Qb 22 kit with mouse holes
Qb 22 kit with mouse holes
I was curious to see if anyone had tried mouse holes in some or all of the k baffles in this kit. If so, which configurations work best.
- T-Rex
- Silent But Deadly
- Posts: 1865
- Joined: Wed Oct 29, 2014 3:38 pm
- Location: CT - The AntiConstitution State
Re: Qb 22 kit with mouse holes
mouseholes are ancient tech and not req'd.
Completed Builds www.silencertalk.com/forum/viewtopic.php?t=79895
Burst Calculator www.engineersedge.com/calculators/pipe_bust_calc.htm
Silencer Porn www.instagram.com/explore/tags/silencerporn/
Burst Calculator www.engineersedge.com/calculators/pipe_bust_calc.htm
Silencer Porn www.instagram.com/explore/tags/silencerporn/
Re: Qb 22 kit with mouse holes
I just over bore the first baffels.
For example my 22lr and wmr form 1 solvent trap the solvent trap maker called for a 9/32 drill bit if you want to turn it into a silencer. So I drilled out the first 2 cones with 5/16.
I read elsewhere that if you drilled all the cones on a solvent trap like mine with 9/32 you will get baffel or end cap strikes unless you over bore or notch the 9/32 hole.
I shot about 10 22mag from a rifle and 50 22lr from a 4 inch pistol and no baffel or end cap strikes so far.
For example my 22lr and wmr form 1 solvent trap the solvent trap maker called for a 9/32 drill bit if you want to turn it into a silencer. So I drilled out the first 2 cones with 5/16.
I read elsewhere that if you drilled all the cones on a solvent trap like mine with 9/32 you will get baffel or end cap strikes unless you over bore or notch the 9/32 hole.
I shot about 10 22mag from a rifle and 50 22lr from a 4 inch pistol and no baffel or end cap strikes so far.
So much has changed since my last form 1