Suppressor Baffle Pics ONLY!

Yes, it can be legal to make a silencer. For everything Form-1, from silencer designs that are easily made, to filing forms with the BATF, to 3D modeling. Remember, you must have an approved BATF Form-1 to make a silencer. All NFA laws apply.

Moderators: mpallett, bakerjw

User avatar
Richard/SIA
Silent But Deadly
Posts: 368
Joined: Tue Nov 25, 2008 5:51 am
Location: Nevada

My step-cone 9mm baffles.

Post by Richard/SIA » Mon Nov 14, 2011 12:41 am

I put these up on another thread and was asked to post them here.

Here is my latest 9mm stepped cone baffle, used in an AR 9mm integral design.
Works very well, well enough that I have to be a bit possessive about it, and want to meter it.
I am not divulging exactly what I do in the ported expansion chamber area.
No fancy ports (Yet?) as I do not have a sound meter to determine if they would actually help or not.
I like simplicity, which this achieves.

Hoping it will also work well with 300 BLK.

I found that to be effective the "Steps" have to be reasonably wide, which limits their number.
I also concluded they work better with a slight compound angle and sharp edge.
The deep steps force the overall angle to 45º, 60º leaves the steps too shallow.
Using a 60º cone on the muzzle side, this leaves enough material for some other experiments.

In examining baffles after firing I note that the powder residue is very evenly distributed.
Other baffles such as simple M's have tended to remain almost clean near the orifice, with heavier deposits around the outside.

Hard anodized for durability and easy cleaning, I clean my baffles frequently in an effort to preserve them.

Image
At these prices I want my gas 100 octane, leaded, and my windshield washed!

User avatar
emil
Member
Posts: 27
Joined: Tue Oct 02, 2007 8:37 am

Re: Suppressor Baffle Pics ONLY!

Post by emil » Wed Nov 16, 2011 4:53 pm

Guys

I found this picture on the internet.

Image

Do you know what this suppressor is ? I think it's AAC M4-2000 and AAC 762-SD

User avatar
Bendersquint
Industry Professional
Posts: 11359
Joined: Sat Jan 07, 2006 9:19 pm
Location: North Carolina
Contact:

Re: Suppressor Baffle Pics ONLY!

Post by Bendersquint » Wed Nov 16, 2011 5:08 pm

emil wrote:Guys

I found this picture on the internet.

Do you know what this suppressor is ? I think it's AAC M4-2000 and AAC 762-SD
Fixed the picture for you....

Image

That is a AAC 416-SD and an AAC 762SD.

-B

User avatar
delta9mda
Silent But Deadly
Posts: 2304
Joined: Wed Dec 07, 2005 4:32 pm
Location: miami, florida

Re: Suppressor Baffle Pics ONLY!

Post by delta9mda » Thu Nov 17, 2011 1:50 am

darn it, i made a boo-boo and will admit it. was looking at that scar and noticed the raised areas where the baffles are in the tube.

let me know if it needs to be removed.

nice catch B
NP

User avatar
emil
Member
Posts: 27
Joined: Tue Oct 02, 2007 8:37 am

Re: Suppressor Baffle Pics ONLY!

Post by emil » Sat Nov 19, 2011 4:19 pm

another one

Image

on the website where i found this picture was written that it was: "AWC - one of the last design patented by Charles "Mykey" Finn"

do you know what this suppressor is ?

iron.maiden
Silent But Deadly
Posts: 240
Joined: Fri Dec 18, 2009 3:07 pm

Re: Suppressor Baffle Pics ONLY!

Post by iron.maiden » Sun Nov 20, 2011 6:09 pm

40 monocore
Image

User avatar
winsor
Silent But Deadly
Posts: 363
Joined: Fri Nov 20, 2009 3:11 am
Location: Mars

Re: Suppressor Baffle Pics ONLY!

Post by winsor » Wed Nov 23, 2011 12:46 pm

Image

Is it M4?
░░ in search ☼f the silence ░░ ִ ִ ִ ִ ִ ִ ִ ִ ִ n☼ hunting , n☼ killing , just plinking ☼ ☼☼

User avatar
winsor
Silent But Deadly
Posts: 363
Joined: Fri Nov 20, 2009 3:11 am
Location: Mars

Re: Suppressor Baffle Pics ONLY!

