Suppressor Baffle Pics ONLY!

Yes, it can be legal to make a silencer. For everything Form-1, from silencer designs that are easily made, to filing forms with the BATF, to 3D modeling. Remember, you must have an approved BATF Form-1 to make a silencer. All NFA laws apply.

Moderators: mpallett, bakerjw

User avatar
Richard/SIA
Silent But Deadly
Posts: 368
Joined: Tue Nov 25, 2008 3:51 am
Location: Nevada

My step-cone 9mm baffles.

Post by Richard/SIA »

I put these up on another thread and was asked to post them here.

Here is my latest 9mm stepped cone baffle, used in an AR 9mm integral design.
Works very well, well enough that I have to be a bit possessive about it, and want to meter it.
I am not divulging exactly what I do in the ported expansion chamber area.
No fancy ports (Yet?) as I do not have a sound meter to determine if they would actually help or not.
I like simplicity, which this achieves.

Hoping it will also work well with 300 BLK.

I found that to be effective the "Steps" have to be reasonably wide, which limits their number.
I also concluded they work better with a slight compound angle and sharp edge.
The deep steps force the overall angle to 45º, 60º leaves the steps too shallow.
Using a 60º cone on the muzzle side, this leaves enough material for some other experiments.

In examining baffles after firing I note that the powder residue is very evenly distributed.
Other baffles such as simple M's have tended to remain almost clean near the orifice, with heavier deposits around the outside.

Hard anodized for durability and easy cleaning, I clean my baffles frequently in an effort to preserve them.

Image
At these prices I want my gas 100 octane, leaded, and my windshield washed!
User avatar
emil
Member
Posts: 30
Joined: Tue Oct 02, 2007 7:37 am

Re: Suppressor Baffle Pics ONLY!

Post by emil »

Guys

I found this picture on the internet.

Image

Do you know what this suppressor is ? I think it's AAC M4-2000 and AAC 762-SD
User avatar
Bendersquint
Industry Professional
Posts: 11357
Joined: Sat Jan 07, 2006 7:19 pm
Location: North Carolina
Contact:

Re: Suppressor Baffle Pics ONLY!

Post by Bendersquint »

emil wrote:Guys

I found this picture on the internet.

Do you know what this suppressor is ? I think it's AAC M4-2000 and AAC 762-SD
Fixed the picture for you....

Image

That is a AAC 416-SD and an AAC 762SD.

-B
User avatar
delta9mda
Silent But Deadly
Posts: 2304
Joined: Wed Dec 07, 2005 2:32 pm
Location: miami, florida

Re: Suppressor Baffle Pics ONLY!

Post by delta9mda »

darn it, i made a boo-boo and will admit it. was looking at that scar and noticed the raised areas where the baffles are in the tube.

let me know if it needs to be removed.

nice catch B
NP
User avatar
emil
Member
Posts: 30
Joined: Tue Oct 02, 2007 7:37 am

Re: Suppressor Baffle Pics ONLY!

Post by emil »

another one

Image

on the website where i found this picture was written that it was: "AWC - one of the last design patented by Charles "Mykey" Finn"

do you know what this suppressor is ?
iron.maiden
Silent But Deadly
Posts: 240
Joined: Fri Dec 18, 2009 1:07 pm

Re: Suppressor Baffle Pics ONLY!

Post by iron.maiden »

40 monocore
Image
User avatar
winsor
Silent But Deadly
Posts: 363
Joined: Fri Nov 20, 2009 1:11 am
Location: Mars

Re: Suppressor Baffle Pics ONLY!

Post by winsor »

Image

Is it M4?
░░ in search ☼f the silence ░░ ִ ִ ִ ִ ִ ִ ִ ִ ִ n☼ hunting , n☼ killing , just plinking ☼ ☼☼
User avatar
winsor
Silent But Deadly
Posts: 363
Joined: Fri Nov 20, 2009 1:11 am
Location: Mars

Re: Suppressor Baffle Pics ONLY!

