I am currently deigning a 5.56 muzzle brake/qd monocore can combo for an sot partner of mine, and i have a simple question. The can will be located at the front of muzzle brake simply by a ring inside core the same diameter as muzzle brake, leaving a chamber around muzzle brake, and i was curious whether or not to isolate chamber around mb from the blast chamber with the locating ring at front, or should I interrupt the seal there to allow gasses to escape other than through boreline?
Thoughts? Reasons?
Thanks
Simple question on muzzle brake mount
-
- New Member
- Posts: 8
- Joined: Sun Jul 01, 2018 3:01 pm
- T-Rex
- Silent But Deadly
- Posts: 1865
- Joined: Wed Oct 29, 2014 3:38 pm
- Location: CT - The AntiConstitution State
Re: Simple question on muzzle brake mount
From my experience, a suppressor will always benefit from as much gas delay as your design can provide
Completed Builds www.silencertalk.com/forum/viewtopic.php?t=79895
Burst Calculator www.engineersedge.com/calculators/pipe_bust_calc.htm
Silencer Porn www.instagram.com/explore/tags/silencerporn/
Burst Calculator www.engineersedge.com/calculators/pipe_bust_calc.htm
Silencer Porn www.instagram.com/explore/tags/silencerporn/
-
- New Member
- Posts: 8
- Joined: Sun Jul 01, 2018 3:01 pm
Re: Simple question on muzzle brake mount
Kinda figured that much out already.T-Rex wrote:From my experience, a suppressor will always benefit from as much gas delay as your design can provide
I guess i was asking whether a small thick walled chamber around mb would delay gas more or less than if i were to open up the id a little more and vent it as much as possible to the blast chamber, effectively adding volume, safety factor is not going to be an issue either way, but sound, and also longevity of blast baffle will certainly carry weight, burning up sacrificial baffles in the muzzle brake is fine if it will decrease burbing of blast baffle.
-
- New Member
- Posts: 8
- Joined: Sun Jul 01, 2018 3:01 pm
Re: Simple question on muzzle brake mount
Sorry im not outlying whole project to make it more clear still finalozong drawings for patent, but want to include mounting sytem in the provisional and i couldnt really find much info on utilizing the muzzle brake inside to the best of its ability