Page 1 of 1
Front cap broke
Posted: Sun Aug 23, 2015 1:57 pm
by Javieru6
I just picked up my warlock 2 Saturday and today Sunday I shot it for the first time on my sbr and it shot off the front cap which a piece is missing and chipped 2 of my last baffles. I'm using it through a 4.5 barrel through ccmg is there any warranty or something on the warlock or has anyone had any problems like this
Re: Front cap broke
Posted: Sun Aug 23, 2015 2:05 pm
by 66427vette
pics?
Re: Front cap broke
Posted: Sun Aug 23, 2015 2:23 pm
by Javieru6
66427vette wrote:pics?
sorry cant seem to find the option to put a picture.
Re: Front cap broke
Posted: Sun Aug 23, 2015 2:49 pm
by 66427vette
Re: Front cap broke
Posted: Sun Aug 23, 2015 2:53 pm
by Javieru6
I emailed you the pictures. Thanks. I also sent another picture of the spacing to the barrel to the end cap. The spacing looks good
Re: Front cap broke
Posted: Mon Aug 24, 2015 9:15 am
by Jstam
Javieru6,
The warlock is covered under a full lifetime warranty. If you will email
[email protected] with the issue, your address, phone and the serial number off of your suppressor we can get you taken care of. It is, however, odd that it would have an issue so soon. It is possible that the threads on your barrel may be too long causing the suppressor to move past the O-rings. This can cause some concentricity issues.Please don't hesitate to contact us.
Best Regards,
Jacob Stam
Silencerco
Customer Service Manager
Re: Front cap broke
Posted: Mon Aug 24, 2015 10:02 pm
by doubloon
Javieru6 wrote:66427vette wrote:pics?
sorry cant seem to find the option to put a picture.
You have to upload pictures to something like imgur then put the link in a post like this
http://i.imgur.com/cpE02HA.jpg
or this
Code: Select all
[img]http://i.imgur.com/cpE02HA.jpg[/img]
Re: Front cap broke
Posted: Mon Aug 31, 2015 3:10 pm
by mars
Jstam wrote:Javieru6,
The warlock is covered under a full lifetime warranty. If you will email
[email protected] with the issue, your address, phone and the serial number off of your suppressor we can get you taken care of. It is, however, odd that it would have an issue so soon. It is possible that the threads on your barrel may be too long causing the suppressor to move past the O-rings. This can cause some concentricity issues.Please don't hesitate to contact us.
Best Regards,
Jacob Stam
Silencerco
Customer Service Manager
And this is why i have 2 of their cans, and i'm eyeballing another. Top notch!
