1.625 Tubes

Yes, it can be legal to make a silencer. For everything Form-1, from silencer designs that are easily made, to filing forms with the BATF, to 3D modeling. Remember, you must have an approved BATF Form-1 to make a silencer. All NFA laws apply.

Moderators: mpallett, bakerjw

Post Reply
EastTxHorn
New Member
Posts: 6
Joined: Fri Nov 01, 2019 1:12 pm

1.625 Tubes

Post by EastTxHorn » Wed Jan 01, 2020 1:24 pm

I'm looking for some 1.625 OD, 1.5 ID tubes. I've looked at every place I know of. All backordered. Does anyone have the ability to thread a couple or have a source for 9.5"?

#40Fan
Silent But Deadly
Posts: 202
Joined: Tue Nov 20, 2018 6:41 pm

Re: 1.625 Tubes

Post by #40Fan » Thu Jan 02, 2020 3:19 pm

HawkTactical on the Form 1 board.

Dunkman
Member
Posts: 28
Joined: Tue Dec 03, 2019 10:38 pm

Re: 1.625 Tubes

Post by Dunkman » Thu Jan 02, 2020 4:31 pm

Is that Hawk Innovative Tech? This is the only forum I am on other than reddit.

EastTxHorn
New Member
Posts: 6
Joined: Fri Nov 01, 2019 1:12 pm

Re: 1.625 Tubes

Post by EastTxHorn » Fri Jan 03, 2020 9:50 am

I don't see a Hawk Tactical on any of the boards that sells parts?

#40Fan
Silent But Deadly
Posts: 202
Joined: Tue Nov 20, 2018 6:41 pm

Re: 1.625 Tubes

Post by #40Fan » Sun Jan 05, 2020 9:30 pm

Sorry, I goofed that up.

Hawkstand

http://form1suppressor.boards.net/threa ... ew-website

http://spectrum-inc.com/

Contact him through the site and let him know what you are looking for. He supplies tubes for SPC.

EastTxHorn
New Member
Posts: 6
Joined: Fri Nov 01, 2019 1:12 pm

Re: 1.625 Tubes

Post by EastTxHorn » Wed Jan 08, 2020 12:49 pm

No luck there either. Seems everyone is out at the moment? Anyone else have any ideas?

Dunkman
Member
Posts: 28
Joined: Tue Dec 03, 2019 10:38 pm

Re: 1.625 Tubes

Post by Dunkman » Wed Jan 08, 2020 4:55 pm

Maybe https://www.titaniumjoe.com/ has what you need? I've never used them. Do you need them threaded or do you plan to do them yourself?

EastTxHorn
New Member
Posts: 6
Joined: Fri Nov 01, 2019 1:12 pm

Re: 1.625 Tubes

Post by EastTxHorn » Thu Jan 09, 2020 12:38 am

I need them threaded. I've never threaded tubes. Is it difficult?

Dunkman
Member
Posts: 28
Joined: Tue Dec 03, 2019 10:38 pm

Re: 1.625 Tubes

Post by Dunkman » Thu Jan 09, 2020 10:21 am

At the bottom of their page it says they now offer machine shop services, but like I said I've never used them before.

User avatar
fishman
Silent But Deadly
Posts: 1444
Joined: Sun Dec 20, 2015 9:15 pm

Re: 1.625 Tubes

Post by fishman » Thu Jan 09, 2020 12:27 pm

EastTxHorn wrote:
Thu Jan 09, 2020 12:38 am
I need them threaded. I've never threaded tubes. Is it difficult?
Do you have a lathe? It's not hard
300 blackout form 1: http://www.silencertalk.com/forum/viewtopic.php?f=10&t=137293

5.56 form 1:
http://www.silencertalk.com/forum/viewtopic.php?f=10&t=141800&p=955647#p955647

Post Reply