Hi,
I have setup a new way of sending 3D Models to those not having 3D CAD.
I have tested and works fine for me but not sure it’s because I have the CAD’s installed.
Could you please click on the following link (PDF file with 3D capabilities) and check it out ?
http://www.silencer-plans.com/3D-PDF/MonoCore.pdf
It’s an assembly of the .223RM MonoCores I posted few days ago. You should be able to look at the whole model (rotate, move, zoom, …) as well as at all the Parts.
Thanks for your help.
Best,
Paul
Need help to test 3D PDF Documents (Suppressor 3D Model)
- PaulNoiseLess
- Silent But Deadly
- Posts: 1249
- Joined: Sun Dec 06, 2009 10:02 am
- Location: Australia
- Contact:
Need help to test 3D PDF Documents (Suppressor 3D Model)
The future is not waiting for us, it is waiting within us ...
Re: Need help to test 3D PDF Documents (Suppressor 3D Model)
Paul, that is pretty cool . It worked well for me.
- Capt. Link.
- Silent But Deadly
- Posts: 2829
- Joined: Wed Oct 17, 2007 9:05 pm
- Location: USA.
Re: Need help to test 3D PDF Documents (Suppressor 3D Model)
That's amazing Paul
The only reason after 243 years the government now wants to disarm you is they intend to do something you would shoot them for!
http://www.silencertalk.com/forum/viewtopic.php?f=10&t=79895
http://www.silencertalk.com/forum/viewtopic.php?f=10&t=79895
- PaulNoiseLess
- Silent But Deadly
- Posts: 1249
- Joined: Sun Dec 06, 2009 10:02 am
- Location: Australia
- Contact:
Re: Need help to test 3D PDF Documents (Suppressor 3D Model)
Hi,
Glad it Works: I have spent so much time trying to figure out how to share 3D models without the need of installing additional software …
OK, now let’s challenge this 3D PDF stuff (it’s heavy and takes time to load. Surf over the Parts with the tree button):
Full AR-15 model:
http://www.silencer-plans.com/3D-PDF/AR15.pdf
Full Ruger K-MK-III-6:
http://www.silencer-plans.com/3D-PDF/Ru ... -III-6.pdf
And, finally, an easy one, X-Baffles (.223 and .308 for Dual-Tube Cans, find the answer):
http://www.silencer-plans.com/3D-PDF/X-Baffles.pdf
Best,
Paul
Glad it Works: I have spent so much time trying to figure out how to share 3D models without the need of installing additional software …
OK, now let’s challenge this 3D PDF stuff (it’s heavy and takes time to load. Surf over the Parts with the tree button):
Full AR-15 model:
http://www.silencer-plans.com/3D-PDF/AR15.pdf
Full Ruger K-MK-III-6:
http://www.silencer-plans.com/3D-PDF/Ru ... -III-6.pdf
And, finally, an easy one, X-Baffles (.223 and .308 for Dual-Tube Cans, find the answer):
http://www.silencer-plans.com/3D-PDF/X-Baffles.pdf
Best,
Paul
The future is not waiting for us, it is waiting within us ...
- Enfield577
- Silent But Deadly
- Posts: 805
- Joined: Mon Mar 28, 2011 6:29 pm
- Location: New Zealand
Re: Need help to test 3D PDF Documents (Suppressor 3D Model)
Excellent job - well done
Of all the things I've lost it's my mind I miss the most
Re: Need help to test 3D PDF Documents (Suppressor 3D Model)
WTF Paul, that thing's loaded! You put a bullet in the bore!PaulNoiseLess wrote:Hi,
I have setup a new way of sending 3D Models to those not having 3D CAD.
I have tested and works fine for me but not sure it’s because I have the CAD’s installed.
Could you please click on the following link (PDF file with 3D capabilities) and check it out ?
http://www.silencer-plans.com/3D-PDF/MonoCore.pdf
It’s an assembly of the .223RM MonoCores I posted few days ago. You should be able to look at the whole model (rotate, move, zoom, …) as well as at all the Parts.
Thanks for your help.
Best,
Paul
[url=http://militarysignatures.com][img]http://militarysignatures.com/signatures/member1236.png[/img][/url]
- PaulNoiseLess
- Silent But Deadly
- Posts: 1249
- Joined: Sun Dec 06, 2009 10:02 am
- Location: Australia
- Contact:
Re: Need help to test 3D PDF Documents (Suppressor 3D Model)
Hi,
Yes, this F stuff just works fine. I’m happy, makes my live easier.
For those who never had the chance to have a K-Baffle in hand or just view one in 3D, here you have a punch of them with the Calibers I usually model for them.
Best,
Paul
http://www.silencer-plans.com/3D-PDF/Ks-and-Bullets.pdf
Yes, this F stuff just works fine. I’m happy, makes my live easier.
For those who never had the chance to have a K-Baffle in hand or just view one in 3D, here you have a punch of them with the Calibers I usually model for them.
Best,
Paul
http://www.silencer-plans.com/3D-PDF/Ks-and-Bullets.pdf
The future is not waiting for us, it is waiting within us ...
Re: Need help to test 3D PDF Documents (Suppressor 3D Model)
Paul, that is too flippen cool man!!! Hats off to you !
-
- Senior Silent Operator
- Posts: 132
- Joined: Sat Sep 24, 2011 12:02 am
Re: Need help to test 3D PDF Documents (Suppressor 3D Model)
Wonderful tool, thanks for testing it out and sharing it with us!
