Need help with importing file into fusion 360

Yes, it can be legal to make a silencer. For everything Form-1, from silencer designs that are easily made, to filing forms with the BATF, to 3D modeling. Remember, you must have an approved BATF Form-1 to make a silencer. All NFA laws apply.

Moderators: mpallett, bakerjw

Post Reply
Hannibalbarca
Silent But Deadly
Posts: 239
Joined: Sat Dec 31, 2016 5:38 pm

Need help with importing file into fusion 360

Post by Hannibalbarca »

Can someone here familiar with fusion 360 help me import this file into fusion 360 where i can edit it?
heres the file myhub.autodesk360.com/ue293831f/g/shares/SH7f1edQT22b515c761e17cd103f523f9c51?viewState=NoIgbgDAdAjCA0IDeAdEAXAngBwKZoC40ARXAZwEsBzAOzXjQEMyzd1CmAmXCAdl%2B4BaXIwDGANkEAWABwBOAGaC5MKZJm8FUqXLkATGAGZRENAF8QAXSA
file format is f3z
initializing document manifest xml stream failed document could not load
this is the error i get when i do new design from file.
User avatar
T-Rex
Silent But Deadly
Posts: 1865
Joined: Wed Oct 29, 2014 3:38 pm
Location: CT - The AntiConstitution State

Re: Need help with importing file into fusion 360

Post by T-Rex »

I was able to use the file.
Your process is flawed. Don't try to open new design.
Go to the Data Center (top left button) and Upload the file. It will break it into the separate components and you'll need to save them individually (RMB-Open-Save As). Then, you can build the new design with those saved parts.
Completed Builds www.silencertalk.com/forum/viewtopic.php?t=79895
Burst Calculator www.engineersedge.com/calculators/pipe_bust_calc.htm
Silencer Porn www.instagram.com/explore/tags/silencerporn/
Hannibalbarca
Silent But Deadly
Posts: 239
Joined: Sat Dec 31, 2016 5:38 pm

Re: Need help with importing file into fusion 360

Post by Hannibalbarca »

T-Rex wrote:I was able to use the file.
Your process is flawed. Don't try to open new design.
Go to the Data Center (top left button) and Upload the file. It will break it into the separate components and you'll need to save them individually (RMB-Open-Save As). Then, you can build the new design with those saved parts.
Thanks. I'll go ahead and do that.
Post Reply