Form 1 10/22 barrel

Yes, it can be legal to make a silencer. For everything Form-1, from silencer designs that are easily made, to filing forms with the BATF, to 3D modeling. Remember, you must have an approved BATF Form-1 to make a silencer. All NFA laws apply.

Moderators: mpallett, bakerjw

Post Reply
Vcole4
New Member
Posts: 1
Joined: Mon Mar 12, 2018 1:08 pm

Form 1 10/22 barrel

Post by Vcole4 »

I'm wanting to form 1 an integral 22 barrel. I've seen a guy who did it legally but unsure of what to do exactly. Disclaimer: I will not be doing anything illegal or before I have a form 1. He said he drilled a series of holes just past the reciever then made a small metal box packed with steel wool and attached it to the barrel then dremeled out the stock so.the box would fit in it and the factory stock could go back on. It was super quiet and I would like to do it. Does anyone have any information on what to do and legally. Thanks
User avatar
doubloon
Silent But Deadly
Posts: 11897
Joined: Wed Dec 31, 2008 11:02 pm
Location: Houston-ish

Re: Form 1 10/22 barrel

Post by doubloon »

IIRC packing material is considered a silencer 'part' and cannot legally be replaced be a non-licensee. If I'm not remembering correctly someone may be along to correct me with a link to actual facts.

There's a link to the form 1 build thread in my signature, start at the top and drift through the pages, I believe you'll find a couple-few integrals in there somewhere.
http://www.youtube.com/watch?v=BDtd2jNIwAU MUSAFAR!
http://www.youtube.com/watch?v=8CrOL-ydFMI This is Water DavidW
Complete Form 1s http://www.silencertalk.com/forum/viewtopic.php?f=10&t=79895
User avatar
fishman
Silent But Deadly
Posts: 1444
Joined: Sun Dec 20, 2015 7:15 pm

Re: Form 1 10/22 barrel

Post by fishman »

Packing doesn't count as a wipe?

Don't commonly found, unmodified, items not count as silencer parts (ie the threaded rods of different lengths in the salvo 12)?
300 blackout form 1: http://www.silencertalk.com/forum/viewtopic.php?f=10&t=137293

5.56 form 1:
http://www.silencertalk.com/forum/viewtopic.php?f=10&t=141800&p=955647#p955647
User avatar
doubloon
Silent But Deadly
Posts: 11897
Joined: Wed Dec 31, 2008 11:02 pm
Location: Houston-ish

Re: Form 1 10/22 barrel

Post by doubloon »

I could be remembering wrong, thought I read it somewhere a long time ago related to chore boys.

Quick search found it.

Could be BS, I think the link to the letter is broken.

http://www.thetruthaboutguns.com/2011/1 ... n-illegal/

An old ST thread on the topic.

viewtopic.php?t=79257

There was a bunch of noise about wipes for some silencers being parts as well, I don't remember if it was Dead Air only. Dead Air provided a list of authorized replacement stations.

https://deadairsilencers.com/resources/wipereplacement/

https://www.youtube.com/watch?v=K7KCdNy1mmQ

I still don't fully understand the case for leftover parts like some modular silencers.
http://www.youtube.com/watch?v=BDtd2jNIwAU MUSAFAR!
http://www.youtube.com/watch?v=8CrOL-ydFMI This is Water DavidW
Complete Form 1s http://www.silencertalk.com/forum/viewtopic.php?f=10&t=79895
Post Reply