Hi,
Chapter 0: This one is just an Intro.
OK, my Titanium Tubes already arrived at town.
My first project is a MonoCore: Fully built in a MiniLathe (9x20) and a Drill Press, not just symmetric holes in a raw (like Mosquito or MFJ or Dragonfly or others …). Little bit better Baffles.
Here you have the specs:
Titanium (Grade 9) Tube, Aluminum 6061/T6 Core and SS Blast (tbd).
6 inches OAL x 1 inch OD x 0.065 wall x 4.75-5.5 ounces.
.22LR-WM-MJL
This one is the first I did model in Suppressor Shoot 1.0 in COMSOL (beta) so it’s going to be a good chance to compare field vs. simulation. I already have the new Mics, just sent to calibration.
OK, so here you have Chapter 0: One of my Rhinos brings the bar stock to the Cave … more to come
Paul
MonoCores & MiniLathes Tutorial: Chapter 0
- PaulNoiseLess
- Silent But Deadly
- Posts: 1249
- Joined: Sun Dec 06, 2009 10:02 am
- Location: Australia
- Contact:
MonoCores & MiniLathes Tutorial: Chapter 0
The future is not waiting for us, it is waiting within us ...
- ghostdog662
- Silent But Deadly
- Posts: 655
- Joined: Thu Mar 06, 2008 3:19 pm
- Location: TX
- PaulNoiseLess
- Silent But Deadly
- Posts: 1249
- Joined: Sun Dec 06, 2009 10:02 am
- Location: Australia
- Contact:
Re: MonoCores & MiniLathes Tutorial: Chapter 0
Hi,
You’ve got chips now !
Paul
You’ve got chips now !
Paul
The future is not waiting for us, it is waiting within us ...