Merry Christmas, Cnc okuma program for a 22 monocore

Yes, it can be legal to make a silencer. For everything Form-1, from silencer designs that are easily made, to filing forms with the BATF, to 3D modeling. Remember, you must have an approved BATF Form-1 to make a silencer. All NFA laws apply.

Moderators: mpallett, bakerjw

Post Reply
zevdogs
Silent But Deadly
Posts: 240
Joined: Thu Jun 02, 2011 8:49 pm

Merry Christmas, Cnc okuma program for a 22 monocore

Post by zevdogs »

https://mega.nz/#!2ZEkSaoJ!gtKGkJg8_PB8 ... iRTs_8iFHE

Finally did a stainless steel 22mono core and I'd like to share my Cnc program I used to make the baffles

Image
fastfire
Silent But Deadly
Posts: 185
Joined: Fri Mar 12, 2010 9:19 pm
Location: I-D-HO

Re: Merry Christmas, Cnc okuma program for a 22 monocore

Post by fastfire »

Male threads? So you have internal threads on your barrel?
zevdogs
Silent But Deadly
Posts: 240
Joined: Thu Jun 02, 2011 8:49 pm

Re: Merry Christmas, Cnc okuma program for a 22 monocore

Post by zevdogs »

fastfire wrote:Male threads? So you have internal threads on your barrel?
No the 3/4 16 threads are only to keep the sleeve in place center of can has 1/2 28 threads
So threads on OD as well as ID just like the silencerco sparrow
Post Reply