Griffin taper mount dimensions ?

[cdrissel]

I need the dimensions to make a reflex/OTB brake.

Anyone know the diameter/TPI and the geometry of the tapered section ?

[quiettime]

I need the dimensions to make a reflex/OTB brake.

Anyone know the diameter/TPI and the geometry of the tapered section ?

Search this forum, a member has posted what you're looking for in the past

[quiettime]

Went ahead and found it for you. Thanks to propeine
viewtopic.php?t=132136

[cdrissel]

Went ahead and found it for you. Thanks to propeine
viewtopic.php?t=132136

Perfect - thank you !

[propeine]

Shameless plug but this is what I needed those dims for

viewtopic.php?f=10&t=136696

[quiettime]

Shameless plug but this is what I needed those dims for

Did you end up going with 6 degrees?

[propeine]

Shameless plug but this is what I needed those dims for

Did you end up going with 6 degrees?

Yes I did and it locks up so tight I had to red loctite my end cap to keep it from unscrewing

[c5_nc]

Shameless plug but this is what I needed those dims for

Did you end up going with 6 degrees?

Yes I did and it locks up so tight I had to red loctite my end cap to keep it from unscrewing

I would have used rockset vs loctite... but a drop of Fireclean (or veggy oil) on the threads of the brake or adapter the can will stay on firm while shooting but still come off when hot.

[propeine]

Shameless plug but this is what I needed those dims for

Did you end up going with 6 degrees?

Yes I did and it locks up so tight I had to red loctite my end cap to keep it from unscrewing

I would have used rockset vs loctite... but a drop of Fireclean (or veggy oil) on the threads of the brake or adapter the can will stay on firm while shooting but still come off when hot.

Good tip. Thank you. I agree on the rockset too but went with what I had on hand for the time being.