Ruger 10/22 Tactical w/ Silencerco Warlock 2 accuracy issues.

Talk about them here.

Moderators: mpallett, bakerjw

Post Reply
REPR
New Member
Posts: 1
Joined: Sat Mar 10, 2018 2:10 pm

Ruger 10/22 Tactical w/ Silencerco Warlock 2 accuracy issues.

Post by REPR »

Hello all, This is my first post.... I hope it's in the right spot. I'm looking for some help solving an accuracy issue with my Ruger 10/22 Tactical w/ Silencerco Warlock 2. The point of impact shift is about 6 inches high and right (at about 20 yards) while using the suppressor. I am using the rimfire spacer ring included with the warlock 2. My Ruger Mark IV hits the same spot with or without the suppressor. Any help is appreciated.

See pics here: https://imgur.com/a/rcnGS
quiettime
Silent But Deadly
Posts: 605
Joined: Sat Dec 13, 2014 8:11 pm
Location: N FLA

Re: Ruger 10/22 Tactical w/ Silencerco Warlock 2 accuracy issues.

Post by quiettime »

Ruger is known for having some issues with muzzle threads and/or crooked bores on 10/22. My Warlock II shows almost no Poi shift on my CZ455.

You should be able to have your threads and crown recut concentric and square to the bore and that should fix your issue. While they're at it they could cut pistol threads or the Silencerco thread and eliminate the need for your spacer
quiettime
Silent But Deadly
Posts: 605
Joined: Sat Dec 13, 2014 8:11 pm
Location: N FLA

Re: Ruger 10/22 Tactical w/ Silencerco Warlock 2 accuracy issues.

Post by quiettime »

Any development?
Post Reply