Post by winsor » Sun Nov 27, 2011 9:37 pm

Head down products - HD22 with 6AL4V Titanium blast baffle.
1"odx5.3"long
Image

ImageImage
░░ in search ☼f the silence ░░ ִ ִ ִ ִ ִ ִ ִ ִ ִ n☼ hunting , n☼ killing , just plinking ☼ ☼☼

User avatar
winsor
Silent But Deadly
Posts: 363
Joined: Fri Nov 20, 2009 3:11 am
Location: Mars

Re: Suppressor Baffle Pics ONLY!

Post by winsor » Tue Nov 29, 2011 9:40 pm

:mrgreen:

Another next step on the journey.
Image
░░ in search ☼f the silence ░░ ִ ִ ִ ִ ִ ִ ִ ִ ִ n☼ hunting , n☼ killing , just plinking ☼ ☼☼

User avatar
winsor
Silent But Deadly
Posts: 363
Joined: Fri Nov 20, 2009 3:11 am
Location: Mars

Re: Suppressor Baffle Pics ONLY!

Post by winsor » Fri Dec 02, 2011 10:13 pm

Image
░░ in search ☼f the silence ░░ ִ ִ ִ ִ ִ ִ ִ ִ ִ n☼ hunting , n☼ killing , just plinking ☼ ☼☼

User avatar
winsor
Silent But Deadly
Posts: 363
Joined: Fri Nov 20, 2009 3:11 am
Location: Mars

Re: Suppressor Baffle Pics ONLY!

Post by winsor » Sat Dec 03, 2011 10:37 pm

Some are good. Do you want to hire me as your designer?

Here's a brand new.
Image

late one.
░░ in search ☼f the silence ░░ ִ ִ ִ ִ ִ ִ ִ ִ ִ n☼ hunting , n☼ killing , just plinking ☼ ☼☼

User avatar
winsor
Silent But Deadly
Posts: 363
Joined: Fri Nov 20, 2009 3:11 am
Location: Mars

Re: Suppressor Baffle Pics ONLY!

Post by winsor » Wed Dec 14, 2011 9:07 pm

Image

Is this the Isis 9 ?
░░ in search ☼f the silence ░░ ִ ִ ִ ִ ִ ִ ִ ִ ִ n☼ hunting , n☼ killing , just plinking ☼ ☼☼

User avatar
winsor
Silent But Deadly
Posts: 363
Joined: Fri Nov 20, 2009 3:11 am
Location: Mars

Re: Suppressor Baffle Pics ONLY!

Post by winsor » Fri Dec 16, 2011 9:20 am

Image

Tactical Innovations Stratus 22lr.
Diameter: 1.0″
Length: 5.01″
░░ in search ☼f the silence ░░ ִ ִ ִ ִ ִ ִ ִ ִ ִ n☼ hunting , n☼ killing , just plinking ☼ ☼☼

User avatar
winsor
Silent But Deadly
Posts: 363
Joined: Fri Nov 20, 2009 3:11 am
Location: Mars

Re: Suppressor Baffle Pics ONLY!

Post by winsor » Wed Jan 04, 2012 10:58 pm

Image

XTAR-9 baffle.
░░ in search ☼f the silence ░░ ִ ִ ִ ִ ִ ִ ִ ִ ִ n☼ hunting , n☼ killing , just plinking ☼ ☼☼

User avatar
winsor
Silent But Deadly
Posts: 363
Joined: Fri Nov 20, 2009 3:11 am
Location: Mars

Re: Suppressor Baffle Pics ONLY!

Post by winsor » Fri Jan 06, 2012 9:50 pm

.
.
Warlock II

Image

Image
░░ in search ☼f the silence ░░ ִ ִ ִ ִ ִ ִ ִ ִ ִ n☼ hunting , n☼ killing , just plinking ☼ ☼☼

User avatar
winsor
Silent But Deadly
Posts: 363
Joined: Fri Nov 20, 2009 3:11 am
Location: Mars

Re: Suppressor Baffle Pics ONLY!

Post by winsor » Fri Jan 06, 2012 9:52 pm

.
.

Spectre II

Image

Image

Image
░░ in search ☼f the silence ░░ ִ ִ ִ ִ ִ ִ ִ ִ ִ n☼ hunting , n☼ killing , just plinking ☼ ☼☼

User avatar
winsor
Silent But Deadly
Posts: 363
Joined: Fri Nov 20, 2009 3:11 am
Location: Mars

Re: Suppressor Baffle Pics ONLY!

