SWR HEMS II
Moderators: Kenny_SilencerCo, Andrew@Silencerco
SWR HEMS II
Looking for support to include pistons threaded for other calibers (.40 and 9mm) also a fixed barrel adapter threaded in 5/8x28. I noticed that SWR makes them for other suppressors. I ordered my suppressor over a year ago and at the time had asked Henry if there would be something available he said keep checking the website because it was in the works. I call all every couple months Henry will not return my phone calls anymore. If i hadn't already bought this suppressor (keep in mind I have never even shot it yet) I would never do business with SWR or Silencerco again. Thanks SWR.
-
- Silent But Deadly
- Posts: 1873
- Joined: Tue Apr 14, 2009 2:14 pm
Re: SWR HEMS II
I might have a 1/2 x28 piston . Will double check this afternoon.
- Bendersquint
- Industry Professional
- Posts: 11357
- Joined: Sat Jan 07, 2006 7:19 pm
- Location: North Carolina
- Contact:
Re: SWR HEMS II
I know they never did anything for 5/8-24.
I didn't know they even made a 1/2x28 piston, would have saved me from adding one to my list to make for my HEMS.
I didn't know they even made a 1/2x28 piston, would have saved me from adding one to my list to make for my HEMS.
-
- Silent But Deadly
- Posts: 1873
- Joined: Tue Apr 14, 2009 2:14 pm
Re: SWR HEMS II
False alarm . Trident 9 box.
- Andrew@Silencerco
- Silent But Deadly
- Posts: 180
- Joined: Mon Nov 12, 2012 6:37 pm
- Location: Utah
- Contact:
Re: SWR HEMS II
SWR never offered a 5/8-24 FM or a 1/2x28 piston for the HEMS 2. There was a 9/16x24 piston but those haven't been available for quite a while. I have some new old stock .45 pistons (16LH, 16RH, and .578) but that is it. I have been told we are planning on supporting the HEMS 2 in the future but at the moment we are swamped trying to keep up with our current production items.
Dirt,
Sorry you had a bad experience, if you would like to PM me about it I will see what I can do to change your mind about SWR. Thanks
Dirt,
Sorry you had a bad experience, if you would like to PM me about it I will see what I can do to change your mind about SWR. Thanks
- rcn11thacr
- Silent But Deadly
- Posts: 214
- Joined: Tue Nov 15, 2011 2:32 pm
- Location: North Fl.
Re: SWR HEMS II
I'd wager he can change your mind if you take him up on the offer. Your in a super small club if you have had problems with SWR that were not corrected. I've never bought from them but i can tell you they are on my "futures" list for the sole reason that there are so many customers have spoke well about them and how they handle customer service.if you would like to PM me about it I will see what I can do to change your mind about SWR.
Blackhorse Scout
- mpallett
- Elite Industry Professional
- Posts: 2876
- Joined: Mon Apr 25, 2005 9:28 am
- Location: MA
- Contact:
Re: SWR HEMS II
When I was part of SWR we made One (1) - 1/2x28 piston for the HEMSII.
I wanted to test 9mm through it and the HEMS-CT.
I still have it.
- Matthew
I wanted to test 9mm through it and the HEMS-CT.
I still have it.
- Matthew
Over weight Telco guy with a FFL/07 for hire
Re: SWR HEMS II
Well after months of being pissed and not even checking this site looks like I had responses. I still have yet to receive my suppressor. Not SWR' s fault. I live in Louisiana and we have to go through the state before the ATF. I talked to Andrew today and was told they were too busy at the time and are not currently supporting anything they sold. But he was nice enough to send me on my way to Matt with Stalking Rhino Industries. Matt I should say is a very nice person to deal with and is tooling up to support certain older models. Thanks Andrew. Matt, I will be in touch thank you.
- Speedshooter
- Member
- Posts: 28
- Joined: Fri May 02, 2008 11:42 am
- Location: North of Atlanta/Mall of GA
Re: SWR HEMS II
Folks, I really hate to see this happening too!
I am in the same situation as dirt. I have a like new HEMS 2 with the 578 piston. I would also like to find a couple of the pistons for different platforms since it seems that no further factory support is available.
I am in the same situation as dirt. I have a like new HEMS 2 with the 578 piston. I would also like to find a couple of the pistons for different platforms since it seems that no further factory support is available.
