Octane-9 and the 300 BLK???

eastern_hunter · Post by **eastern_hunter** » Sat Apr 23, 2011 1:57 am

I saw the previous post on ratings for the Octane-9. Did not understand the answer.

Is the Octane-9 HD going to be safely useable with subsonic 240 gr projectile loads for the 300 BLK?

Sure would appreciate the information!

Mike

Bendersquint · Post by **Bendersquint** » Sat Apr 23, 2011 5:49 am

eastern_hunter wrote:I saw the previous post on ratings for the Octane-9. Did not understand the answer.

Is the Octane-9 HD going to be safely useable with subsonic 240 gr projectile loads for the 300 BLK?

Sure would appreciate the information!

Mike

Yes it will be safe for subsonic loads.

eastern_hunter · Post by **eastern_hunter** » Sat Apr 23, 2011 8:03 am

Any recommendations for mating the Octane-9 HD to a 5/8x24 threaded barrel? Can has been ordered with 3 lug and 1/2x28 adapter.

Bendersquint · Post by **Bendersquint** » Sat Apr 23, 2011 8:50 am

eastern_hunter wrote:Any recommendations for mating the Octane-9 HD to a 5/8x24 threaded barrel? Can has been ordered with 3 lug and 1/2x28 adapter.

Adapter or rethread your barrel!

-B

eastern_hunter · Post by **eastern_hunter** » Sat Apr 23, 2011 8:55 am

Sorry ... badly phrased ... where can I buy an adapter? Don't want to change the threads on the barrel.

Really do appreciate the advise!!! Thank you.

mpallett · Post by **mpallett** » Sat Apr 23, 2011 9:02 am

eastern_hunter wrote:Sorry ... badly phrased ... where can I buy an adapter? Don't want to change the threads on the barrel.

Really do appreciate the advise!!! Thank you.

I am pretty sure we have 5/8 x 24 mounts planned for it.

eastern_hunter · Post by **eastern_hunter** » Sat Apr 23, 2011 1:16 pm

<chuckle> OK ... was ordered with 1/2x28 and 3 lug ... just have to buy one more!

Thanks!

LonghunterCO · Post by **LonghunterCO** » Mon Jul 04, 2011 7:38 pm

I had asked this question of M3 and he said that he was going to ask SWR...anyway I am here so, is the Octane-9 (HD if that matters) ok for 300blk use -subsonic and/or non-subsonic?

robpiat · Post by **robpiat** » Mon Jul 04, 2011 7:49 pm

My 9mm gets really hot shooting 300 subs. If you have a 308 can, I'd use that.

mpallett · Post by **mpallett** » Tue Jul 05, 2011 4:23 pm

LonghunterCO wrote:I had asked this question of M3 and he said that he was going to ask SWR...anyway I am here so, is the Octane-9 (HD if that matters) ok for 300blk use -subsonic and/or non-subsonic?

Subsonic only

LonghunterCO · Post by **LonghunterCO** » Tue Jul 05, 2011 6:52 pm

mpallett wrote:
LonghunterCO wrote:I had asked this question of M3 and he said that he was going to ask SWR...anyway I am here so, is the Octane-9 (HD if that matters) ok for 300blk use -subsonic and/or non-subsonic?

Subsonic only

Thanks!

grinnie · Post by **grinnie** » Wed Jul 13, 2011 8:40 pm

mpallett wrote:
LonghunterCO wrote:I had asked this question of M3 and he said that he was going to ask SWR...anyway I am here so, is the Octane-9 (HD if that matters) ok for 300blk use -subsonic and/or non-subsonic?

Subsonic only

Is there a limit to barrel length? I would like to use my soon to be Octane HD on a 10.5" barrel.

Octane-9 and the 300 BLK???

Octane-9 and the 300 BLK???

Re: Octane-9 and the 300 BLK???

Re: Octane-9 and the 300 BLK???

Re: Octane-9 and the 300 BLK???

Re: Octane-9 and the 300 BLK???

Re: Octane-9 and the 300 BLK???

Re: Octane-9 and the 300 BLK???

Re: Octane-9 and the 300 BLK???

Re: Octane-9 and the 300 BLK???

Re: Octane-9 and the 300 BLK???

Re: Octane-9 and the 300 BLK???

Re: Octane-9 and the 300 BLK???