Qb 22 kit with mouse holes

Yes, it can be legal to make a silencer. For everything Form-1, from silencer designs that are easily made, to filing forms with the BATF, to 3D modeling. Remember, you must have an approved BATF Form-1 to make a silencer. All NFA laws apply.

Moderators: mpallett, bakerjw

Post Reply
New Member
Posts: 1
Joined: Wed Jul 15, 2020 10:59 pm

Qb 22 kit with mouse holes

Post by Ptm82379 » Thu Jul 16, 2020 12:03 am

I was curious to see if anyone had tried mouse holes in some or all of the k baffles in this kit. If so, which configurations work best.

User avatar
Silent But Deadly
Posts: 1864
Joined: Wed Oct 29, 2014 4:38 pm
Location: CT - The AntiConstitution State

Re: Qb 22 kit with mouse holes

Post by T-Rex » Thu Jul 16, 2020 9:48 am

mouseholes are ancient tech and not req'd.
Completed Builds www.silencertalk.com/forum/viewtopic.php?t=79895
Burst Calculator www.engineersedge.com/calculators/pipe_bust_calc.htm
Silencer Porn www.instagram.com/explore/tags/silencerporn/

Senior Silent Operator
Posts: 130
Joined: Mon Aug 06, 2007 11:58 pm
Location: Anythinggoes, NM

Re: Qb 22 kit with mouse holes

Post by 748 » Thu Jul 16, 2020 7:51 pm

I just over bore the first baffels.
For example my 22lr and wmr form 1 solvent trap the solvent trap maker called for a 9/32 drill bit if you want to turn it into a silencer. So I drilled out the first 2 cones with 5/16.
I read elsewhere that if you drilled all the cones on a solvent trap like mine with 9/32 you will get baffel or end cap strikes unless you over bore or notch the 9/32 hole.
I shot about 10 22mag from a rifle and 50 22lr from a 4 inch pistol and no baffel or end cap strikes so far.
So much has changed since my last form 1

Post Reply