80% 60deg Cones

Yes, it can be legal to make a silencer. For everything Form-1, from silencer designs that are easily made, to filing forms with the BATF, to 3D modeling. Remember, you must have an approved BATF Form-1 to make a silencer. All NFA laws apply.

Moderators: mpallett, bakerjw

Post Reply
sizulku
Silent Operator
Posts: 89
Joined: Tue Dec 11, 2012 12:35 pm
Location: Asia

80% 60deg Cones

Post by sizulku » Fri Mar 25, 2016 1:15 am

Gents,

I need 17-4PH material for my next build but the shipping cost of 1.75in(OD) X 12in(L) bar stock from US to my country is very expensive.
I'm thinking to get a workshop to make 80% 60deg Cones baffle (the bore is not drilled) so I can save the shipping cost. Does it legal to do this?

Image
Top
User avatar
doubloon
Silent But Deadly
Posts: 11901
Joined: Thu Jan 01, 2009 1:02 am
Location: Houston-ish

Re: 80% 60deg Cones

Post by doubloon » Fri Mar 25, 2016 6:49 am

This thread has been done several times before, I doubt the answers have changed.

If you don't already have the village idiot on ignore you'll have to skip around the thread for the real content.

viewtopic.php?t=121673
http://www.youtube.com/watch?v=BDtd2jNIwAU MUSAFAR!
http://www.youtube.com/watch?v=8CrOL-ydFMI This is Water DavidW
Complete Form 1s http://www.silencertalk.com/forum/viewtopic.php?f=10&t=79895
Top
Samson1044
Member
Posts: 41
Joined: Tue Jan 05, 2016 8:05 am

Re: 80% 60deg Cones

Post by Samson1044 » Fri Mar 25, 2016 7:02 am

doubloon wrote: If you don't already have the village idiot on ignore you'll have to skip around the thread for the real content.
:lol: :lol: :lol: :lol: :lol: :lol:
Top
Samson1044
Member
Posts: 41
Joined: Tue Jan 05, 2016 8:05 am

Re: 80% 60deg Cones

Post by Samson1044 » Fri Mar 25, 2016 7:04 am

sizulku wrote:Gents,

I need 17-4PH material for my next build but the shipping cost of 1.75in(OD) X 12in(L) bar stock from US to my country is very expensive.
I'm thinking to get a workshop to make 80% 60deg Cones baffle (the bore is not drilled) so I can save the shipping cost. Does it legal to do this?

Image
I guess it kinda depends on the rules where you are , in the US , I can't see it being any different than buying freeze plugs for a mag light "solvent trap". They can't in any way be used for baffels until the bore hole is made
Top
sizulku
Silent Operator
Posts: 89
Joined: Tue Dec 11, 2012 12:35 pm
Location: Asia

Re: 80% 60deg Cones

Post by sizulku » Fri Mar 25, 2016 7:29 am

Doubloon and Samson1044, thank you for your answer, greatly appreciated it.
Top
Grounded
Silent But Deadly
Posts: 228
Joined: Mon Jul 22, 2013 11:44 am
Location: US of A

Re: 80% 60deg Cones

Post by Grounded » Fri Mar 25, 2016 10:10 am

Over $100 of firearms hardware... sent to Asia.... That shop is asking for a nice little visit from the feds. Who really cares about ITAR anyway lol. :roll:
07/02 behind enemy lines
Top
User avatar
JohnnyO
Silent But Deadly
Posts: 163
Joined: Fri Jan 06, 2006 1:05 am

Re: 80% 60deg Cones

Post by JohnnyO » Fri Mar 25, 2016 10:42 am

http://diversifiedmachine.info/custom-order/
Top
sizulku
Silent Operator
Posts: 89
Joined: Tue Dec 11, 2012 12:35 pm
Location: Asia

Re: 80% 60deg Cones

Post by sizulku » Fri Mar 25, 2016 12:05 pm

Grounded wrote:Over $100 of firearms hardware... sent to Asia.... That shop is asking for a nice little visit from the feds. Who really cares about ITAR anyway lol. :roll:
Is there any legal method to do this?
Top
sizulku
Silent Operator
Posts: 89
Joined: Tue Dec 11, 2012 12:35 pm
Location: Asia

Re: 80% 60deg Cones

Post by sizulku » Fri Mar 25, 2016 12:05 pm

Thank you Sir.
Top
Post Reply

Return to “Silencersmithing Forum”