Silencerco Picture Thread
Moderators: Kenny_SilencerCo, Andrew@Silencerco
Re: Silencerco Picture Thread
Double tap
Re: Silencerco Picture Thread
They are just about level with the top of the can but the are the stock Glock sights.smilner01 wrote: can you see the sights on your glock over the osprey?
- Fireman1291
- Silent But Deadly
- Posts: 3142
- Joined: Thu Jan 22, 2009 3:43 pm
- Location: Land O' lakes, FL
- Contact:
Re: Silencerco Picture Thread
Yeah....I'm gonna need the full rundown on thatjh1990 wrote:
Industry T&E
https://www.youtube.com/nfareviewchannelusa
Facebook
https://www.facebook.com/NFAreviewchannel
Instagram
https://www.instagram.com/nfareview
https://www.youtube.com/nfareviewchannelusa
https://www.facebook.com/NFAreviewchannel
https://www.instagram.com/nfareview
Re: Silencerco Picture Thread
Rossi 92 in .357 magnum. Chopped to 16" and threaded 13.5x1LH with 9mm Osprey. Only 38 specials through the suppressor though. It is QUIET with 158 grain ammoFireman1291 wrote:Yeah....I'm gonna need the full rundown on that
Re: Silencerco Picture Thread
I like the .357
Re: Silencerco Picture Thread
Loving my sparrow
Re: Silencerco Picture Thread
just got my F4 back yesterday just over 5 months wait time for CO and just picked my SS Sparrow here is my Kimber .22LR conversion host.
Thanks for a great product, looking forward to my next purchase!
Thanks for a great product, looking forward to my next purchase!
- O2HeN2
- Silent But Deadly
- Posts: 192
- Joined: Fri Dec 09, 2011 12:13 am
- Location: Colorado Springs, CO
Re: Silencerco Picture Thread
Ok, I'm settling back down now. Initially, your blacked out serial number looked like a jagged hole blown in the side of the can!
O2
O2
When seconds count, the police are mere minutes away...
You are the FIRST responder. Police, fire and medical are SECOND responders.
You are the FIRST responder. Police, fire and medical are SECOND responders.
Re: Silencerco Picture Thread
Yeah I wouldent have posted it if so! My photo shop skills are minimal at best!O2HeN2 wrote:Ok, I'm settling back down now. Initially, your blacked out serial number looked like a jagged hole blown in the side of the can!
O2
- Fireman1291
- Silent But Deadly
- Posts: 3142
- Joined: Thu Jan 22, 2009 3:43 pm
- Location: Land O' lakes, FL
- Contact:
Re: Silencerco Picture Thread
Who did your thread job? And cost?yamatitan wrote:Loving my sparrow
Industry T&E
https://www.youtube.com/nfareviewchannelusa
Facebook
https://www.facebook.com/NFAreviewchannel
Instagram
https://www.instagram.com/nfareview
https://www.youtube.com/nfareviewchannelusa
https://www.facebook.com/NFAreviewchannel
https://www.instagram.com/nfareview
Re: Silencerco Picture Thread
Tim at hanging tree Armory, 70 dollars including shipping. He doesnt do thread protectors so I spent 10 extra on that from ewk I beleive.
Re: Silencerco Picture Thread
I just got my upper back from our fellow forum member redtazdog. He put together a dedicated 22lr upper for me using one of his 4.5 inch barrels with Sparrow threads. My SS Sparrow fit perfectly into the Troy Alpha Rail and protrudes by about 1 inch. Here's a few photos for you guys. And BTW, if you're ever in the market for a custom threaded 22lr AR15 barrel I cant recommend redtazdog enough. He does amazing work.
-
- Silent But Deadly
- Posts: 160
- Joined: Fri Dec 09, 2011 8:22 pm
- Location: North Carolina
Re: Silencerco Picture Thread
Building something like this on this receiver thoughFlipz wrote:I just got my upper back from our fellow forum member redtazdog. He put together a dedicated 22lr upper for me using one of his 4.5 inch barrels with Sparrow threads. My SS Sparrow fit perfectly into the Troy Alpha Rail and protrudes by about 1 inch. Here's a few photos for you guys. And BTW, if you're ever in the market for a custom threaded 22lr AR15 barrel I cant recommend redtazdog enough. He does amazing work.
Receiver got approved friday and did the form correction on my suppressor two fridays ago, just need to get the upper. Redtazdog does good stuff?
Re: Silencerco Picture Thread
Love the stock! Dont forget to post pics when its all together. And yes, Redtazdog does great work. I highly recommend him as do many others.
