sig mosquito TB

Questions and answers, photos, videos, and discussion.

Moderators: mpallett, bakerjw

Post Reply
User avatar
Texas'shooten
New Member
Posts: 9
Joined: Wed May 06, 2009 9:28 am
Location: Cypress Texas

sig mosquito TB

Post by Texas'shooten » Sat Feb 27, 2010 2:42 am

Any one bought the TB for the mosquito (from Gemtech) ? I have gotten two bad one's, the first I could not get the barrel screws into the second off just enough not to go. Dam I so wanted it to work!! Any idea's as for drop-in been there still trying. Joey at gemtech is really good C.S. on the first one but NEED it to work in case my p22 craps out. Need idea besides changing the gun for a factory TB version,,, and adapter :x

Stout
Silent But Deadly
Posts: 176
Joined: Mon Oct 19, 2009 8:19 am
Location: Helotes, TX

Re: sig mosquito TB

Post by Stout » Thu May 20, 2010 6:39 pm

I'm on my second barrel. The first one had the screw holes to high and they would not go in at all. Gemtech took the return and sent a new one right away and refunded my return shipping cost. Great CS although I would rather have gotten one that fit the first time.

The second barrel did go in, but it is tight. I can barely turn the takedown lever. I'll need to take it apart again and see if there is a burr or just clean up the area where the aluminum takedown cam goes.

I can say that the FTE's seem to have stopped. Knock on wood.

Post Reply