Post by winsor »

Head down products - HD22 with 6AL4V Titanium blast baffle.
1"odx5.3"long
Image

ImageImage
░░ in search ☼f the silence ░░ ִ ִ ִ ִ ִ ִ ִ ִ ִ n☼ hunting , n☼ killing , just plinking ☼ ☼☼
User avatar
winsor
Silent But Deadly
Posts: 363
Joined: Fri Nov 20, 2009 1:11 am
Location: Mars

Re: Suppressor Baffle Pics ONLY!

Post by winsor »

:mrgreen:

Another next step on the journey.
Image
░░ in search ☼f the silence ░░ ִ ִ ִ ִ ִ ִ ִ ִ ִ n☼ hunting , n☼ killing , just plinking ☼ ☼☼
User avatar
winsor
Silent But Deadly
Posts: 363
Joined: Fri Nov 20, 2009 1:11 am
Location: Mars

Re: Suppressor Baffle Pics ONLY!

Post by winsor »

Image
░░ in search ☼f the silence ░░ ִ ִ ִ ִ ִ ִ ִ ִ ִ n☼ hunting , n☼ killing , just plinking ☼ ☼☼
User avatar
winsor
Silent But Deadly
Posts: 363
Joined: Fri Nov 20, 2009 1:11 am
Location: Mars

Re: Suppressor Baffle Pics ONLY!

Post by winsor »

Some are good. Do you want to hire me as your designer?

Here's a brand new.
Image

late one.
░░ in search ☼f the silence ░░ ִ ִ ִ ִ ִ ִ ִ ִ ִ n☼ hunting , n☼ killing , just plinking ☼ ☼☼
User avatar
winsor
Silent But Deadly
Posts: 363
Joined: Fri Nov 20, 2009 1:11 am
Location: Mars

Re: Suppressor Baffle Pics ONLY!

Post by winsor »

Image

Is this the Isis 9 ?
░░ in search ☼f the silence ░░ ִ ִ ִ ִ ִ ִ ִ ִ ִ n☼ hunting , n☼ killing , just plinking ☼ ☼☼
User avatar
winsor
Silent But Deadly
Posts: 363
Joined: Fri Nov 20, 2009 1:11 am
Location: Mars

Re: Suppressor Baffle Pics ONLY!

Post by winsor »

Image

Tactical Innovations Stratus 22lr.
Diameter: 1.0″
Length: 5.01″
░░ in search ☼f the silence ░░ ִ ִ ִ ִ ִ ִ ִ ִ ִ n☼ hunting , n☼ killing , just plinking ☼ ☼☼
User avatar
winsor
Silent But Deadly
Posts: 363
Joined: Fri Nov 20, 2009 1:11 am
Location: Mars

Re: Suppressor Baffle Pics ONLY!

Post by winsor »

Image

XTAR-9 baffle.
░░ in search ☼f the silence ░░ ִ ִ ִ ִ ִ ִ ִ ִ ִ n☼ hunting , n☼ killing , just plinking ☼ ☼☼
User avatar
winsor
Silent But Deadly
Posts: 363
Joined: Fri Nov 20, 2009 1:11 am
Location: Mars

Re: Suppressor Baffle Pics ONLY!

Post by winsor »

.
.
Warlock II

Image

Image
░░ in search ☼f the silence ░░ ִ ִ ִ ִ ִ ִ ִ ִ ִ n☼ hunting , n☼ killing , just plinking ☼ ☼☼
User avatar
winsor
Silent But Deadly
Posts: 363
Joined: Fri Nov 20, 2009 1:11 am
Location: Mars

Re: Suppressor Baffle Pics ONLY!

Post by winsor »

.
.

Spectre II

Image

Image

Image
░░ in search ☼f the silence ░░ ִ ִ ִ ִ ִ ִ ִ ִ ִ n☼ hunting , n☼ killing , just plinking ☼ ☼☼
User avatar
winsor
Silent But Deadly
Posts: 363
Joined: Fri Nov 20, 2009 1:11 am
Location: Mars

Re: Suppressor Baffle Pics ONLY!

