Page 1 of 1
Could an Octane 45 be sent in for 9mm baffles?
Posted: Tue Jul 01, 2014 4:45 pm
by DrDremel
Making it an extra quiet 9mm silencer?
Re: Could an Octane 45 be sent in for 9mm baffles?
Posted: Tue Jul 01, 2014 5:03 pm
by RJT
Nope, can't change bore diameter once caliber has been designated.
Re: Could an Octane 45 be sent in for 9mm baffles?
Posted: Tue Jul 01, 2014 10:20 pm
by rimshaker
Guessing that also applies to just swapping the endcaps?
Re: Could an Octane 45 be sent in for 9mm baffles?
Posted: Tue Jul 01, 2014 10:24 pm
by RJT
Apparently not. Saker 7.62 can be fitted with a 5.56 endcap. Must not be considered a silencer part, but baffles are another story.
Re: Could an Octane 45 be sent in for 9mm baffles?
Posted: Wed Jul 02, 2014 1:12 am
by jt526
The endcap on the saker isn't really an endcap in the sense that it holds the baffles in, the endcap on the saker is just an accessory. I'm betting ATF would have a negative opinion of putting the 5.56 on the 7.62 though. But I also thought that sig brace thing would be shot down after what some yahoos are doing with it, sooooo...there's that.