**STICKY** SilencerTalk Form 1 Suppressors - Links to Completed Builds
Posted: Fri Dec 02, 2011 11:26 am
There are some really nice Form 1 suppressors that have been constructed and documented on this forum.
Problem is that there isn't a 'sticky' section and some are older posts in danger of becoming lost to the black hole of cyberspace. Since we can't get the mods to sticky them in one place, I wanted to start a thread to include links to these builds. New builders could be missing out on lots of good data and ideas because the information is so scattered all over. This way everything is located in one easy-to-find reference (this thread) and won't get lost.
So, here is one simple guideline: ONLY ACTUAL COMPLETE BUILDS GO HERE. No links to SolidWorks pisc unless there is a finished can to go with it. Works in progress should be added once they are completed and test fired. Include the link to the thread, brief description of the can and the builders name.
If you have built a Form 1 suppressor, you've got every right to be proud of your accomplishment - post a link to the topic about your build in this thread.
Even if you didn't build it, but think it should be included, post that here too.
-----------------------------------------------------------------------------------------------------------------------------------------------------
Mongo's Suppressor Engineering 101: viewtopic.php?f=10&t=63889
AAC's Threading Guides: http://www.silencertests.com/threading/ ... 072709.pdf
Whisperfan's K-Baffle Tutorial: viewtopic.php?f=10&t=17116
Baffled's Barrel Threading Tutorial: viewtopic.php?f=10&t=53744
Problem is that there isn't a 'sticky' section and some are older posts in danger of becoming lost to the black hole of cyberspace. Since we can't get the mods to sticky them in one place, I wanted to start a thread to include links to these builds. New builders could be missing out on lots of good data and ideas because the information is so scattered all over. This way everything is located in one easy-to-find reference (this thread) and won't get lost.
So, here is one simple guideline: ONLY ACTUAL COMPLETE BUILDS GO HERE. No links to SolidWorks pisc unless there is a finished can to go with it. Works in progress should be added once they are completed and test fired. Include the link to the thread, brief description of the can and the builders name.
If you have built a Form 1 suppressor, you've got every right to be proud of your accomplishment - post a link to the topic about your build in this thread.
Even if you didn't build it, but think it should be included, post that here too.
-----------------------------------------------------------------------------------------------------------------------------------------------------
Mongo's Suppressor Engineering 101: viewtopic.php?f=10&t=63889
AAC's Threading Guides: http://www.silencertests.com/threading/ ... 072709.pdf
Whisperfan's K-Baffle Tutorial: viewtopic.php?f=10&t=17116
Baffled's Barrel Threading Tutorial: viewtopic.php?f=10&t=53744