Welding the pin

Yes, it can be legal to make a silencer. For everything Form-1, from silencer designs that are easily made, to filing forms with the BATF, to 3D modeling. Remember, you must have an approved BATF Form-1 to make a silencer. All NFA laws apply.

Moderators: mpallett, bakerjw

Post Reply
Siskiyous
New Member
Posts: 8
Joined: Sat Nov 21, 2015 1:49 am

Welding the pin

Post by Siskiyous » Fri Aug 02, 2019 3:58 am

If I extend a short barrel using the welded pin method, can I run the pin through a larger sacrificial collar. So from outer to inner would be color, extension, barrel = with a hole all the way through the first 2 and partially into the barrel, and the tack weld on the collar at the pin. Thus, if it needed changing at some time I could just grind off the weld and not damage the extension?

I have some T/G barrels that I would like to use in Carbine form.

User avatar
fishman
Silent But Deadly
Posts: 1398
Joined: Sun Dec 20, 2015 9:15 pm

Re: Welding the pin

Post by fishman » Mon Aug 05, 2019 7:09 am

I dont see why not
300 blackout form 1: http://www.silencertalk.com/forum/viewtopic.php?f=10&t=137293

5.56 form 1:
http://www.silencertalk.com/forum/viewtopic.php?f=10&t=141800&p=955647#p955647

Siskiyous
New Member
Posts: 8
Joined: Sat Nov 21, 2015 1:49 am

Re: Welding the pin

Post by Siskiyous » Tue Aug 20, 2019 5:04 am

Thank you

Post Reply