300 win mag can

wolf · Post by **wolf** » Sun Oct 23, 2011 11:59 pm

I am MUCH more interested in the can they are having in the lathe you see in the background

delta9mda · Post by **delta9mda** » Mon Oct 24, 2011 12:04 am

not sure actually what it is. contact the bro i named as the builder, good guy and really knows his stuff.

they do a lot of prototype work i was told so no telling what it could really be.

iron.maiden · Post by **iron.maiden** » Mon Oct 24, 2011 6:24 am

delta9mda wrote:here is a basic 3d section of the can

this can will work damn good . congrats. Delta9mda

delta9mda · Post by **delta9mda** » Mon Oct 24, 2011 8:47 am

maiden, thanks man. as soon as i get vids they will be posted.

Hoop · Post by **Hoop** » Mon Oct 24, 2011 8:56 am

Nice work. What is the weight?

delta9mda · Post by **delta9mda** » Mon Oct 24, 2011 9:34 am

not sure on the weight, ill get that number for you.

Samson104 · Post by **Samson104** » Mon Oct 24, 2011 10:19 am

Outstanding desgine work and great fab work on his part , that things is built like a tank!!

It should work great

ChimeraPrecision · Post by **ChimeraPrecision** » Mon Oct 24, 2011 11:33 am

looks great, two questions though

what solid modeling program is that?

whats the reasoning behind stepping the insides of the baffles as opposed to smooth cones for easier expansion?

82nd airborne · Post by **82nd airborne** » Mon Oct 24, 2011 12:54 pm

ChimeraPrecision wrote:looks great, two questions though

what solid modeling program is that?

whats the reasoning behind stepping the insides of the baffles as opposed to smooth cones for easier expansion?

For one, if you step the inside you take alot more material off as opposed to just cutting a cone (which is easier). Having less material gives you a lighter can with more volume. Nothing makes you feel worse though than cutting the last step inside the can and miscalculating, and watching your baffle fall in half. I did that once and was soo mad. DRO pays off. CNC is even better.

82nd airborne · Post by **82nd airborne** » Mon Oct 24, 2011 12:56 pm

What made you decide not to scoop, bevel, or otherwise alter the entrance side of the baffle, Delta?

delta9mda · Post by **delta9mda** » Mon Oct 24, 2011 1:00 pm

Samson104 wrote:Outstanding desgine work and great fab work on his part , that things is built like a tank!!

It should work great

i think i sent you the 1st vid taken.

its not clear but the sound is good.

ill be posting "real" vids as soon as they are shot.

delta9mda · Post by **delta9mda** » Mon Oct 24, 2011 1:01 pm

ChimeraPrecision wrote:looks great, two questions though

what solid modeling program is that?

whats the reasoning behind stepping the insides of the baffles as opposed to smooth cones for easier expansion?

cad2010 3d mode (its what i learned on and used in various employment).

stepped the cones inside to save weight and cause turbulence.

delta9mda · Post by **delta9mda** » Mon Oct 24, 2011 1:05 pm

82nd airborne wrote:What made you decide not to scoop, bevel, or otherwise alter the entrance side of the baffle, Delta?

the cyclone's uniform baffles helped in that decision. the builder of the can and i decided on max accuracy so we left the baffles not scooped or cut.

the gun the can is on is tuned and blueprinted, shooting sub 1" groups at 350 yards. we didnt want to affect that and will have range report soon.

delta9mda · Post by **delta9mda** » Mon Oct 24, 2011 1:05 pm

82nd airborne wrote:
ChimeraPrecision wrote:looks great, two questions though

what solid modeling program is that?

whats the reasoning behind stepping the insides of the baffles as opposed to smooth cones for easier expansion?
For one, if you step the inside you take alot more material off as opposed to just cutting a cone (which is easier). Having less material gives you a lighter can with more volume. Nothing makes you feel worse though than cutting the last step inside the can and miscalculating, and watching your baffle fall in half. I did that once and was soo mad. DRO pays off. CNC is even better.

baffles were fully cnc'd.

delta9mda · Post by **delta9mda** » Mon Oct 24, 2011 3:04 pm

main tube is hastelloy c-4 grade.

ChimeraPrecision · Post by **ChimeraPrecision** » Mon Oct 24, 2011 3:26 pm

you got nickel-chromium-moly based alloy for a main tube....This thing must be the strongest can on earth. I'm a fan of your material selection delta.

What inconel is the blast baffle? Had some experience with 718 Inconel that we tried to saw and it rolled the teeth over on the band saw! Some seriously tough material we had to get some serious tools in to machine it

jimmym40a2 · Post by **jimmym40a2** » Mon Oct 24, 2011 3:32 pm

Thatlooks like a good solid design and great looking. Cant wait to see the video. Congtrats!

delta9mda · Post by **delta9mda** » Mon Oct 24, 2011 3:36 pm

thanks for the props bro. really this was a collaberation. i made recommendations and the builder said "well, i got this laying around and this and that" and i said go with it.

the builder knows his stuff as far as machining and welding etc. really.

Capt. Link. · Post by **Capt. Link.** » Tue Oct 25, 2011 6:17 pm

I bet that can rocks. give that man a cigar!

delta9mda · Post by **delta9mda** » Tue Oct 25, 2011 7:45 pm

as soon as i have vids they will be shown

delta9mda · Post by **delta9mda** » Wed Oct 26, 2011 12:21 am

there is a better than great chance another 300 win mag can will be made from ti and inconel or hastelloy.

checking on materials prices now.

mscott · Post by **mscott** » Wed Oct 26, 2011 4:27 am

delta9mda wrote:there is a better than great chance another 300 win mag can will be made from ti and inconel or hastelloy.

checking on materials prices now.

Please share that info if you find a good supplier. I'm submitting another form 1 for a .30 cal can with hopes of building a lightweight can for up to .308. My big magnum can is great for sound, but pretty heavy.

Golf_1911 · Post by **Golf_1911** » Wed Oct 26, 2011 12:25 pm

Tom,

Nice can. Have you test it?

delta9mda · Post by **delta9mda** » Wed Oct 26, 2011 12:37 pm

Golf_1911 wrote:Tom,

Nice can. Have you test it?

it has been shot a few times. not by me but the owner/ builder. sounds like a 22lr just as any good can would (outside with no berms, roofs etc). slightly loud when shot under a corrugated metal roof as would be expected. pretty much as good as any can i have heard.

first shots were taken using hot hornady 165's at something like 3200fps. as soon as i have real vids you will all see.

i tried to tell some people i dont make this s--t up and im not playing around.

Pat M · Post by **Pat M** » Wed Oct 26, 2011 7:01 pm

great looking suppressor

300 win mag can

Re: 300 win mag can

Re: 300 win mag can

Re: 300 win mag can

Re: 300 win mag can

Re: 300 win mag can

Re: 300 win mag can

Re: 300 win mag can

Re: 300 win mag can

Re: 300 win mag can

Re: 300 win mag can

Re: 300 win mag can

Re: 300 win mag can

Re: 300 win mag can

Re: 300 win mag can

Re: 300 win mag can

Re: 300 win mag can

Re: 300 win mag can

Re: 300 win mag can

Re: 300 win mag can

Re: 300 win mag can

Re: 300 win mag can

Re: 300 win mag can

Re: 300 win mag can

Re: 300 win mag can

Re: 300 win mag can