Hi there, just got my specter ii just a few days ago. Immediately shot 300 rd through it and then broke it down to clean, dang it's hard to get some of that crust off.
Anyway putting it back together, the front cap has the top of the rubber o ring showing. I don't remember it showing before I cleaned it. I know it's supposed to have a gap there but enough to show part of the rubber ring? Yes I cranked it down as much as I could to where it was difficult to remove, probably too tight.
Thanks in advance for your help
Question about my specter ii
Moderators: Kenny_SilencerCo, Andrew@Silencerco
-
- Silent But Deadly
- Posts: 1873
- Joined: Tue Apr 14, 2009 2:14 pm
Re: Question about my specter ii
You sure the stack was "clicked" all the way together . Post pic.
Re: Question about my specter ii
This is as far as it wants to go. Not sure if they all click and stick together but positive they are seamlessly fitting together
- mpallett
- Elite Industry Professional
- Posts: 2876
- Joined: Mon Apr 25, 2005 9:28 am
- Location: MA
- Contact:
Re: Question about my specter ii
Did you try reversing the caps?
basically reverse everything in the tube.
basically reverse everything in the tube.
Over weight Telco guy with a FFL/07 for hire
Re: Question about my specter ii
Just tried that but no luck. Will fool with it some more.
Re: Question about my specter ii
wow ...i had the baffles going in the wrong direction! i feel stupid. good thing i didn't shoot with it!