SWR HEMS II
GemTech Outback II
AWC Thundertrap .30
AWC Optima 5.56
AWC Amphibiam
AWC 77/22
GemTech Outback II
AWC Thundertrap .30
AWC Optima 5.56
AWC Amphibiam
AWC 77/22
- Bendersquint
- Industry Professional
- Posts: 11357
- Joined: Sat Jan 07, 2006 7:19 pm
- Location: North Carolina
- Contact:
Re: SWR HEMS II
We are tooling up to start providing these parts for the Trident/HEMS/GS40. They are coming.Speedshooter wrote:Folks, I really hate to see this happening too!
I am in the same situation as dirt. I have a like new HEMS 2 with the 578 piston. I would also like to find a couple of the pistons for different platforms since it seems that no further factory support is available.
- Speedshooter
- Member
- Posts: 28
- Joined: Fri May 02, 2008 11:42 am
- Location: North of Atlanta/Mall of GA
Re: SWR HEMS II
Hey, that's would be great. Drop me a PM when they become available.
SWR HEMS II
GemTech Outback II
AWC Thundertrap .30
AWC Optima 5.56
AWC Amphibiam
AWC 77/22
GemTech Outback II
AWC Thundertrap .30
AWC Optima 5.56
AWC Amphibiam
AWC 77/22
Re: SWR HEMS II
What would be awesome is an Octane45 upgrade for the HEMS II! Even if the same booster assy was used(since we all probably have multiple pistons). To jail break and install an Octane45 baffle stack shouldn't be too difficult? This was disscussed at shot show and I have been eagerly waiting to send more $$$ to SWR !!!
Re: SWR HEMS II
+1 on the HEMS upgrade.
- Bendersquint
- Industry Professional
- Posts: 11357
- Joined: Sat Jan 07, 2006 7:19 pm
- Location: North Carolina
- Contact:
Re: SWR HEMS II
Last I checked the Octane45 baffles will not fit in a HEMS tube.vipergts wrote:What would be awesome is an Octane45 upgrade for the HEMS II! Even if the same booster assy was used(since we all probably have multiple pistons). To jail break and install an Octane45 baffle stack shouldn't be too difficult? This was disscussed at shot show and I have been eagerly waiting to send more $$$ to SWR !!!
Re: SWR HEMS II
Both the SWR/HEMS II and Octane 45 tube diameters are listed as 1.375". The Octane 45 length is .250" longer @ 8.50". The last baffle could be modified to fit HEMS II tube, length wise. The same booster assy used. Be a great solution for guys that don't want to wait a year to go through the NFA process again. That's the cliff notes version of the conversation I had with Mike Pappas at the shot show this year except he suggested possibly changing the booster as well! Since I have multiple pistons for different applications already I would prefer to simplify the process with CTA baffle stack and new end cap. Every HEMS II owner I know would send their cans in for upgrade! Let's make it happen!!!Bendersquint wrote:Last I checked the Octane45 baffles will not fit in a HEMS tube.vipergts wrote:What would be awesome is an Octane45 upgrade for the HEMS II! Even if the same booster assy was used(since we all probably have multiple pistons). To jail break and install an Octane45 baffle stack shouldn't be too difficult? This was disscussed at shot show and I have been eagerly waiting to send more $$$ to SWR !!!
- Speedshooter
- Member
- Posts: 28
- Joined: Fri May 02, 2008 11:42 am
- Location: North of Atlanta/Mall of GA
Re: SWR HEMS II
Well...below is the official word on the HEMS II pistons from Silencerco....
Matt, hopefully, you and your firm can save the day!!!
----------------------------------------------------------------------------------------------
The HEMS II pistons we offered in .578x28, 16x1LH, 16x1RH, and 9/16x24. We no longer have stock on any of the HEMS II accessories. If you get in contact with Matt at Stalking Rhino Industries he should be able to help you out.
Thanks
Andrew Herbst
Customer Service
Silencerco, LLC
5511 S. 6055 W
West Valley City, UT. 84118
O 801.417.5384 | F 801.417.5002
Matt, hopefully, you and your firm can save the day!!!
----------------------------------------------------------------------------------------------
The HEMS II pistons we offered in .578x28, 16x1LH, 16x1RH, and 9/16x24. We no longer have stock on any of the HEMS II accessories. If you get in contact with Matt at Stalking Rhino Industries he should be able to help you out.
