Wicked wrote:That's really sweet work. Very nice. I like the idea.
What's the muzzle flash like without the can? I'll assume it's not really designed to be shot in that configuration though. Have you tried it at night?
What kind of velocity loss is there with that barrel length?
Part of core after laser welding
close up of locking collar insert as mounted in Silencer.
The weight including the 17/4 inserted connector = 568 / 570 gram
Weight of MB= 145 / 147 gram
Weight of MB with thread protector= 202 - 205 gram
Diameter of silencer at widest point = 47mm
Length of the silencer = 194mm
Length extending the barrel = ca 148 mm
Length extending the MB = ca 111 mm
Weight of silencer including MB = 715 gram
The Special developed blast baffle keeps back pressure low, and the new type end-cap makes sure that flash in rapid fire / controlled FA burst, in this short can is almost non existing and gives a pleasing sound
As mentioned Silencer is rated for 30 cal magnum.
Walls on this silencer are designed to withstand full magnum pressure, as we all know special loads in 308 and 12" barrels will do more than most know.
Safety is high priority as system is designed for special work environments / situations.
Same material specs as my 338LM Silencers that I build just a lot shorter as it for 308 and build to be an overall compact package.
Made 2 designs for this gun system ULTRA compact and compact silencer.
Request was that whole system was super compact, low back pressure, and QD.
Not to intervene with rails - lasers - lights - NV - Thermal sights, to be able to have a silencer sleeve mounted etc etc.
Package delivered with MB, thread protector, SD, Blank Adapter , concussion / blast protector.
Gun is used with can 95% of the time
G28 adapted by me. as a special entry, CQB - Protection team weapon system, barrel 12" on this gun after I shortened them.
This was done on H&K G28 but can be done on all weapon systems, as we do adapt the whole system to be functional and reliable with all ammunition used by users.
Weapon is remarkably compact and accurate with brake and silencer, shoot groups close to 0,5 - 0,75 moa.
Sorry no pictures of inner parts we worked 2 years on developing this new silencer line for MOD and L&E work.
Photo of Locking system will be uploaded tonight.
Flash in daylight is no problem (not visible), at night it is okay, but differs between munition types used.
But as mentioned above it was designed to be used as a system that is shot with can most of the time.
Recoil reduction and jump are fantastically handled.
With this 12" barrel and my brake only so NO can, the user can see impact at 300 meters on target shot from bipod or sandbag. Recoil is straight back and feels like 556.
Will try to make some night pictures in a few weeks when back on range.
Gunny (updated with specs and picture)
