Not at all! Right there with you! However, with the M6A3 piston upper she'll eventually have, she won't get very dirty at all!
They are the Yankee Hill Machine EZ Pull Takedown Pin Set:
(Top item as a set or separately below)
I got them so I can break down or swap uppers more quickly if needed.
Here's a complete parts list:
LWRC Lower (2007 manufacture date)
Geissele Service Rifle Adjustable 2-Stage Trigger
Stag LPK with Ambidextrous Selector
YHM EZ Pull Takedown Pin Set
Magpul Enhanced Trigger Guard (Non-folding)
Magpul MIAD Basic Kit
Magpul MIAD 123 Battery Grip Core
PMAGs (20X30rd + 10X20rd)
Magpul XTM Panels
Note: KNS Gen II Anti-Rotational Pins were purchased but are not compatible with the Geissele trigger and are not needed.
Vickers Padded Sling
Here is the Duracoat recipe used by my gunsmith buddy:
2 tbsp Magpul FDE
1/4 tsp matte black
1/2 tsp hardener
Testors' Model Paint in selector markings with clear Duracoat over the top (Brownells Lacquer Sticks did not work for this application despite extensive research on instructions. The lacquer would not stay put.)
Edited to add:
I lucked into the last stripped LWRC lower from Coal Creek Armory. LWRC has them available now if you want one - just call them and ask for Tammy or Kelly and specify which caliber markings you want - 5.56mm or 6.8mm. The markings on the new ones are different than mine. They still have the pictograms but they have a full auto (infinity in a box) marking, which I don't like because it could cause raised eyebrows at the range when law enforcement is around.