SDTA DID IT...YHM ADAPTERS FOR FORM 1 Builders

Yes, it can be legal to make a silencer. For everything Form-1, from silencer designs that are easily made, to filing forms with the BATF, to 3D modeling. Remember, you must have an approved BATF Form-1 to make a silencer. All NFA laws apply.

Moderators: mpallett, bakerjw

Post Reply
Capt Beach
New Member
Posts: 7
Joined: Mon Jan 05, 2015 11:29 am

SDTA DID IT...YHM ADAPTERS FOR FORM 1 Builders

Post by Capt Beach » Wed Feb 04, 2015 12:09 pm

SDTA has made and has for sale on there website YHM THREAD ADAPTERS for their D tubes for form one builders...$40...

noisecatcher
Silent Operator
Posts: 71
Joined: Sun Dec 14, 2014 1:11 pm
Location: KS

Re: SDTA DID IT...YHM ADAPTERS FOR FORM 1 Builders

Post by noisecatcher » Wed Feb 04, 2015 7:22 pm

I feel like they are going to make more than this first batch. My guess is they sell out pretty quickly. Having a QD mount on a form 1 used to be only for the guys who had expensive machines and the skill to run them. I know the solvent trap route doesn't get a lot of love because you are basically an assembler that drilled a couple holes. But I think it's a good thing that the form1 community is growing. Every person who has to buy a tax stamp is most likely a person who will vote for people that will work to remove suppressors from the NFA so I say welcome everyone who wants to play by the rules. Who knows maybe one day we'll get as ate up as the more experienced people on here buy some machines develop the skills and make our own epic creations of noise defeating muzzle devices.

Mueller
Member
Posts: 25
Joined: Tue Jan 13, 2015 2:12 pm
Location: Missouri

Re: SDTA DID IT...YHM ADAPTERS FOR FORM 1 Builders

Post by Mueller » Wed Feb 04, 2015 7:53 pm

noisecatcher wrote:Having a QD mount on a form 1 used to be only for the guys who had expensive machines and the skill to run them. I know the solvent trap route doesn't get a lot of love because you are basically an assembler that drilled a couple holes. But I think it's a good thing that the form1 community is growing. Every person who has to buy a tax stamp is most likely a person who will vote for people that will work to remove suppressors from the NFA so I say welcome everyone who wants to play by the rules. Who knows maybe one day we'll get as ate up as the more experienced people on here buy some machines develop the skills and make our own epic creations of noise defeating muzzle devices.

Couldn't agree more. I see both sides of the coin here but like you said,... The more the marrier.

mhidpa
Senior Silent Operator
Posts: 111
Joined: Sat Jan 07, 2006 10:21 am

Re: SDTA DID IT...YHM ADAPTERS FOR FORM 1 Builders

Post by mhidpa » Wed Feb 04, 2015 11:23 pm

As someone who has made a form 1 QD can using the YHM mount, I'd pay $40 for it instead of making another.

noisecatcher
Silent Operator
Posts: 71
Joined: Sun Dec 14, 2014 1:11 pm
Location: KS

Re: SDTA DID IT...YHM ADAPTERS FOR FORM 1 Builders

Post by noisecatcher » Thu Feb 05, 2015 7:37 am

mhidpa wrote:As someone who has made a form 1 QD can using the YHM mount, I'd pay $40 for it instead of making another.
Yeah I was trying to figure this out without a lathe it was going to be difficult. I was going to buy one of their thread protectors get a shoulder cut into it then get whatever I was going to use as a end piece bore a hole in it press in the thread protector, then weld it together. The draw back is I'm stuck using whatever material the thread protector is made of, which could be aluminum and may not have the longevity I want.
Those convinced against their will are of the same opinion still.

User avatar
WhisperFan
Silent But Deadly
Posts: 1550
Joined: Sat Jun 16, 2007 9:08 pm

Re: SDTA DID IT...YHM ADAPTERS FOR FORM 1 Builders

Post by WhisperFan » Thu Feb 05, 2015 8:25 pm

My YHM thread protector is AL ... and I did the Acme threads on my form-1 .... I would have bought one of these, had they been available :D
As nightfall does not come all at once, neither does oppression. In both instances, there is a twilight when everything remains seemingly unchanged. And it is in such a twilight that we all must be aware of change in the air -- however slight -- lest we become unwilling victims of the darkness.
Justice William O. Douglas

Capt Beach
New Member
Posts: 7
Joined: Mon Jan 05, 2015 11:29 am

Re: SDTA DID IT...YHM ADAPTERS FOR FORM 1 Builders

Post by Capt Beach » Fri Feb 06, 2015 11:22 am

The SDTA YHM ADAPTER has been a HUGE success...sold out the initial production run of 90 in just a few days...another run of 100 will be built next week...you can preorder by calling Amy...if enough ask we might get Ti too...

airsix
Member
Posts: 22
Joined: Tue Feb 12, 2013 4:39 pm

Re: SDTA DID IT...YHM ADAPTERS FOR FORM 1 Builders

Post by airsix » Fri Feb 06, 2015 2:14 pm

mhidpa wrote:As someone who has made a form 1 QD can using the YHM mount, I'd pay $40 for it instead of making another.

But.... I acquired a great education in the process of making mine. That's the story I keep telling myself. :lol:

Post Reply