Alright I'm looking to purchase an osprey 45, as I want it to be compatible with my 9mm, 40, and 45. Where can I find the adapters to have it fit my glock 17 lwd barrel?
Thanks
Osprey 45 question
Moderators: Kenny_SilencerCo, Andrew@Silencerco
Re: Osprey 45 question
You'll need different pistons for each caliber, standard or metric:
9mm - 1/2x28 or 13.5x1 LHM
40s&w - 9/16x24 or 14.5x1 LHM
45acp - .578x28 or 16x1 LHM
http://www.superiorsilence.com/collecti ... ey-pistons
9mm - 1/2x28 or 13.5x1 LHM
40s&w - 9/16x24 or 14.5x1 LHM
45acp - .578x28 or 16x1 LHM
http://www.superiorsilence.com/collecti ... ey-pistons
Re: Osprey 45 question
rimshaker wrote:You'll need different pistons for each caliber, standard or metric:
9mm - 1/2x28 or 13.5x1 LHM
40s&w - 9/16x24 or 14.5x1 LHM
45acp - .578x28 or 16x1 LHM
http://www.superiorsilence.com/collecti ... ey-pistons
Depending on the barrel maker, the 13.5L can also be used on a 40 because Bar Sto makes their threaded 40 tube in that thread.
Re: Osprey 45 question
What would the 5/8x24 piston be used for? I know the fixed mount in that is 300BO. I thought I was getting the fixed but the piston showed up.
- Andrew@Silencerco
- Silent But Deadly
- Posts: 180
- Joined: Mon Nov 12, 2012 6:37 pm
- Location: Utah
- Contact:
Re: Osprey 45 question
The Osprey does not have a fixed mount option. In order to run it on a 300blk you will need the 5/8x24 piston and the fixed barrel spacer. Keep in mind that out piston cailber suppressors are only compatible with subsonic 300BLK.
Re: Osprey 45 question
Oops sorry mine is a octaine 45 HD
- Andrew@Silencerco
- Silent But Deadly
- Posts: 180
- Joined: Mon Nov 12, 2012 6:37 pm
- Location: Utah
- Contact:
Re: Osprey 45 question
Where did you order the fixed mount from? If it came from us give us a call and we can get you taken care of. If it came from a dealer try contacting them and asking for the correct part.
Re: Osprey 45 question
Got it. From another dealer on gunbroker. My fault got excited and ordered too fast. I won't need the piston and fixed mount right?
- Andrew@Silencerco
- Silent But Deadly
- Posts: 180
- Joined: Mon Nov 12, 2012 6:37 pm
- Location: Utah
- Contact:
Re: Osprey 45 question
No, if you want to run the piston setup you will need a fixed barrel spacer as well. However you will be better off with just the fixed mount for the Octane.