Post by winsor »

.
.
new Octane9
1.375"x7.7" can

Image

Image
░░ in search ☼f the silence ░░ ִ ִ ִ ִ ִ ִ ִ ִ ִ n☼ hunting , n☼ killing , just plinking ☼ ☼☼
User avatar
PaulNoiseLess
Silent But Deadly
Posts: 1249
Joined: Sun Dec 06, 2009 10:02 am
Location: Australia
Contact:

Re: Suppressor Baffle Pics ONLY!

Post by PaulNoiseLess »

Hi,

A beautiful Form-1 MonoCore (.22 Hornet, 1.25x6.5).

Best,

Paul

Image
The future is not waiting for us, it is waiting within us ...
User avatar
jreinke
Silent But Deadly
Posts: 1226
Joined: Fri Jan 26, 2007 10:32 pm
Location: WI, USA
Contact:

Re: Suppressor Baffle Pics ONLY!

Post by jreinke »

emil wrote:another one

Image

on the website where i found this picture was written that it was: "AWC - one of the last design patented by Charles "Mykey" Finn"

do you know what this suppressor is ?
Finn has only 3 patents to his name: 4,384,507; 4,588,043 & 4,590,698. The middle one is the only one that shows baffles and is the one that patented the 'M' and 'K' baffles.
[url=http://militarysignatures.com][img]http://militarysignatures.com/signatures/member1236.png[/img][/url]
User avatar
delta9mda
Silent But Deadly
Posts: 2304
Joined: Wed Dec 07, 2005 2:32 pm
Location: miami, florida

Re: Supressor Baffle Pics!

Post by delta9mda »

emil wrote:Guys, is this cut of Thundertap ?

Image
no this is the H&K licensed finn baffles in a 9mm subgun can)
NP
User avatar
emil
Member
Posts: 30
Joined: Tue Oct 02, 2007 7:37 am

Re: Suppressor Baffle Pics ONLY!

Post by emil »

This is SRT Conamche

Image


Image

Image

P.S. I need your help. It's been a long time since I look for Cobray M11/9 hammer dimension on the internet but I can't find anything interesting. Does anybody have blueprint with dimension or use this gun and could share that info?


Image
ChielScape
New Member
Posts: 2
Joined: Mon Feb 06, 2012 6:56 am

Re: Suppressor Baffle Pics ONLY!

Post by ChielScape »

Hey guys, I was wondering what these asymmetrical cutouts actually do, because it's kinda bothering me and my symmetry-OCD :lol:

Image
zevdogs
Silent But Deadly
Posts: 240
Joined: Thu Jun 02, 2011 8:49 pm

Re: Suppressor Baffle Pics ONLY!

Post by zevdogs »

chili17 wrote:
ChielScape wrote:Hey guys, I was wondering what these asymmetrical cutouts actually do, because it's kinda bothering me and my symmetry-OCD :lol:

Image
they direct the gas
Look at the ones I've done after they wear shot and you can see the burn patterns

Image

Image

Brand new and un shot

Image
Image
Image
ChielScape
New Member
Posts: 2
Joined: Mon Feb 06, 2012 6:56 am

Re: Suppressor Baffle Pics ONLY!

Post by ChielScape »

Thanks guys
User avatar
twodollarbill
Silent But Deadly
Posts: 420
Joined: Wed May 30, 2007 5:25 pm
Location: wisconsin

Re: Suppressor Baffle Pics ONLY!

Post by twodollarbill »

zevdogs wrote: Look at the ones I've done after they wear shot and you can see the burn patterns

Image

Here is a pic I posted before.....after firing a few 22lr rounds when baffles are each rotated 180 degrees.
Evident by the residue, the blast strongly follows the cut of the mouse hole.
Image
Post Reply