got the form 1 stamped.....
material, i was told the can should be the lightest possible, hence made from aluminum
i listed the can on the paper as 8 inches in length, what should the diameter be?
what baffles? i was told k baffles work well in a 45 cal
how many baffles?, and which baffle material, i am assuming the first should be stainless for durability
this will be mounted on a sig 227, so i will, i assume be needing a piston, i seen that one of my distributors has pistons for sale for the tyrant, it has the proper threads for the sig barrel and is the proper caliber, i could buy one, if there are no legal snafu's, or just make one, they're cheap
Form 1, 45 can questions
Re: Form 1, 45 can questions
the piston is only the inside part of the Nielsen device. gemtec and liberty both sell the full booster but both are 1/2 28 so not good for your 45.
I just went through trying to get a silencerco booster and unless you know someone good luck
I just went through trying to get a silencerco booster and unless you know someone good luck