Ready to etch the identifaction and ser# on the tube, questions

fastfire · Post by **fastfire** » Tue Aug 25, 2015 7:08 pm

OK, I'll need to put,

my name
Cal 30
Ser#

Anything I forgot?

I'll post pictures when done.

CMV · Post by **CMV** » Tue Aug 25, 2015 8:03 pm

City & State

fastfire · Post by **fastfire** » Tue Aug 25, 2015 8:34 pm

Thank You!

T-Rex · Post by **T-Rex** » Tue Aug 25, 2015 8:40 pm

Don't forget model#, if it's on the form1.

I do it in this order:
Serial
Model
Caliber
Trust (name)
City, State

YRMV

Post by **mr fixit** » Tue Aug 25, 2015 9:08 pm

T-Rex wrote:Don't forget model#, if it's on the form1.

I do it in this order:
Serial
Model
Caliber
Trust (name)
City, State

YRMV

I do it in the opposite order:

fastfire · Post by **fastfire** » Tue Aug 25, 2015 11:31 pm

mr fixit wrote:
T-Rex wrote:Don't forget model#, if it's on the form1.

I do it in this order:
Serial
Model
Caliber
Trust (name)
City, State

YRMV
I do it in the opposite order:

Decisions Decisions, I'll get it done and post pictures. Still haven't figured out how to post a pictures, not a techy in the least.

T-Rex · Post by **T-Rex** » Wed Aug 26, 2015 6:44 am

fastfire wrote: Decisions Decisions, I'll get it done and post pictures. Still haven't figured out how to post a pictures, not a techy in the least.

Google: "picture hosting"
Sign-up, if necessary.
Click "upload" or similar button
navigate to your picture and upload
your picture should be visible, after upload
there should be links to the image, on the page, you want the direct link

when posting, here, there is a button, above the posting box, marked "Img"
that will insert [img]-[/img] in the box, w/o the "-"
paste the link, provided by the hosting site, in place of the "-"

Always click "preview", to see if you've done it correctly

L1A1Rocker · Post by **L1A1Rocker** » Wed Aug 26, 2015 8:41 am

Also, if you have a "Model" designation on your form, that needs to be on the silencer. I mention this only because my last batch of Form 1s I had ONE kicked back as "needing" a model designation. First and ONLY time that has ever happened. I didn't argue the point, I just filled it in with something. Typical bureaucrat BS!

fastfire · Post by **fastfire** » Wed Aug 26, 2015 12:43 pm

L1A1Rocker wrote:Also, if you have a "Model" designation on your form, that needs to be on the silencer. I mention this only because my last batch of Form 1s I had ONE kicked back as "needing" a model designation. First and ONLY time that has ever happened. I didn't argue the point, I just filled it in with something. Typical bureaucrat BS!

Yep, got a model on the form 1

Thx

Ready to etch the identifaction and ser# on the tube, questions

Ready to etch the identifaction and ser# on the tube, questions

Re: Ready to etch the identifaction and ser# on the tube, questions

Re: Ready to etch the identifaction and ser# on the tube, questions

Re: Ready to etch the identifaction and ser# on the tube, questions

Re: Ready to etch the identifaction and ser# on the tube, questions

Re: Ready to etch the identifaction and ser# on the tube, questions

Re: Ready to etch the identifaction and ser# on the tube, questions

Re: Ready to etch the identifaction and ser# on the tube, questions

Re: Ready to etch the identifaction and ser# on the tube, questions