1911 22 conversion ?

Questions and answers, photos, videos, and discussion.

Moderators: mpallett, bakerjw

Post Reply
primewish
New Member
Posts: 5
Joined: Sat Mar 03, 2012 5:12 pm

1911 22 conversion ?

Post by primewish » Fri Dec 14, 2012 3:42 am

Ok i have a Kimber 22 conversion kit. and I had a thread adapter for a can put on it. I am having cycling issues with it. I know i need to switch the main spring out but to what weight. If anyone here has done this please let me know what worked for you. I have tried everything from all the different grains that i could get my hands on but nothing works any help would be appreciated.

User avatar
Bendersquint
Industry Professional
Posts: 11359
Joined: Sat Jan 07, 2006 9:19 pm
Location: North Carolina
Contact:

Re: 1911 22 conversion ?

Post by Bendersquint » Fri Dec 14, 2012 3:58 am

primewish wrote:Ok i have a Kimber 22 conversion kit. and I had a thread adapter for a can put on it. I am having cycling issues with it. I know i need to switch the main spring out but to what weight. If anyone here has done this please let me know what worked for you. I have tried everything from all the different grains that i could get my hands on but nothing works any help would be appreciated.
You should not have to change anything when running it suppressed, what can are you using?

primewish
New Member
Posts: 5
Joined: Sat Mar 03, 2012 5:12 pm

Re: 1911 22 conversion ?

Post by primewish » Fri Dec 14, 2012 4:13 am

silencer co sparrow

User avatar
Bendersquint
Industry Professional
Posts: 11359
Joined: Sat Jan 07, 2006 9:19 pm
Location: North Carolina
Contact:

Re: 1911 22 conversion ?

Post by Bendersquint » Fri Dec 14, 2012 4:23 am

Shouldn't be having any issues with that combo.

What is the issue with cycling? FTF or FTE?

primewish
New Member
Posts: 5
Joined: Sat Mar 03, 2012 5:12 pm

Re: 1911 22 conversion ?

Post by primewish » Fri Dec 14, 2012 4:37 am

fte

User avatar
Bendersquint
Industry Professional
Posts: 11359
Joined: Sat Jan 07, 2006 9:19 pm
Location: North Carolina
Contact:

Re: 1911 22 conversion ?

Post by Bendersquint » Fri Dec 14, 2012 8:25 am

Chamber is too tight, doesn't have to do with the recoil spring

CALL KIMBER and see what they suggest, sounds like the chamber could use a nice honing.

primewish
New Member
Posts: 5
Joined: Sat Mar 03, 2012 5:12 pm

Re: 1911 22 conversion ?

Post by primewish » Fri Dec 14, 2012 4:15 pm

the thing is that it works fine without the can attached. I am not sure what else to try. I will give them a call but like i said before not sure she else to try

User avatar
Bendersquint
Industry Professional
Posts: 11359
Joined: Sat Jan 07, 2006 9:19 pm
Location: North Carolina
Contact:

Re: 1911 22 conversion ?

Post by Bendersquint » Fri Dec 14, 2012 4:24 pm

primewish wrote:the thing is that it works fine without the can attached. I am not sure what else to try. I will give them a call but like i said before not sure she else to try
Don't be scared to call the manufacturer. They DO test with suppressors.

Willing to bet that its a really tight chamber.

User avatar
kassenz
Silent But Deadly
Posts: 252
Joined: Mon Sep 17, 2007 1:48 am
Location: Seattle

Re: 1911 22 conversion ?

Post by kassenz » Mon Jan 20, 2014 2:27 am

I have found Ammo is a game changer

CCI makes a few subsonic rounds.

Remington have been jamming for me

Gemtech offers a 42 grain that isn't to greasy. Seems to work flawless in a few of my guns

Might need a ejector spring.
If you are feeling creative, remove the ejector spring. Heat it, pull it when It's red hot so it is 0.25 longer, then cool it in ice water, dry, cover in grease or lube. May work, may mess it up.

Kimber may send you out a replacement part, worth a try

User avatar
doubloon
Silent But Deadly
Posts: 11901
Joined: Thu Jan 01, 2009 1:02 am
Location: Houston-ish

Re: 1911 22 conversion ?

Post by doubloon » Mon Jan 20, 2014 11:10 am

primewish wrote:the thing is that it works fine without the can attached. I am not sure what else to try. I will give them a call but like i said before not sure she else to try
If I were going to hazard a guess ...

With a suppressor mounted on any of my firearms I get more "fouling", for lack of a better term, around the case mouth.

I don't want to posit too detailed an opinion on the source of this "fouling" so as not to derail the thread from your question but non-expert, armchair logic says some amount of added pressure is driving gas back into the chamber when the suppressor is mounted and carrying with it a certain amount of burnt and/or unburnt solids. This "junk" added to the outside of the case mouth may be providing just enough resistance to overcome the normal ejection process.

That said, we're back to the suggestion of honing/polishing the chamber.
http://www.youtube.com/watch?v=BDtd2jNIwAU MUSAFAR!
http://www.youtube.com/watch?v=8CrOL-ydFMI This is Water DavidW
Complete Form 1s http://www.silencertalk.com/forum/viewtopic.php?f=10&t=79895

Post Reply