CVA hunter 44mag
-
- New Member
- Posts: 8
- Joined: Sat Nov 11, 2017 8:17 am
CVA hunter 44mag
I want to suppress a CVA hunter in 44mag. Thinking I will cut and thread the barrel at 16. It has a 1:20 twist. I reload and hope to shoot cast some. What would be a good suppressor for this?
Re: CVA hunter 44mag
A custom integral would be the way to go
300 blackout form 1: http://www.silencertalk.com/forum/viewtopic.php?f=10&t=137293
5.56 form 1:
http://www.silencertalk.com/forum/viewtopic.php?f=10&t=141800&p=955647#p955647
5.56 form 1:
http://www.silencertalk.com/forum/viewtopic.php?f=10&t=141800&p=955647#p955647
-
- New Member
- Posts: 8
- Joined: Sat Nov 11, 2017 8:17 am
Re: CVA hunter 44mag
What would the benefits be of an integral over a screw on?
Re: CVA hunter 44mag
Quieter
300 blackout form 1: http://www.silencertalk.com/forum/viewtopic.php?f=10&t=137293
5.56 form 1:
http://www.silencertalk.com/forum/viewtopic.php?f=10&t=141800&p=955647#p955647
5.56 form 1:
http://www.silencertalk.com/forum/viewtopic.php?f=10&t=141800&p=955647#p955647
-
- New Member
- Posts: 8
- Joined: Sat Nov 11, 2017 8:17 am
Re: CVA hunter 44mag
I am now considering a tba integrally suppressed 77/44. Compared to the thumper or octane 45 on a 16 inch 44mag barrel. How much quieter will the integral be?
Re: CVA hunter 44mag
That depends on a lot of factors, but it will be quieter unless the integral builder makes it really shitty. You can go with an overall shorter package with the same sound reduction of you go integral, or same length but quieter.Shane171975 wrote:I am now considering a tba integrally suppressed 77/44. Compared to the thumper or octane 45 on a 16 inch 44mag barrel. How much quieter will the integral be?
300 blackout form 1: http://www.silencertalk.com/forum/viewtopic.php?f=10&t=137293
5.56 form 1:
http://www.silencertalk.com/forum/viewtopic.php?f=10&t=141800&p=955647#p955647
5.56 form 1:
http://www.silencertalk.com/forum/viewtopic.php?f=10&t=141800&p=955647#p955647
Re: CVA hunter 44mag
An integral should be more quiet. Regardless.
There will always be a sonic crack at velocities over ~1100 fps. This occurs when the bullet breaks the speed of sound somewhere downrange. Suppressors cannot and do not make that sound any quieter (contrary to what you read from the media).
There will always be a sonic crack at velocities over ~1100 fps. This occurs when the bullet breaks the speed of sound somewhere downrange. Suppressors cannot and do not make that sound any quieter (contrary to what you read from the media).
I don't care what your chart says
-
- New Member
- Posts: 8
- Joined: Sat Nov 11, 2017 8:17 am
Re: CVA hunter 44mag
I was meaning with subsonic rounds, it's basically 800$ difference and was trying to justify in my mind which way to go, I could move the octane 45 to other guns, a plus for sure, but as mentioned the integral is much quieter. Having never been around suppressors, it's hard for me to understand what 10 dbs sound like
Re: CVA hunter 44mag
10db is a considerable amount.
Many people can't tell the difference between 1- 3 db.
But 10db will be a very noticable difference.
I understand if you want to swap it around to different guns. I have several that I move around all the time. That allows for a lot of enjoyment out of it all around.
But I have built 2 integrals and put them on two guns that I always enjoyed in the first place. I find myself using them more and more all the time.
Many people can't tell the difference between 1- 3 db.
But 10db will be a very noticable difference.
I understand if you want to swap it around to different guns. I have several that I move around all the time. That allows for a lot of enjoyment out of it all around.
But I have built 2 integrals and put them on two guns that I always enjoyed in the first place. I find myself using them more and more all the time.
I don't care what your chart says
Re: CVA hunter 44mag
-10dB is 10 times less peak sound pressure. (if hearing damage is your concern)Shane171975 wrote:I was meaning with subsonic rounds, it's basically 800$ difference and was trying to justify in my mind which way to go, I could move the octane 45 to other guns, a plus for sure, but as mentioned the integral is much quieter. Having never been around suppressors, it's hard for me to understand what 10 dbs sound like
-10dB sounds half as loud. (if stealth is your concern)
300 blackout form 1: http://www.silencertalk.com/forum/viewtopic.php?f=10&t=137293
5.56 form 1:
http://www.silencertalk.com/forum/viewtopic.php?f=10&t=141800&p=955647#p955647
5.56 form 1:
http://www.silencertalk.com/forum/viewtopic.php?f=10&t=141800&p=955647#p955647