SC
SC
- PaulNoiseLess
- Silent But Deadly
- Posts: 1249
- Joined: Sun Dec 06, 2009 10:02 am
- Location: Australia
- Contact:
Re: Need help to test 3D PDF Documents (Suppressor 3D Model)
Hi,
If you are wonder why/how a 3-Lug mount works, here you have the answer:
http://www.silencer-plans.com/3D-PDF/3-LugMount.pdf
Don't miss the oportunity to isolate the Rear Cap and have a "closer" look inside, there you have the Key !
If I do remember correctly I did Post Plans (Blue Prints) for this one … not sure now … If someone remembers, post the Link so we have the full project available !
Best,
Paul
If you are wonder why/how a 3-Lug mount works, here you have the answer:
http://www.silencer-plans.com/3D-PDF/3-LugMount.pdf
Don't miss the oportunity to isolate the Rear Cap and have a "closer" look inside, there you have the Key !
If I do remember correctly I did Post Plans (Blue Prints) for this one … not sure now … If someone remembers, post the Link so we have the full project available !
Best,
Paul
The future is not waiting for us, it is waiting within us ...
- PaulNoiseLess
- Silent But Deadly
- Posts: 1249
- Joined: Sun Dec 06, 2009 10:02 am
- Location: Australia
- Contact:
Re: Need help to test 3D PDF Documents (Suppressor 3D Model)
Hi,
It’s always a pleasure and an honor to share with all of you. I have my shoulder broken so no fun for now, more is coming.
One thing to take into account: save the PDF files at your local hard drive in case you want to keep them.
Acrobat reader 10.x (free) can read the files fine. At some point, I’ll have to close the folder and just dedicate to Customers.
Hope you understand.
Best,
Paul
It’s always a pleasure and an honor to share with all of you. I have my shoulder broken so no fun for now, more is coming.
One thing to take into account: save the PDF files at your local hard drive in case you want to keep them.
Acrobat reader 10.x (free) can read the files fine. At some point, I’ll have to close the folder and just dedicate to Customers.
Hope you understand.
Best,
Paul
The future is not waiting for us, it is waiting within us ...
- PaulNoiseLess
- Silent But Deadly
- Posts: 1249
- Joined: Sun Dec 06, 2009 10:02 am
- Location: Australia
- Contact:
Re: Need help to test 3D PDF Documents (Suppressor 3D Model)
Hi,
This one is also very tricky: A real Quick Attach/Detach Mount !
http://www.silencer-plans.com/3D-PDF/TheLockingCone.pdf
One hand in the Barrel and one Hand in the Suppressor, 1/4 turn and done !
Look at how the middle of the FH is Machined and isolate Part 3 and 4 to have a “closer” look inside, look from both sides, it’s conical !
Best,
Paul
This one is also very tricky: A real Quick Attach/Detach Mount !
http://www.silencer-plans.com/3D-PDF/TheLockingCone.pdf
One hand in the Barrel and one Hand in the Suppressor, 1/4 turn and done !
Look at how the middle of the FH is Machined and isolate Part 3 and 4 to have a “closer” look inside, look from both sides, it’s conical !
Best,
Paul
The future is not waiting for us, it is waiting within us ...
-
- New Member
- Posts: 1
- Joined: Wed Sep 04, 2013 9:36 pm
Re: Need help to test 3D PDF Documents (Suppressor 3D Model)
Hi,If you need to test pdf documents often,you can create a pdf process tool by yourself.Then learn to test.
Re: Need help to test 3D PDF Documents (Suppressor 3D Model)
PaulNoiseLess wrote:Hi,
This one is also very tricky: A real Quick Attach/Detach Mount !
http://www.silencer-plans.com/3D-PDF/TheLockingCone.pdf
One hand in the Barrel and one Hand in the Suppressor, 1/4 turn and done !
Look at how the middle of the FH is Machined and isolate Part 3 and 4 to have a “closer” look inside, look from both sides, it’s conical !
Best,
Paul
PAUL,
links no longer work??
Gunny
Re: Need help to test 3D PDF Documents (Suppressor 3D Model)
I just deleted all the files due to high traffic on my site. I’ll upload the latest QD Mount model into a free storage site and post the link.
Re: Need help to test 3D PDF Documents (Suppressor 3D Model)
Please let us know when they are up. Thanks!
Re: Need help to test 3D PDF Documents (Suppressor 3D Model)
OK, no problem. Let me know what you want me to upload and I will (not “all”, please). There are many 3D PDF Models available in my GrabCAD.Com account, just follow this link: https://grabcad.com/paulnoiseless-1/projects
Re: Need help to test 3D PDF Documents (Suppressor 3D Model)
OK, here you have the final version of the 3D PDF QD Locking Cone (1/4 QD Mount). Don’t click on the link but go for a “Save Link As” and then open in your local drive (It’s a PDF file so no issues with Viruses or so): http://img11.imageshack.us/img11/6924/6xn.pdf
Re: Need help to test 3D PDF Documents (Suppressor 3D Model)
Paul, that's pretty damn slick. Hats off to you.
Re: Need help to test 3D PDF Documents (Suppressor 3D Model)
for some reason it is telling me that the pages have been removed. Anyway you could email them to me?
I Live in Fear and Danger Everyday but Occasionally I Leave Her and Go SHOOTING.
Re: Need help to test 3D PDF Documents (Suppressor 3D Model)
If there is a need to edit PDF files with original data try the software on PDF converter for Mac