Beretta Jaguar

Talk about them here.

Moderators: mpallett, bakerjw

Post Reply
User avatar
Mr. Happy
New Member
Posts: 3
Joined: Wed Oct 16, 2013 8:58 pm

Beretta Jaguar

Post by Mr. Happy »

Hi I was wondering if anybody on this forum has ever threaded a jaguar extended barrel for use with a suppressor? Image
Which silencer would you recommend? Thanks for any help!
RJT
Silent But Deadly
Posts: 718
Joined: Wed Jul 31, 2013 3:42 pm
Location: SoTx

Re: Beretta Jaguar

Post by RJT »

No Jag experience, but AAC Element 2 would be my recommendation, or a SWR Specter II if on a smaller budget.
You keep using that word. I do not think it means what you think it means.
SRM
Silent But Deadly
Posts: 1825
Joined: Mon Mar 15, 2010 7:20 pm
Location: wyoming

Re: Beretta Jaguar

Post by SRM »

I would assume the od of the barrel is the same as a Cheetah so an adapter will be required. Need to measure it and post the findings.
User avatar
Mr. Happy
New Member
Posts: 3
Joined: Wed Oct 16, 2013 8:58 pm

Re: Beretta Jaguar

Post by Mr. Happy »

SRM wrote:I would assume the od of the barrel is the same as a Cheetah so an adapter will be required. Need to measure it and post the findings.
Will do! Thanks!
SRM
Silent But Deadly
Posts: 1825
Joined: Mon Mar 15, 2010 7:20 pm
Location: wyoming

Re: Beretta Jaguar

Post by SRM »

Mr. Happy wrote:
SRM wrote:I would assume the od of the barrel is the same as a Cheetah so an adapter will be required. Need to measure it and post the findings.
Will do! Thanks!
still waiting! :mrgreen:
User avatar
Mr. Happy
New Member
Posts: 3
Joined: Wed Oct 16, 2013 8:58 pm

Re: Beretta Jaguar

Post by Mr. Happy »

Sorry for the delay! I measure the outer diameter as 0.507" - does that make it doable?
SRM
Silent But Deadly
Posts: 1825
Joined: Mon Mar 15, 2010 7:20 pm
Location: wyoming

Re: Beretta Jaguar

Post by SRM »

refer to handgun section!
Post Reply