how does this monocore look?

dammitman · Post by **dammitman** » Tue Apr 19, 2011 8:20 am

[img]http://airgunartisans.com/images/Paris%[/img]

Bendersquint · Post by **Bendersquint** » Tue Apr 19, 2011 8:27 am

dammitman wrote:[img]http://airgunartisans.com/images/Paris%[/img]

Like a pile of crap. Shiny but a god awful stench.

This will do little if anything for suppression.

You would be better off with washers and spacers!

-B

dammitman · Post by **dammitman** » Tue Apr 19, 2011 9:13 am

really? i was looking for somewhat simple monocore designs and that one looked pretty simple. what would make it so bad? any photos of better ones?

ghostdog662 · Post by **ghostdog662** » Tue Apr 19, 2011 9:43 am

The shape of it does little to encourage the air to get trapped / expand into a wall.

57fairlane · Post by **57fairlane** » Tue Apr 19, 2011 10:04 am

dammitman wrote:really? i was looking for somewhat simple monocore designs and that one looked pretty simple. what would make it so bad? any photos of better ones?

It is simple . . . and on a .22 would probably be "hearing safe" although I can't imagine it being that great.

If you go on what gas does leaving a hole you'll understand why flat washers dont work as well as conical shaped ones.

You have to direct the gas and prevent it from leaving the chamber easily.

oykas · Post by **oykas** » Mon May 02, 2011 1:55 pm

Hello ...

new guy here but not in airguns .I was told that there was a negative talk here about ParisD silencer , from guys that have not tried one .
Ok it looks shiny and well made, and what you see is what i got, BUT i have to tell you guys that thing is awesome and works a lot better than the other silencers i have on my other rifles, including my HW100. Paris told me that the noise level could of been a even lower if i owned a .25cal, which unfortunately i do not. All my airguns are 1.77 and .22cal...but i am not complaining because like i told you it works better than all the others that i have purchased
Paris told me that another customer of his got one for his rim fire weapon and was so impressed by it he wanted another but for his 9mm powder burner, so he had to enlarge the bore of it.

Many many guys have bought this silencer but not many come out to say how good it is because they are worried about legalities, if you know what i mean. I am not because in Germany they are legal on airguns

From what i see in airguns forum in the US you pay a lot of money for tubes with washers, why not try this one for a lot less. if you do not like it sell it.

Do not ask me how silencers work because i have no idea. All i can tell you is that the finish is tops and so is the effectiveness

The carbon fiber look is just a stick on which i got form a car accessory shop, it protects the gun from scratches as well.

doubloon · Post by **doubloon** » Mon May 02, 2011 2:01 pm

oykas wrote:... I was told that there was a negative talk here about ParisD silencer ...

How does it sound on a Ruger 10/22?

Do you have any meter results for it?

oykas · Post by **oykas** » Mon May 02, 2011 3:10 pm

doubloon wrote:
oykas wrote:... I was told that there was a negative talk here about ParisD silencer ...
How does it sound on a Ruger 10/22?

Do you have any meter results for it?

sorry my friend i do not have a meter, but it does a great job on the ruger. I do not have one but my friend has one and wanted to test it out to see how good it is so he will get one.
Well he ordered one and he is waiting for delivery

57fairlane · Post by **57fairlane** » Mon May 02, 2011 5:40 pm

oykas wrote:i have to tell you guys that thing is awesome and works a lot better than the other silencers i have on my other rifles

Shoot it next to an Element or Sparrow and let us know how that turns out for you.

Just by looking at the blast chamber it should have a loud FRP . . . the only saving grace of this design is the pure amount of volume you have by using a 8" long silencer.

oykas · Post by **oykas** » Tue May 03, 2011 7:56 am

57fairlane wrote:
oykas wrote:i have to tell you guys that thing is awesome and works a lot better than the other silencers i have on my other rifles
Shoot it next to an Element or Sparrow and let us know how that turns out for you.

Just by looking at the blast chamber it should have a loud FRP . . . the only saving grace of this design is the pure amount of volume you have by using a 8" long silencer.

you haven't got one but you seem to have all the answers

doubloon · Post by **doubloon** » Tue May 03, 2011 8:24 am

I still can't see the pic from the original post, is this the one everybody is looking at?

http://www.youtube.com/watch?v=1yzws1gRdm0

goteron · Post by **goteron** » Tue May 03, 2011 8:30 am

Very nice machining, way to much material and not enough volume. How does the tube secure to the core, I dont see threads? NM, I see set screws at the back.

I would say it does not perform well if I were to take a guess.

dammitman · Post by **dammitman** » Tue May 03, 2011 4:17 pm

i gave up on that design after all the responces were negative. what i really thought was interesting was that it could be purchaced here for a air gun but it really looks like a usable silencer for a 22 rifle. it just seems not legal to sell here in the US without the stamp, but it is. wierd.

jimmym40a2 · Post by **jimmym40a2** » Tue May 03, 2011 5:26 pm

There is a big difference in silencing an air gun and a rifle.That design is not good for a rifle that used gun powder.

57fairlane · Post by **57fairlane** » Tue May 03, 2011 7:35 pm

oykas wrote:you haven't got one but you seem to have all the answers

Wish I did . . .

I've shot enough .22 silencers and made some that worked well enough to have a slight idea on what works and what won't.

I just know that in one particular case I lengthened the blast chamber a half inch or so and it got louder

oykas · Post by **oykas** » Wed May 04, 2011 9:07 am

doubloon wrote:I still can't see the pic from the original post, is this the one everybody is looking at?

http://www.youtube.com/watch?v=1yzws1gRdm0

yes that is the silencer we are talking about

how does this monocore look?

how does this monocore look?

Re: how does this monocore look?

Re: how does this monocore look?

Re: how does this monocore look?

Re: how does this monocore look?

Re: how does this monocore look?

Re: how does this monocore look?

Re: how does this monocore look?

Re: how does this monocore look?

Re: how does this monocore look?

Re: how does this monocore look?

Re: how does this monocore look?

Re: how does this monocore look?

Re: how does this monocore look?

Re: how does this monocore look?

Re: how does this monocore look?