Post by winsor » Fri Jan 06, 2012 9:55 pm

.
.
new Octane9
1.375"x7.7" can

Image

Image
░░ in search ☼f the silence ░░ ִ ִ ִ ִ ִ ִ ִ ִ ִ n☼ hunting , n☼ killing , just plinking ☼ ☼☼

User avatar
PaulNoiseLess
Silent But Deadly
Posts: 1249
Joined: Sun Dec 06, 2009 12:02 pm
Location: Australia
Contact:

Re: Suppressor Baffle Pics ONLY!

Post by PaulNoiseLess » Sat Jan 28, 2012 8:40 am

Hi,

A beautiful Form-1 MonoCore (.22 Hornet, 1.25x6.5).

Best,

Paul

Image
The future is not waiting for us, it is waiting within us ...

User avatar
jreinke
Silent But Deadly
Posts: 1224
Joined: Sat Jan 27, 2007 12:32 am
Location: WI, USA
Contact:

Re: Suppressor Baffle Pics ONLY!

Post by jreinke » Sat Jan 28, 2012 9:05 am

emil wrote:another one

Image

on the website where i found this picture was written that it was: "AWC - one of the last design patented by Charles "Mykey" Finn"

do you know what this suppressor is ?
Finn has only 3 patents to his name: 4,384,507; 4,588,043 & 4,590,698. The middle one is the only one that shows baffles and is the one that patented the 'M' and 'K' baffles.
[url=http://militarysignatures.com][img]http://militarysignatures.com/signatures/member1236.png[/img][/url]

User avatar
delta9mda
Silent But Deadly
Posts: 2304
Joined: Wed Dec 07, 2005 4:32 pm
Location: miami, florida

Re: Supressor Baffle Pics!

Post by delta9mda » Mon Feb 06, 2012 9:59 pm

emil wrote:Guys, is this cut of Thundertap ?

Image
no this is the H&K licensed finn baffles in a 9mm subgun can)
NP

User avatar
emil
Member
Posts: 27
Joined: Tue Oct 02, 2007 8:37 am

Re: Suppressor Baffle Pics ONLY!

Post by emil » Wed Feb 15, 2012 5:11 pm

This is SRT Conamche

Image


Image

Image

P.S. I need your help. It's been a long time since I look for Cobray M11/9 hammer dimension on the internet but I can't find anything interesting. Does anybody have blueprint with dimension or use this gun and could share that info?


Image

ChielScape
New Member
Posts: 2
Joined: Mon Feb 06, 2012 8:56 am

Re: Suppressor Baffle Pics ONLY!

Post by ChielScape » Thu Feb 16, 2012 5:47 pm

Hey guys, I was wondering what these asymmetrical cutouts actually do, because it's kinda bothering me and my symmetry-OCD :lol:

Image

zevdogs
Silent But Deadly
Posts: 240
Joined: Thu Jun 02, 2011 9:49 pm

Re: Suppressor Baffle Pics ONLY!

Post by zevdogs » Thu Feb 16, 2012 6:20 pm

chili17 wrote:
ChielScape wrote:Hey guys, I was wondering what these asymmetrical cutouts actually do, because it's kinda bothering me and my symmetry-OCD :lol:

Image
they direct the gas
Look at the ones I've done after they wear shot and you can see the burn patterns

Image

Image

Brand new and un shot

Image
Image
Image

ChielScape
New Member
Posts: 2
Joined: Mon Feb 06, 2012 8:56 am

Re: Suppressor Baffle Pics ONLY!

Post by ChielScape » Fri Feb 17, 2012 4:37 am

Thanks guys

User avatar
twodollarbill
Silent But Deadly
Posts: 420
Joined: Wed May 30, 2007 6:25 pm
Location: wisconsin

Re: Suppressor Baffle Pics ONLY!

Post by twodollarbill » Fri Feb 17, 2012 4:25 pm

zevdogs wrote: Look at the ones I've done after they wear shot and you can see the burn patterns

Image

Here is a pic I posted before.....after firing a few 22lr rounds when baffles are each rotated 180 degrees.
Evident by the residue, the blast strongly follows the cut of the mouse hole.
Image

Post Reply