Page 1 of 1

.22 LR Core for a NANO?

Posted: Tue Jul 05, 2011 4:09 pm
by .300WinMag
Can / would James be willing to make us all a second core in .22 LR?

(I am under the impression that this would not require a second stamp - correct?)

If it doesn't require a second stamp - how many folks beside myself would be interested in a .22 core?


TIA

Re: .22 LR Core for a NANO?

Posted: Tue Jul 05, 2011 5:16 pm
by Libertarian_Geek
.300WinMag wrote:Can / would James be willing to make us all a second core in .22 LR?

(I am under the impression that this would not require a second stamp - correct?)

If it doesn't require a second stamp - how many folks beside myself would be interested in a .22 core?


TIA
second stamp + now you're going to have to engrave the core = not worth it.

Re: .22 LR Core for a NANO?

Posted: Tue Jul 05, 2011 10:06 pm
by James DeGroat
Sorry won't be doing any .22 cores for the Nano's out there.

I am in the process of designing a .22lr suppressor that is similar to the Nano.

Re: .22 LR Core for a NANO?

Posted: Wed Jul 06, 2011 9:13 am
by strobro32
Try for a 3.1 X .98 inch wet micro 22LR can. It can be called the "TIC"

Re: .22 LR Core for a NANO?

Posted: Thu Jul 14, 2011 2:24 pm
by FSCJedi
James DeGroat wrote:Sorry won't be doing any .22 cores for the Nano's out there.

I am in the process of designing a .22lr suppressor that is similar to the Nano.
Where's that "popcorn eating" smiley? I anxiously await, James!

Re: .22 LR Core for a NANO?

Posted: Sun Aug 28, 2011 2:35 pm
by Artful
Gee, my 9mm core wet does real well for at least a box of 50 - are you trying for a dry can NANO size?

Re: .22 LR Core for a NANO?

Posted: Fri Oct 07, 2011 6:53 pm
by BEASLEY7
James DeGroat wrote:
I am in the process of designing a .22lr suppressor that is similar to the Nano.
Someone was hinting that this might materialize by the end of summer. Any idea when/if this will materialize? My other 3 DTA cans are going strong and I'd likely be in for a .22 also.

Re: .22 LR Core for a NANO?

Posted: Tue Apr 03, 2012 2:35 am
by James DeGroat
BEASLEY7 wrote:
James DeGroat wrote:
I am in the process of designing a .22lr suppressor that is similar to the Nano.
Someone was hinting that this might materialize by the end of summer. Any idea when/if this will materialize? My other 3 DTA cans are going strong and I'd likely be in for a .22 also.
Yep a DTA .22cal suppressor is in the works. I'm still a ways out before I start a production run but I do hope to get it on the market ASAP.

Re: .22 LR Core for a NANO?

Posted: Tue Apr 03, 2012 2:28 pm
by FSCJedi
James DeGroat wrote:
BEASLEY7 wrote:
James DeGroat wrote:
I am in the process of designing a .22lr suppressor that is similar to the Nano.
Someone was hinting that this might materialize by the end of summer. Any idea when/if this will materialize? My other 3 DTA cans are going strong and I'd likely be in for a .22 also.
Yep a DTA .22cal suppressor is in the works. I'm still a ways out before I start a production run but I do hope to get it on the market ASAP.
Awesome! Can't wait to see it! I'm sure Tannerman's will be ordering a few, too!