The lower Im currently using is from my factory YHM 5.5 inch 9mm SBR (less the Hahn magblock when the 22lr upper is installed). Im going to send in a set of forms sometime soon for another SBR lower to be used for this 22lr upper and a Mk18 upper.
The lower Im currently using is from my factory YHM 5.5 inch 9mm SBR (less the Hahn magblock when the 22lr upper is installed). Im going to send in a set of forms sometime soon for another SBR lower to be used for this 22lr upper and a Mk18 upper.
Last edited by Flipz on Tue Jul 24, 2012 8:26 pm, edited 1 time in total.
Re: Silencerco Picture Thread
Hey Sleeper, can you give me more info on that stock?
-
- Silent But Deadly
- Posts: 160
- Joined: Fri Dec 09, 2011 8:22 pm
- Location: North Carolina
Re: Silencerco Picture Thread
It's a Nordic Components retractable. They are a little pricey but it is a solid piece. The only problem with it is that it will kind of interfere with the dust cover is full retracted. It doesn't impede operation or anything, it just keeps it from opening all the way. Once I get my SS Sparrow I am dubbing this the poor mans honey badger.
Re: Silencerco Picture Thread
Contender SBR w/ Sparrow.
- O2HeN2
- Silent But Deadly
- Posts: 192
- Joined: Fri Dec 09, 2011 12:13 am
- Location: Colorado Springs, CO
Re: Silencerco Picture Thread
Mind if I ask a few questions? That looks like the original Contender frame, correct? Where did you choose to engrave it? Is the rifle stock original or aftermarket?Cannon500 wrote:Contender SBR w/ Sparrow.
I have a contender pistol and I've been thinking of turning it into an SBR, and it looks like you've done exactly what I'm planning on doing! The first issue I'm faced with is where to get a rifle stock!
Any other words of sage advice for SBRing an original Contender?
O2
When seconds count, the police are mere minutes away...
You are the FIRST responder. Police, fire and medical are SECOND responders.
You are the FIRST responder. Police, fire and medical are SECOND responders.
Re: Silencerco Picture Thread
Yes, thats a 90's vintage Contender, way before the G2's.
I intended to have the engraving done on the bottom flats on either side of the trigger assembly. The local engraver couldn't manage that, and I was too impatient to find someone else. It's engraved on the left side of the reciever along the bottom edge, on either side of the trigger pin.
The stock is a factory youth model -- I'd like to find another one to cut down even further for my kids. Stocks are available but I haven't found any real cheap. Last time I checked, there were a few on ebay, just make sure you're not getting the G2 version. Another option is Ed's TC. I don't think he keeps his website up to date, so you'd have to call to see what he has.
I intended to have the engraving done on the bottom flats on either side of the trigger assembly. The local engraver couldn't manage that, and I was too impatient to find someone else. It's engraved on the left side of the reciever along the bottom edge, on either side of the trigger pin.
The stock is a factory youth model -- I'd like to find another one to cut down even further for my kids. Stocks are available but I haven't found any real cheap. Last time I checked, there were a few on ebay, just make sure you're not getting the G2 version. Another option is Ed's TC. I don't think he keeps his website up to date, so you'd have to call to see what he has.
-
- Member
- Posts: 20
- Joined: Mon Aug 27, 2012 5:44 pm
- Location: Kalispell, MT
Re: Silencerco Picture Thread
Got my Sparrow
- Gary_SilencerCo
- Silent But Deadly
- Posts: 258
- Joined: Mon Nov 22, 2010 12:17 pm
Re: Silencerco Picture Thread
that is gonna be alot of funJuan916Ebay wrote:Got my Sparrow
- Fireman1291
- Silent But Deadly
- Posts: 3142
- Joined: Thu Jan 22, 2009 3:43 pm
- Location: Land O' lakes, FL
- Contact:
Re: Silencerco Picture Thread
Finally got another bolt action 22! So fun! Bought this savage FV-SR already done up with boyds stock, scope, bipod, metal trigger guard, bottom plate and spare mags.
Industry T&E
https://www.youtube.com/nfareviewchannelusa
Facebook
https://www.facebook.com/NFAreviewchannel
Instagram
https://www.instagram.com/nfareview
https://www.youtube.com/nfareviewchannelusa
https://www.facebook.com/NFAreviewchannel
https://www.instagram.com/nfareview
Re: Silencerco Picture Thread
Oh its gonna be a fun weekend! The Osprey is gonna be standing in until my Octane9 HD is approved.
-
- New Member
- Posts: 4
- Joined: Sun Mar 04, 2012 3:25 pm
Re: Silencerco Picture Thread
details please? that looks awesome.Flipz wrote:Oh its gonna be a fun weekend! The Osprey is gonna be standing in until my Octane9 HD is approved.