full titanium 30 cal build in progress.

Yes, it can be legal to make a silencer. For everything Form-1, from silencer designs that are easily made, to filing forms with the BATF, to 3D modeling. Remember, you must have an approved BATF Form-1 to make a silencer. All NFA laws apply.

Moderators: mpallett, bakerjw

User avatar
delta9mda
Silent But Deadly
Posts: 2304
Joined: Wed Dec 07, 2005 2:32 pm
Location: miami, florida

Re: full titanium 30 cal build in progress.

Post by delta9mda »

speak samson, whats the progress
NP
blkgld4me
New Member
Posts: 2
Joined: Mon Dec 01, 2014 7:46 pm

Re: full titanium 30 cal build in progress.

Post by blkgld4me »

Following your build.
Samson1044
Member
Posts: 41
Joined: Tue Jan 05, 2016 6:05 am

Re: full titanium 30 cal build in progress.

Post by Samson1044 »

Been busier than a one legged man in a cat kicking contest. Not sure why but my account was locked out for some reason so I had to create a new one , hence the extra 4.

ANYWAYS , the original end cap was destroyed in a tragic mill accident so I went another route , it came out a 1/2" longer but I was able to add an additional baffle. I cheated and made the rear end cap out of 7068 aluminum and threaded it into the rear of the tube via 32 tpi by 1.7" long and used a liberal amount of Rockset to lock it in place , I was a big hurry only being able to squeeze in limited time to work on it so I didn't get many pictures.
Thereisone
New Member
Posts: 1
Joined: Sat Jan 09, 2016 7:20 am

Re: full titanium 30 cal build in progress.

Post by Thereisone »

Awesome. Following.
Post Reply