Welding the pin
Posted: Fri Aug 02, 2019 2:58 am
If I extend a short barrel using the welded pin method, can I run the pin through a larger sacrificial collar. So from outer to inner would be color, extension, barrel = with a hole all the way through the first 2 and partially into the barrel, and the tack weld on the collar at the pin. Thus, if it needed changing at some time I could just grind off the weld and not damage the extension?
I have some T/G barrels that I would like to use in Carbine form.
I have some T/G barrels that I would like to use in Carbine form.