources
I managed to get ahold of 2 Inconel 718 bars for baffles. Now I just need tubes so I can make a couple of fully inconel suppressors and so I can just TIG weld everything together.
Yeah, 250lbs of tubing would be rather above my budget.
Yeah, 250lbs of tubing would be rather above my budget.
"There are no stupid questions, only stupid people". -MAJ MALFUNCTION
Re: Inconel Tube sources
Pinky promise, if I find some I'll let you know inmediately.Bendersquint wrote:If you can find out please let me know, I have been looking for years.LavaRed wrote:Anyone here know of any good sources for Inconel 718 tubing?
Thanks,
Lava
"There are no stupid questions, only stupid people". -MAJ MALFUNCTION
- Capt. Link.
- Silent But Deadly
- Posts: 2829
- Joined: Wed Oct 17, 2007 9:05 pm
- Location: USA.
Re: Inconel Tube sources
You may be able to find some pipe at a dairy.That is the metal of choice in that industry.
The only reason after 243 years the government now wants to disarm you is they intend to do something you would shoot them for!
http://www.silencertalk.com/forum/viewtopic.php?f=10&t=79895
http://www.silencertalk.com/forum/viewtopic.php?f=10&t=79895
Re: Inconel Tube sources
LavaRed wrote:I managed to get ahold of 2 Inconel 718 bars for baffles. Now I just need tubes so I can make a couple of fully inconel suppressors and so I can just TIG weld everything together.
Yeah, 250lbs of tubing would be rather above my budget.
One can use 316 or other tubing and weld it with the right filler….
Gunny
Re: Inconel Tube sources
Please, by all means elaborate!gunny50 wrote:LavaRed wrote:I managed to get ahold of 2 Inconel 718 bars for baffles. Now I just need tubes so I can make a couple of fully inconel suppressors and so I can just TIG weld everything together.
Yeah, 250lbs of tubing would be rather above my budget.
One can use 316 or other tubing and weld it with the right filler….
Gunny
"There are no stupid questions, only stupid people". -MAJ MALFUNCTION
Re: Inconel Tube sources
Thanks! I'll definitely follow up that lead.Capt. Link. wrote:You may be able to find some pipe at a dairy.That is the metal of choice in that industry.
And if it's a dairy like the one in your avatar picture, I shall do it ASAP .
"There are no stupid questions, only stupid people". -MAJ MALFUNCTION
-
- Silent But Deadly
- Posts: 707
- Joined: Thu Apr 15, 2010 7:20 pm
- Location: The South
Re: Inconel Tube sources
Why would they use inconel and not 304?Capt. Link. wrote:You may be able to find some pipe at a dairy.That is the metal of choice in that industry.