Thanks
Andrew Herbst
Customer Service
Silencerco, LLC
5511 S. 6055 W
West Valley City, UT. 84118
O 801.417.5384 | F 801.417.5002
SWR HEMS II
GemTech Outback II
AWC Thundertrap .30
AWC Optima 5.56
AWC Amphibiam
AWC 77/22
GemTech Outback II
AWC Thundertrap .30
AWC Optima 5.56
AWC Amphibiam
AWC 77/22
- Bendersquint
- Industry Professional
- Posts: 11357
- Joined: Sat Jan 07, 2006 7:19 pm
- Location: North Carolina
- Contact:
Re: SWR HEMS II
We will be, we are getting tooled up now so we can start producing them in bulk. We will be doing HEMS2, Trident, GS40 pistons in all of the thread pitches that SWR offered and some others that we have been asked to produce!Speedshooter wrote:Well...below is the official word on the HEMS II pistons from Silencerco....
Matt, hopefully, you and your firm can save the day!!!
----------------------------------------------------------------------------------------------
The HEMS II pistons we offered in .578x28, 16x1LH, 16x1RH, and 9/16x24. We no longer have stock on any of the HEMS II accessories. If you get in contact with Matt at Stalking Rhino Industries he should be able to help you out.
Thanks
Andrew Herbst
Customer Service
Silencerco, LLC
5511 S. 6055 W
West Valley City, UT. 84118
O 801.417.5384 | F 801.417.5002
Re: SWR HEMS II
Is a HEMII hearing safe shot dry on a 9mm?
If it doesn't splatter, shatter, burst or explode, it's not worth shooting.
- Bendersquint
- Industry Professional
- Posts: 11357
- Joined: Sat Jan 07, 2006 7:19 pm
- Location: North Carolina
- Contact:
Re: SWR HEMS II
Doesn't bother my ears, louder than a Trident though.strobro32 wrote:Is a HEMII hearing safe shot dry on a 9mm?
Re: SWR HEMS II
Do the Trident mounts fit the HEMSII? I can't believe I did not try that when I had both.
If it doesn't splatter, shatter, burst or explode, it's not worth shooting.
- Bendersquint
- Industry Professional
- Posts: 11357
- Joined: Sat Jan 07, 2006 7:19 pm
- Location: North Carolina
- Contact:
Re: SWR HEMS II
No they do not fit.strobro32 wrote:Do the Trident mounts fit the HEMSII? I can't believe I did not try that when I had both.
Re: SWR HEMS II
I'm glad you are making new mounts for the old SWR stuff.
If the BATFE ever gives me my HEMSII back, I'll would like to get a 1/2 x28 fixed mount and 1/2 x 28 piston for it.
If the BATFE ever gives me my HEMSII back, I'll would like to get a 1/2 x28 fixed mount and 1/2 x 28 piston for it.
If it doesn't splatter, shatter, burst or explode, it's not worth shooting.
- Bendersquint
- Industry Professional
- Posts: 11357
- Joined: Sat Jan 07, 2006 7:19 pm
- Location: North Carolina
- Contact:
Re: SWR HEMS II
Those won't be a problem at all, just let us know!strobro32 wrote:I'm glad you are making new mounts for the old SWR stuff.
If the BATFE ever gives me my HEMSII back, I'll would like to get a 1/2 x28 fixed mount and 1/2 x 28 piston for it.
Tooling up for all these as we speak!
- Fireman1291
- Silent But Deadly
- Posts: 3142
- Joined: Thu Jan 22, 2009 3:43 pm
- Location: Land O' lakes, FL
- Contact:
Re: SWR HEMS II
Hmm a multi caliber video on my HEMS2 would be cool.....as well as a jailbreak HEMS2 video....hmmmBendersquint wrote:Those won't be a problem at all, just let us know!strobro32 wrote:I'm glad you are making new mounts for the old SWR stuff.
If the BATFE ever gives me my HEMSII back, I'll would like to get a 1/2 x28 fixed mount and 1/2 x 28 piston for it.
Tooling up for all these as we speak!
Industry T&E
https://www.youtube.com/nfareviewchannelusa
Facebook
https://www.facebook.com/NFAreviewchannel
Instagram
https://www.instagram.com/nfareview
https://www.youtube.com/nfareviewchannelusa
https://www.facebook.com/NFAreviewchannel
https://www.instagram.com/nfareview
- Speedshooter
- Member
- Posts: 28
- Joined: Fri May 02, 2008 11:42 am
- Location: North of Atlanta/Mall of GA
Re: SWR HEMS II
Just out of curiosity, is there an ETA on production of the mounts?
SWR HEMS II
GemTech Outback II
AWC Thundertrap .30
AWC Optima 5.56
AWC Amphibiam
AWC 77/22
GemTech Outback II
AWC Thundertrap .30
AWC Optima 5.56
AWC Amphibiam
AWC 77/22