YHM qd mount threads
YHM qd mount threads
Does anyone know the thread specs for a YHM qd mount? I could blueprint them but am hoping someone here has already done it.
-
- Silent But Deadly
- Posts: 172
- Joined: Sat Sep 15, 2012 1:04 pm
Re: YHM qd mount threads
i believe it is an ACME 8
should be:
Major dia.= 1.030
Minor dia.= .940
should be:
Major dia.= 1.030
Minor dia.= .940
- Bendersquint
- Industry Professional
- Posts: 11357
- Joined: Sat Jan 07, 2006 7:19 pm
- Location: North Carolina
- Contact:
Re: YHM qd mount threads
My notes match this.vaeevictiss wrote:i believe it is an ACME 8
should be:
Major dia.= 1.030
Minor dia.= .940
Re: YHM qd mount threads
Thanks!
I have never done an ACME thread before. My plan is:
-Turn the Major diameter.
-Grind a HSS bit to the ACME profile
-Feed it in each pass at 14 degrees with the compound until I get to the minor diameter.
-Test fit the mount, if it's too tight, take a little off the sides of the thread unit it fits.
I have never done an ACME thread before. My plan is:
-Turn the Major diameter.
-Grind a HSS bit to the ACME profile
-Feed it in each pass at 14 degrees with the compound until I get to the minor diameter.
-Test fit the mount, if it's too tight, take a little off the sides of the thread unit it fits.